camaroracer1992
07-18-2008, 01:31 PM
82-92 camaro firebird TPI dual fan setup with upper radiator mount and wiring harness – $70
LIKE NEW CHROME upper radiator cover for 3rd gen (extremely hard to find) - $200
82-92 camaro firebird v8 radiator with trans cooler, used for about 2000 street miles purchase NEW from NAPA in aug of 06 - $70
Fabricated aluminum valve covers permieter bolt pattern - $30
7/16-20 SBC std spacing rocker stud girdles - $20
¾-24 lock nuts for rockers - $10
10lb NOS nitrous tank with high flow valve - $100
700r4 trans with convertor specs are:
Hardened input shaft/ Drum assembly (30 spline)
Extreme duty shell/bearing assembly
Extreme duty reaction carrier shaft and bearings
Extreme Duty rear 5 pinion planet gear
Extreme Duty front 5 pinion planet gear
TCI Reverse Manual Valve Body
Elevated Pressure Regulator Spring
13 Vane Pump Installed
29 Element sprag
10 Clutch pack installed (alto red)
Alto Carbon fiber band
Billet Servo (more apply then the corvette servo)
0.500 Mega Valve
Polished Transmission Pan
Lokar Firewall mount dipstick
9” convertor (stalls at approx 3000 rpms) (this convertor has no lockup capabilities) - $1000
14x3 air cleaner with drop base and paper filter chrome (new) - $10
98-02 Camaro z28/trans am rear discs and pads (approx 8k on them) - $50
LIKE NEW CHROME upper radiator cover for 3rd gen (extremely hard to find) - $200
82-92 camaro firebird v8 radiator with trans cooler, used for about 2000 street miles purchase NEW from NAPA in aug of 06 - $70
Fabricated aluminum valve covers permieter bolt pattern - $30
7/16-20 SBC std spacing rocker stud girdles - $20
¾-24 lock nuts for rockers - $10
10lb NOS nitrous tank with high flow valve - $100
700r4 trans with convertor specs are:
Hardened input shaft/ Drum assembly (30 spline)
Extreme duty shell/bearing assembly
Extreme duty reaction carrier shaft and bearings
Extreme Duty rear 5 pinion planet gear
Extreme Duty front 5 pinion planet gear
TCI Reverse Manual Valve Body
Elevated Pressure Regulator Spring
13 Vane Pump Installed
29 Element sprag
10 Clutch pack installed (alto red)
Alto Carbon fiber band
Billet Servo (more apply then the corvette servo)
0.500 Mega Valve
Polished Transmission Pan
Lokar Firewall mount dipstick
9” convertor (stalls at approx 3000 rpms) (this convertor has no lockup capabilities) - $1000
14x3 air cleaner with drop base and paper filter chrome (new) - $10
98-02 Camaro z28/trans am rear discs and pads (approx 8k on them) - $50