shocks

[WayFast84]

I am kind of on a tight budget and need shocks for my 84 firebird really bad. I was looking at KYB Gr-2 and was wondering If they were a good shock for the money, I wont need them for carving corners because my car is set up more as a street-strip. I think anything will be a great upgrade then my worn out stock shocks, But I need to figure it out soon, because I would like to send it out by august 2nd to have the shocks installed and the car inspected.

[Mike]

whats the price difference between those and a bilstien or koni yellow?

[Tru2Chevy]

Install them yourself Matt....it's very easy.

And do you want a more drag oriented shock, or a street oriented shock? Gotta compromise somewhere.....

- Justin

[//<86TA>\\]

whats the price difference between those and a bilstien or koni yellow?

KYBs are something like 300+ for a complete set, Koni/bilstien are more upwards of 700 a set
________
****tube Xxx (http://www.****tube.com/)

[WayFast84]

Install them yourself Matt....it's very easy.

And do you want a more drag oriented shock, or a street oriented shock? Gotta compromise somewhere.....

- Justin

I would love to install them my self, But Ive come to a conclusion that when I do things my self, they either catch on fire, or end up unfinished and some one else's nightmare.

I would Like a more street oriented shock, after all, the hour it will take me just to get to a track verses then 14 seconds( estimate) it will take me to get down the track.

[Tru2Chevy]

If that 400 is really pushing close to 400 hp, you should be looking more at mid-low 12 second slips in a car that isn't optimized for the strip.

- Justin

[WayFast84]

I know, But I'm just estimating(the car has a real restrictive exhaust). The car pulls great, But the only other cars I have been in too compare it to are Rons 98 and Jakes 02, and I dont remember how they felt.

The car needs shocks, lca's and a panhard bar, it also needs a hood. I think I should do springs at the same time of shocks, No?

[BonzoHansen]

What ones did Josh tell you to get? I would not think bilsteins, kys or koni are good drag racing options.

If they are really bad, and you car sits at stock height w/stock springs and $$ is tight, parts store monroes or something will be a cheap improvement.

[WayFast84]

I started removing the rear shocks, I got both top bolts undone. Im waiting for some WD-40 to spray on the bottom bolts before I remove them. Im going with some NAPA rear shocks for the moment. UBG suggested I put any rear shock in, and get a good set of struts, Put the struts on once, and later down the road when I have more $$ I can change the rears by my self.

[BonzoHansen]

Sounds like a good (and familar sounding lol) plan. Also, WD40 <> good thread penetrant. PB Blaster or equivalent.

[WayFast84]

I got both shocks off, I didn't need WD40 just some extra leverage. It took me about 4 hours, but It took me an hour and a half just to get the wheels off, car jacked up right, and then another 10 min on the phone with UBG.

[ins0mnia24]

I had Koni Single Adjustables on all 4 corners of my car..
They worked great on the street but after running the car a few times.
I ended up trading them to a friend who decided he wanted Koni's for a set of QA1 Single Adjustable.
The QA1's with stock Springs feel better on straight lines and they handle just as good on the street as the Koni set I had..

[BonzoHansen]

I got both shocks off, I didn't need WD40 just some extra leverage. It took me about 4 hours, but It took me an hour and a half just to get the wheels off, car jacked up right, and then another 10 min on the phone with UBG.

Nice.

[Mike]

good job matt, next time will take 2 hours, and the time after that 1

[JSPERFORMANCE]

For the last time your springs are fine.

You need sub frame connectors too if you want to continue to be able to close your doors.

GR2's all around are cheap and work great. My IROC has them on all 4 corners and I don't really have a problem getting down the track.

[WayFast84]

All right, I'm sold on the GR-2's then. I'm ordering them from summit tomorrow at $22 a piece.

[NJ Torque]

What track are you going to? I'm in edison and takes me 20 minutes...

[Mike]

huh

[Tru2Chevy]

huh

Matt said in an earlier post in this thread that it will take an hour or more to get to any track. I believe he could get to E-town in less than 30 minutes from where his is though....

- Justin

[BTK79]

I used to live in Edison , it takes about 35 min with no traffic and being lucky with the lights.

[WayFast84]

I used to live in Edison , it takes about 35 min with no traffic and being lucky with the lights.

Theres no such thing as no traffic anymore. I had a job oppurtunity at ETOWN this week for the parking lot for pinks but I had to turn it down because I dont have my own ride yet, map quest said 40 min I believe i would ad 15 min of traffic and wrong turns because map quest is wrong all the time.

And another thing is that I wouldnt be racing at etown, I would rather race at island, and support a sponsor

[BTK79]

Theres no such thing as no traffic anymore. I had a job oppurtunity at ETOWN this week for the parking lot for pinks but I had to turn it down because I dont have my own ride yet, map quest said 40 min I believe i would ad 15 min of traffic and wrong turns because map quest is wrong all the time.

And another thing is that I wouldnt be racing at etown, I would rather race at island, and support a sponsor

You don't even drive yet , so what makes you the Waysmart on traffic ? Did you look that on map quest or just stay at a Holiday Inn ?

[//<86TA>\\]

You don't even drive yet , so what makes you the Waysmart on traffic ? Did you look that on map quest or just stay at a Holiday Inn Express last night?

fixed

:lol:

[WayFast84]

I just finished putting the shocks on. The hardest part of it all was putting my greg welds back on.. PAIN IN THE BUTT! I highly recommend anyone who is interested in GREG WELD wheels to shop around, My center caps are already rusting :shock:



You don't even drive yet , so what makes you the Waysmart on traffic ? Did you look that on map quest or just stay at a Holiday Inn ?

Have you been around here lately?

[Jersyboyy]

Good job matt if you need help on small stuff like this again hit me up man im right down the road. E-town is 25 no traffic for me so from mat 40 sounds right.

[Knipps]

I just finished putting the shocks on. The hardest part of it all was putting my greg welds back on.. PAIN IN THE BUTT! I highly recommend anyone who is interested in GREG WELD wheels to shop around, My center caps are already rusting :shock:

If the car's just sitting in the driveway why have the nice wheels on?

[WayFast84]

If the car's just sitting in the driveway why have the nice wheels on?

Only set of wheels it has... and its staying in the garage till friday, when it goes out for struts and inspection.

[WayFast84]

Good job matt if you need help on small stuff like this again hit me up man im right down the road. E-town is 25 no traffic for me so from mat 40 sounds right.

I might need help with the lower control arms and adjusting my headlight, I got my hood aligned and fitting over an air cleaner. but my head light hits the hood when flipped up. :-x

[IROCdan330]

this car was to be inspected?

[Jersyboyy]

WOW your sending out to get struts put on? Why not save the money do it yourself its not that hard actually! I swapped mine out myself in a few hours one night with basic tools.

[Mike]

maybe because he has finally learned not to try and tackle things that are over his head?

that said, im sure some people would come by and help

[WayFast84]

this car was to be inspected?

either that or i just need a sticker... :lol: