Need to find Junk Yards with Camaro parts in NJ/PA/DE

[CrimsonNJ]

I need a passenger door, black perfered if possible. Power window. The Piece below the pass door (If that can be replaced) The support behind the bumper and the entire pass that has Camaro on it in the back.

My car is busted up and I'm trying to get it back on the road ASAP.

Any help with be greatful with names and locations of Junk yards

[Tru2Chevy]

http://maps.google.com/maps?f=q&hl=en&geocode=&q=trenton,+nj&sll=37.0625,-95.677068&sspn=61.928102,89.736328&ie=UTF8&ll=40.185115,-74.783206&spn=0.003713,0.005477&t=h&z=18

http://maps.google.com/maps?f=q&hl=en&geocode=&q=trenton,+nj&sll=37.0625,-95.677068&sspn=61.928102,89.736328&ie=UTF8&ll=40.180816,-74.787294&spn=0.003713,0.005477&t=h&z=18

Those two are right next to each other in Morrisville, PA.

- Justin

[GREZ28]

I know one in Berlin S.J on Cross keys rd near Rt73 called "U-pullit" and there is one more right next to it if anyone could enlighten me.:scratch:. The u-pullit one is cool u just walk in there with ur tools and take what u want by ur self.. Went there few yrs back when I was lookin 4 parts on an 85 Camaro I use to have.
Good luck..

[Rich2279]

Did you need parts for the '98 that is in your signature? I've been to most yards in SJ and I haven't come across many u-pull-it yards that have a Camaro or Firebird newer than '95 or '96. The yards wih the computerized inventory have them, but charge alot more.

[69BirdX]

I know one in Berlin S.J on Cross keys rd near Rt73 called "U-pullit" and there is one more right next to it if anyone could enlighten me.:scratch:. The u-pullit one is cool u just walk in there with ur tools and take what u want by ur self.. Went there few yrs back when I was lookin 4 parts on an 85 Camaro I use to have.
Good luck..

I belive your talking about albian. cost a buck to walk in and look.

[Rich2279]

yes, that is Albion u-pull-it.

[FBODS4EVER]

what about that guy on malaga rd in williamstown. the fbody shop. hes only there on sat.

[racerz]

Harry's u-pullit in new ringold pa. good prices.

[Rich2279]

Harry's u-pullit in new ringold pa. good prices.


I've had quite a few people tell me the same thing. I'll have to venture out there one day.

[miketa95]

there is a place called contemporary corvette/f-parts in Bristol PA, I just recently bought a TA door there. They are nice people they know their stuff and sold me a couple good parts.

[Tru2Chevy]

there is a place called contemporary corvette/f-parts in Bristol PA, I just recently bought a TA door there. They are nice people they know their stuff and sold me a couple good parts.

Good place for 4th gen / GTO / Impala SS / and any year vette stuff....

- Justin

[CrimsonNJ]

there is a place called contemporary corvette/f-parts in Bristol PA, I just recently bought a TA door there. They are nice people they know their stuff and sold me a couple good parts.

How much did it cost you for a door?

[CJDZ24_Z28]

contemporary Corvette. Been going there for years. www.contemporarycorvette.com

[miketa95]

How much did it cost you for a door?

$85 plus tax. I got a black one with a window that was already tinted 35%, and a working power window motor. I just picked it up and popped it on the car and it looks like it's been there all along.

[nj96z28]

Cont. vette is the shizz. Ive made that annoying drive a few times picking stuff up.

[CrimsonNJ]

what about that guy on malaga rd in williamstown. the fbody shop. hes only there on sat.

Can you provide an address or telephone number? I can't find any listing online or the yellow pages.

[Camarokid08731]

i went to a place off of exit 44 on the parkway i think the name was all american junk yard or something like that they have some rare cars there including a camaro third gen, a formula third gen and a second gen trans am...alot of other stuff too

[gonzo4886]

Got to BLACEYS U PICK AUTO PARTS 609-758-1919
242 Monmouth Rd
Wrightstown, New Jersey 08562
They always have f bodies and their prices are reasonable

[lrdvadr]

Contemporary Corvette in Bristol, PA. Very nice people who know their stuff. Excellent selection of F-body, B-body, and Corvette parts.

[bad64chevelle]

Got to BLACEYS U PICK AUTO PARTS 609-758-1919
242 Monmouth Rd
Wrightstown, New Jersey 08562
They always have f bodies and their prices are reasonable

That is right around the corner from me. They are okay when you catch them after they had their morning 30 pack.

[79CamaroDiva]

If you wanna try farther north, captains auto in Bangor, pa has a big inventory. Look them up and call to see if they have anything before driving up if you want.

[CrimsonNJ]

there is a place called contemporary corvette/f-parts in Bristol PA, I just recently bought a TA door there. They are nice people they know their stuff and sold me a couple good parts.

I just went to Contermporary corvette in Bristal, PA.
I picked up a new door, side mirror, rear fasica (with chrome inlays) rear bumper and bumper absorber for. All items were in good in condition, no scratches, so no paint needed. All were in black.

I paid 300 cash for everything. A little more than a u pull it but I was in and out in less than 15 minutes.

There number is 800-367-8388

[Z28Justin]

what about that guy on malaga rd in williamstown. the fbody shop. hes only there on sat.

??? i live on malaga where is this place, the only shop i can think of is gamberdella.

[Z28Justin]

shortys on the pike has lots of 4th gens last time i went

[Rich2279]

Shorty's cars are stripped down. Maybe there is a yard south in Millville or Vineland. I asked my buddy who is in Bridgeton/Deerfield and he said there is nothing down his ways.

[NJSPEEDER]

That is right around the corner from me. They are okay when you catch them after they had their morning 30 pack.

Sounds like a fun place to shop.

[bobb1589]

i have been tehre a couple times... actually met the owner at new egypt raceway one day and he invited us to come check it out...he is a nice guy but all the other guys can be dicks

they usually have a few 3rd and a few 4th gens

[Rich2279]

I'm in South Jersey. Would you say that it is worth the drive?

Got to BLACEYS U PICK AUTO PARTS 609-758-1919
242 Monmouth Rd
Wrightstown, New Jersey 08562
They always have f bodies and their prices are reasonable

[chemicalstylez]

there is a place called contemporary corvette/f-parts in Bristol PA, I just recently bought a TA door there. They are nice people they know their stuff and sold me a couple good parts.

^---- what he said.

[bad64chevelle]

I'm in South Jersey. Would you say that it is worth the drive?

For Fbody stuff? I doubt it. I rarely see any Fbody stuff around there.

[Mark B]

+1 for contemporay corvette

Abion U-Pull it sucks. I havent seen a 3rd or 4th gen camaro in there for over a year. They used to have lots of them. The place next door is abion auto parts. I think its owned by the same person. There prices are kind of high, so I dont go there. But they have nicer, newer cars & pull the parts for you. I have a suspision that when they get fresh cars in, they put them in the auto parts side, pick the good stuff off, and then move them over to the u-pull-it side. But its just a hunch.

[Rich2279]

+1 for contemporay corvette

Abion U-Pull it sucks. I havent seen a 3rd or 4th gen camaro in there for over a year. They used to have lots of them. The place next door is abion auto parts. I think its owned by the same person. There prices are kind of high, so I dont go there. But they have nicer, newer cars & pull the parts for you. I have a suspision that when they get fresh cars in, they put them in the auto parts side, pick the good stuff off, and then move them over to the u-pull-it side. But its just a hunch.


Albion does indeed suck. Last time I went they had one 3rd gen Camaro and one 3rd gen Firebird. Neither one had good parts on them.

[my82roc]

Went to blaceys yesterday.Been there a few times before.Tom the owner is a pretty cool guy.I talked to him for awhile and he was showing me pics of his nova race car.They had 2 3rd gens(91/92 RS & 85 T/A) and a few 4th gens.

[my82roc]

Albion does indeed suck. Last time I went they had one 3rd gen Camaro and one 3rd gen Firebird. Neither one had good parts on them.
Ive been going to albion for years.I got in good with the guy who used to work there about 4 years ago(greg) and he would hook me up with great deals.I got alot of good stuff from there in the past including a 9 bolt 3.27 pbr disc rear from an 89 5.7 GTA for 100 bucks.Im pretty friendly with the girl (long black hair)who works there now and she hooks me up too but they havent had anything for quite some time

[Rich2279]

A few years ago Albion did have a great selection. I may try some of the places in Pa. I was told of Harry's and have been meaning to get out there since last year.