Auto to Manual

[SupermanX24]

http://cgi.ebay.com/ebaymotors/Trans-Am-Camaro-Borg-Warner-LT1-T56-6spd-Transmission_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1171 Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a 1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQ hashZitem380114053609QQitemZ380114053609QQptZMotor sQ5fCarQ5fTruckQ5fPartsQ5fAccessories

So I found this setup on ebay. What else would I need to do the swap over?

[deadtrend1]

hard to tell from the picture, but I don't see the master cylinder. Its small so I may just not be seeing it.

Need to modify the harness with new pigtails(backup lights, CAGS, dunno if the speedo is different), edit the pcm so it doesn't think that it needs to shift.

New clutch, resurhace or replace the flywheel. Couple quarts of ATF and brake fluid. And make sure the inspection cover is included.

Some sawzall blades or cutoff wheels for a grinder. Center console, lower boot. Im sure theres something else

[NJSPEEDER]

It is from fparts, aka Contemporary Corvette, so there is a pretty good chance that all of the stock parts you need are included. Give them a call and ask, they are great guys, I have dealt with them several times before.

[procamaroz28]

f parts is clutch with f body parts i trust them but i think u need a computer too.. i didnt see that in the pic...

[sweetbmxrider]

i would call them and write down what is included. ls1tech has write-ups on the conversion and list all the parts needed. just check them off.