NJ Torque
03-28-2009, 05:15 PM
Everything is located in Edison NJ... Can be picked up, or can meet relitivly close, or Work in Somerset
Ported LS1 Aluminum weiand intake, TB opening/ports have been cleaned/ported. Currently painted red $250
Set of Camaro "export" taillights $225
Set of 4 painted Z28 16x8 "Snowflake" wheels with new 245/50/16 Kumhos... Minor curb damage, nothing major. $350
Pair of 17x9 Gray painted ZR1 wheels, one wheel has slight scuffing, tires are since gone. $125
93-97 TA headlight housings that accept H4 style bulbs. $25
Have Two (2) Stock LS1 airboxes/lids $5 each
Full set of "saddle" tan G body front bucket seats and rear bench, no cuts, but is dirty $100 for all
Summit Hi-Flow SBC water pump "long" style, just bolted on a motor, never ran $20
GMPP Flat tappet 212/224 cam with matching lifters, had it in my 350, made good power, took out for something larger - $60
Chrome regal front bumper 83-87 w/marker lights $20
Set of weld prostars for 4th gen 15x3.5 with open mcgard lugs and spacers, newer radial tires $350
UMI tubular LCA's for a 4th gen(possible other fitment?) Red, NIB $80
UMI Tubular Panhard bar for 4th gen(possible other fitment?) Red, NIB $70
Autometer "C2" series 2 1/16 mech. water temp and oil pressure guages installed with lights only... never 'hooked' up $100 for the set
Clear 4th gen rear sidemarkers $35
Stock 98 Camaro 28# injectors set of 8 $30
Stock 98 Camaro cam $30
90 MM bluemaxx TB with hardware no sensors $340
Borla adjustable catback for 98+ with quad tips. Cut over the zxle and tips cut... $350
6LE C5 front brake conversion for 98+... new d/s rotors, brackets and pads $525
Thanks...
Ported LS1 Aluminum weiand intake, TB opening/ports have been cleaned/ported. Currently painted red $250
Set of Camaro "export" taillights $225
Set of 4 painted Z28 16x8 "Snowflake" wheels with new 245/50/16 Kumhos... Minor curb damage, nothing major. $350
Pair of 17x9 Gray painted ZR1 wheels, one wheel has slight scuffing, tires are since gone. $125
93-97 TA headlight housings that accept H4 style bulbs. $25
Have Two (2) Stock LS1 airboxes/lids $5 each
Full set of "saddle" tan G body front bucket seats and rear bench, no cuts, but is dirty $100 for all
Summit Hi-Flow SBC water pump "long" style, just bolted on a motor, never ran $20
GMPP Flat tappet 212/224 cam with matching lifters, had it in my 350, made good power, took out for something larger - $60
Chrome regal front bumper 83-87 w/marker lights $20
Set of weld prostars for 4th gen 15x3.5 with open mcgard lugs and spacers, newer radial tires $350
UMI tubular LCA's for a 4th gen(possible other fitment?) Red, NIB $80
UMI Tubular Panhard bar for 4th gen(possible other fitment?) Red, NIB $70
Autometer "C2" series 2 1/16 mech. water temp and oil pressure guages installed with lights only... never 'hooked' up $100 for the set
Clear 4th gen rear sidemarkers $35
Stock 98 Camaro 28# injectors set of 8 $30
Stock 98 Camaro cam $30
90 MM bluemaxx TB with hardware no sensors $340
Borla adjustable catback for 98+ with quad tips. Cut over the zxle and tips cut... $350
6LE C5 front brake conversion for 98+... new d/s rotors, brackets and pads $525
Thanks...