weights on rear discs?

[3.4 grape of wrath]

I have a 94 camaro with disc brakes in the rear and was wondering what are those weights for on the rear discs? And are they needed? On my drivers side the weight is rubbing the lca the passenger side is ok plenty of clearance.

[//<86TA>\\]

how is a weight on the disc going to touch the LCA?

[sweetbmxrider]

do you mean on the caliper bracket?

[3.4 grape of wrath]

I'll try again. There is a round weight that is mounted to a bracket that has to do something with the rear disc brakes. I have after market lower control arms and the round weight is rubbing the lca. I was wondering what they are for I'm guessing some kind of noise or vibration dampening and can they be removed?

[NastyEllEssWon]

take a pic???? bump stop???

[camaro2you]

Its part of the e-brake setup i believe.

[Featherburner]

take a pic???? bump stop???http://i164.photobucket.com/albums/u3/jdhawk93/S60007.jpg I had to cut mine to clear the welded on relocation brackets. I think it's for NVH.

[3.4 grape of wrath]

That's the baby! Thanks for the pic. And by the way that is one clean car you got there.

[sab123]

I had to cut mine to clear the welded on relocation brackets. I think it's for NVH.

Looks like you don't have the parking brake any more? Don't see the cable coming in. Or am I just missing it?

On '93-'97 (?) Camaros the parking brake works by using the same disc brake pads. The pads can be pressed to the rotor by either the hydraulic cylinder or a cam connected to the cable. These "bumps" are where the cam is mounted.

[Mike]

http://i164.photobucket.com/albums/u3/jdhawk93/S60007.jpg I had to cut mine to clear the welded on relocation brackets. I think it's for NVH.

nice brake lines

[Featherburner]

nice brake linesYeah, they're ok.:lol:

Looks like you don't have the parking brake any more? Don't see the cable coming in. Or am I just missing it?No you're not missing it. In this picture the rear was not installed in the car yet.