View Full Version : need quick help - NHRA rule
GP99GT
02-08-2009, 10:59 AM
when is a driveshaft loop required? im placing an order with summit in a few mins and need to know if i should buy one or not
GP99GT
02-08-2009, 11:22 AM
f you guys i bought one anyway
NJSPEEDER
02-08-2009, 01:46 PM
Driveshaft loop and long wheel studs are required on any car running slicks. A lot of tracks have been expanding the term "slicks" to include cheater slicks and drag radials
GP99GT
02-08-2009, 02:51 PM
its also required on a car running under 11.49 i believe...dunno if ill actually go that quick but its nice to have anyway. any idea what the rule is for wheel studs? i knew i was forgetting something
Tru2Chevy
02-08-2009, 04:28 PM
I don't know the exact wording, but basically the studs need to stick out of the end of the lugnut at least as far as the width of the stud. So for example, if your wheel studs are 1/2" thick, then they need to stick out of the end of the lugnut by 1/2".
- Justin
79CamaroDiva
02-08-2009, 05:15 PM
DS Loops are required on ALL cars running 13.99/quicker on slicks OR
11.49 and quicker on DOT tires.
and if you really needed to know right away, you could have text me
GP99GT
02-08-2009, 05:32 PM
yeah i didnt think about that melissa. :lol: you think im smart or something?
i just googled it and took the first answer i saw....its a good thing to have either way anyway
sure is..........saved my floor and probably feet
79CamaroDiva
02-08-2009, 06:11 PM
Ya. Esp the way you shift :-)
GP99GT
02-08-2009, 06:22 PM
im good with my stick what can i say?
WildBillyT
02-09-2009, 08:01 AM
Cheap insurance. It's not like a loop is a couple hundred dollars.
1984camaroz28
02-14-2009, 08:33 PM
I don't know the exact wording, but basically the studs need to stick out of the end of the lugnut at least as far as the width of the stud. So for example, if your wheel studs are 1/2" thick, then they need to stick out of the end of the lugnut by 1/2".
- Justin
Wrong... Per NHRA rule they only need to come out past the washer on the shank of the lug nut
Tru2Chevy
02-15-2009, 03:27 PM
Yea, not sure what I was thinking when I wrote that. A 1/2" stud needs to stick into the hex portion of the lugnut at least 1/2", not out of the end of the lugnut.
- Justin
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.