Iroc Thermostat

[19iroc88]

i went to change the thermostat in my iroc and i cant get at the front bolt on the housing. would love some feedback

[The Fixer]

IIRC, you'll need to move the throttlebody. Disconnect the throttle/TV cables, cruise if it's there, and don't lose the clips! Then remove the 4 bolts holding the TB in place, and you should be able to move it out of the way. Otherwise, maybe you can swing a ratcheting box wrench in there under the throttlebody. Good luck!

[ZeroCool8891]

IIRC, you'll need to move the throttlebody. Disconnect the throttle/TV cables, cruise if it's there, and don't lose the clips! Then remove the 4 bolts holding the TB in place, and you should be able to move it out of the way. Otherwise, maybe you can swing a ratcheting box wrench in there under the throttlebody. Good luck!


you can but its a pain, its so much easyer to remove the TB, takes like 5 mins and you can clean up the TB wile your there. but anyway good luck.

[Teds89IROC]

easiest is to remove the TB

[maroman88]

wat they sed

[FlyingDutchman]

i hear if you swap to an lt1 you make more power...

[deadtrend1]

i hear if you swap to an lt1 you make more power...

umm, are you like making a joke or ???

just to keep it clear, LT1 thermostats don't fit TPI's

[FlyingDutchman]

umm, are you like making a joke or ???

just to keep it clear, LT1 thermostats don't fit TPI's


i meant the whole lt1 swap b/c he was thinkin of buyin one