350 powa!!

[HeadlessNorseman]

This thread will get longer as i get parts and machine work done to the motor...but they are here and safe for now. 2 4 bolt long blocks one complete with carb distributor and pan. Crappy head castings! One is going to get built up and the other either sold or something...dunno yet

http://i42.photobucket.com/albums/e314/isphius/sportcoupe/Picture018.jpg
http://i42.photobucket.com/albums/e314/isphius/sportcoupe/Picture019.jpg

[Formulalt1]

Can't wait to see the finished product. Good luck.

[chrisfrom nj]

good luck

[HeadlessNorseman]

Little update. Got the heads, oil pan and pump off. Not that big a deal. Doesnt appear to have any signs of ring damage, spun bearings or anything bad. I can spin the damper over by hand too. Bores are very rusty and will def need a full .030 over bore

http://i42.photobucket.com/albums/e314/isphius/sportcoupe/Picture027.jpg

http://i42.photobucket.com/albums/e314/isphius/sportcoupe/Picture028.jpg

http://i42.photobucket.com/albums/e314/isphius/sportcoupe/Picture029.jpg

http://i42.photobucket.com/albums/e314/isphius/sportcoupe/Picture031.jpg

Crappy head castings. Still 1.94/1.50 valves tho. The casting number is 14102183. Cant find much info on them other than they came on a 350 truck motor.

http://i42.photobucket.com/albums/e314/isphius/sportcoupe/Picture030.jpg

Bucket of valvetrain parts

http://i42.photobucket.com/albums/e314/isphius/sportcoupe/Picture032.jpg