LS1/LT1 parts F/S

[BarneyMobile]

I have quite a few parts for sale (near Cherry Hill Mall) from my former 95' Z28 and my 00' SS. Local pick up, PM me for pics and shipping if need be. I accept Paypal aswell. Thanks for looking!

*Stock 10bolt 4 channel rear w/ Motive 3.90's-------------SOLD
(w/out backing plates)

*GM 3.42 gears------------------------------------------$150

*GM 3.23 gears------------------------------------------$100

*Zexel Torsen Limited slip diff.----------------------------$100

*Spare stock 10bolt axle w/ reluctor ring------------------$50

*UMI LCA relocation brackets (bolt-on)--------------------$65

*Complete LT1 F-body front brakes w/ spindles------------$75

*Stock LT1 95' short block 2bolt mains (needs machining)----$175

*LT1 B-body style head gaskets (.029 thickness)----------Sold

*Stock untuned PCM for a 95' LT1 F-body A4--------------$100

*Stock LS1 intake manifold w/ egr plug--------------------$100

*Stock LS1 exhaust mainfolds w/ egr block off--------------$50

*Stock LS1 00'+ Y-pipe-----------------------------------$50

*Stock LS1 air lid-----------------------------------------$35

*BBK 80mm Throttle Body 98' style----------------------- SOLD

*MTI Stealth II LS1 cam (224/220 .581/.581 116lsa)--------$200

*Stock LS1 00' cam---------------------------------------$50

*Stock 26lb LS1 injectors----------------------------------Sold

*Stock LS1 fuel rails---------------------------------------Sold

*Stock LS1 #853 casting heads w/ stock LS1 valve spings--$150

*PAC 1218 LS1 Valve spring, same as the Comp 918's-------$75

*Pioneer Head unit with GM harnness-----------------------$100

[NJ346]

Hmmm....I may be interested in the rear even though I already have a spare 10 bolt sitting in my garage. I was thinking about doing 3:90s to my car in the future and this is just all the more reason to buy your rear. What exactly do you mean by no backing plates? (probably gonna feel pretty stupid when you tell me haha) Miles on the rear? Inerested in my 2:73 4 channel rear thats sitting in my garage plus $100 cash? LMK

[NJ346]

Look at that, Mike and Tim to the rescue...responded back in less than 2 minutes...haha. Anyway, OP if you can send me pics of the rear that'd be great. I now need to sell the other rear or trade it asap, I don't think the parents are gonna be happy with an even larger pile of parts sitting in the garage.

[BarneyMobile]

Look at that, Mike and Tim to the rescue...responded back in less than 2 minutes...haha. Anyway, OP if you can send me pics of the rear that'd be great. I now need to sell the other rear or trade it asap, I don't think the parents are gonna be happy with an even larger pile of parts sitting in the garage.

I'll nab some pics in the morning for ya!:nod:

[ZeroCool8891]

the Stock 26lb LS1 injectors will they work on a 3rd gen tpi setup.

[maroman88]

PM sent

[BarneyMobile]

the Stock 26lb LS1 injectors will they work on a 3rd gen tpi setup.

To my understanding, there's some modification needed to your fuel rails to make LS1 injectors work with a TPI setup.

[ZeroCool8891]

ok thanks

[LTb1ow]

Is that shortblock everything? Pistons/rods/crank?

[BarneyMobile]

Is that shortblock everything? Pistons/rods/crank?

Yes it is! No heads or intake just the block, crank ,rods, pistons, and stock cam & lifters. The timing cover isn't on the motor but I have one for it (95' timing cover).

[NJ Torque]

How many miles on the springs? Also, pics of the TB?

[BarneyMobile]

How many miles on the springs? Also, pics of the TB?

The PAC 1218's valve springs only have 3k miles, I ran those spings with my old MTI cam then swapped to a larger H/C setup.

[LTb1ow]

Well would you go any lower on just the block? I don't need any of the stock rotating assembly.

[maroman88]

waiting for a return PM.......

[jin1481]

do you still have the front brakes

[BarneyMobile]

do you still have the front brakes
Yes, its still up for grabs!

[BarneyMobile]

Bump.....

[BarneyMobile]

Bump......

[Featherburner]

*LT1 B-body style head gaskets (.029 thickness)----------$25
Rob, what brand are the gaskets?

[BarneyMobile]

Rob, what brand are the gaskets?
They're GM gaskets:nod:

[Featherburner]

They're GM gaskets:nod:
Rob, you're going to the January meet at the Firkin, Right? Bring them with you and I'll pay you for them there. Sound good?

[BarneyMobile]

Rob, you're going to the January meet at the Firkin, Right? Bring them with you and I'll pay you for them there. Sound good?
Yes Sir I'll be at the meet. They're all yours.