Talk to me about nitrous.

[NJ Torque]

Looking at kits...

What do I need? Obv, I'll need a blowdown tube at the track and wear my firejacket

http://www.dynotunenitrous.com/store/scripts/prodView.asp?idproduct=115

http://www.nitrousoutlet.com/catalog/products.asp?group=14&model=37&dept=11

http://www.harrisspeedworks.com/shop/home.php?cat=136

I'm guessing I want a wet kit?

Micro switch goes on the floor board? What else do I need??

Thanks.

[WildBillyT]

A safe way to do it is:

1.) Fuel pressure safety switch
2.) Arming switch
3.) WOT switch
4.) Window switch

The key is to always be in control of when your car is spraying and never allow it to go lean.

[Mike]

on the ls1 the microswitch can go on the throtlebody actually its any cable driven gm....heres the link

http://jimmy-jams.tripod.com/activationswitch.htm


and everything else billy said

[LTb1ow]

You could also get a window switch that incorporates WOT into it. Also, depending on the size shot, you may want to pull a few degrees of timing, espcially if the car is tuned NA. Also, step colder plugs.

[NJ Torque]

on the ls1 the microswitch can go on the throtlebody actually its any cable driven gm....heres the link

http://jimmy-jams.tripod.com/activationswitch.htm


and everything else billy said

that looks pretty trick.. gotta see if it'll work on my 90 mm.. since the site says stock ls1

[Mike]

it fit on my performance products 85 when i had it

[LTb1ow]

Bottle warmer, guages for fuel pressure, tank pressure, purge.