Log in

View Full Version : Update on taping noise!

MonmouthCtyAntz
04-12-2009, 02:41 PM
Well my gf's friend tore into the car and the rockers and lifters look straight. Then we got into the discussion of oil...funny but the sound started a few days after i did the pennzoil plat. change. Hes a amsoil dealer so were gonna do an oil change w/ that along w/ a amsoil filter and see whats what...He said that the major oil dealers sometimes thin the oil out too much for the synthetics and that might be the reason its happening. If this fixes the problem Ill swear by amsoil forever :lol:...wish me luck.
MonmouthCtyAntz
04-12-2009, 04:22 PM
For almost 11 dollars a quart this amsoil race oil better fix it :|
sweetbmxrider
04-12-2009, 05:55 PM
what weight oil were you using and what are you going to be putting in it? is it only tapping when cold?
LTb1ow
04-12-2009, 06:03 PM
Did you dissemble the lifters?

Or did you just eyeball them?
98tadriver
04-12-2009, 06:16 PM
if the tap goes away after a while and comes back, it could be a lifter. if its constant and doesnt go away, it could be a bent pushrod
NJ Torque
04-12-2009, 06:36 PM
Did you dissemble the lifters?

Or did you just eyeball them?


You need to pull the heads to get the lifters off of an ls1
LTb1ow
04-12-2009, 07:29 PM
You need to pull the heads to get the lifters off of an ls1

Yes, thank you, but I knew that.
MonmouthCtyAntz
04-12-2009, 08:09 PM
Cant remember the exact weight we changed it with...damn beer :-x He eyeball'd them , but the kid is good....and it starts when the car is warm and it eventually goes away after awhile...I honestly havent had much seat time in it. Just my play car .. well see what happens...torque I have a 100 beans towards your intake :nod:
KirkEvil
04-12-2009, 09:57 PM
you cannot eyeball a bad lifter unless it catastrophically failed. I had a lifter go bad 3 weeks ago, and after pulling them all they look perfect. I could not even compress the bad lifter by hand.

What weight oil did you have in before the change?
MonmouthCtyAntz
04-13-2009, 06:56 AM
you cannot eyeball a bad lifter unless it catastrophically failed. I had a lifter go bad 3 weeks ago, and after pulling them all they look perfect. I could not even compress the bad lifter by hand.

What weight oil did you have in before the change?

Cant remember the exact weight. The kids a good mechanic I wasnt there but I doubt he just looked at them and say "aaa ok" lol. I spoke to the previous owner of the car and the engine was reassembled not that long ago w/ new parts by him...Doubtful that the parts are starting to fail already.
NastyEllEssWon
04-18-2009, 03:57 AM
how the hell did you eyeball the lifters in an ls1?