data connector....

[Iroc-z86]

ok, so my car was originally a 305 4bbl carb (lg4 i believe), I am in the process of converting it to tpi because i am sick of after market carbs but anyways. my question is do i have to change the data connector and wires in my car to one that was used in a tpi car?

if so, does anyone have one? :wink:

[HardcoreZ28]

As far as I know you'll need the entire harness out of a TPI car, which includes the ALDL port.

[Iroc-z86]

ok... i know i dont have the aldl connector in my harness that i got from the parts car and that car is long gone. I had to get all the tpi and wiring out in one night...

so does anyone have one?

[BonzoHansen]

You should go through your harness and see what else is missing.

[V]

aldl is part of the dash harness

ill explain which harnesses will work and which wont and all what you need... at a later time... i gotta go shoot my m249 now.

[Iroc-z86]

the tpi computer and engine harness is complete. I just dont have anything that would connect it to the dash except the one square white connecter.

i really hope this isnt going to be more of a pita than its worth....