ABS light

[JerzLT1]

Looking to shut the ABS light off in a car that doesnt have ABS anymore just because i dont want the light on. i know someone posted a link somewhere that you can ground a wire to shut it off. just looking for that diagram

[NastyEllEssWon]

heh id like to know this too.....

[Formulalt1]

To disable the ABS Light:
Locate the ebtcm under the drivers side kick panel. This box can be removed if you want. You must ground the warning lamp wire that is in the harness that plugs into the ebtcm. Its a light green wire located on the b2 connector. To ensure you are looking at the correct connector, next to the b2 connector position b1 will be dark green, b3 will be pink, a1 and a2 will not have anything connected to it. Just splice into it or cut it and ground it from the dash side of the wire.

http://shbox.com/1/ABS_schematic.jpg

[JerzLT1]

ty :)

[Formulalt1]

No problem.

[69BirdX]

Thanks i need to do this now

[MonmouthCtyAntz]

Good ol shoebox!...ashame cz28.com stinks nowadays lol

[Formulalt1]

Good ol shoebox!...ashame cz28.com stinks nowadays lol
Diagram is shoebox but the write up is compliments of your favorite site :mrgreen:.