New Stance!

[MonmouthCtyAntz]

Havent got a chance to clean it yet, but finally the cars done.
http://i113.photobucket.com/albums/n226/Antz97znj/NewImage2-2.jpghttp://i113.photobucket.com/albums/n226/Antz97znj/NewImage1-1-1.jpghttp://i113.photobucket.com/albums/n226/Antz97znj/newimage3-1-1.jpg

[thunder]

lookin good man. i likw the green with the black rims

[JerzLT1]

what did you change?

[emolineaux]

looks better man. how you like those springs?

[MonmouthCtyAntz]

looks better man. how you like those springs?

They were garbage actually lol...I only used the front ones, the rear drop was to low w/ them on. So I just pulled the bump stop out for the rear and put the stockers on.

[sweetbmxrider]

it looks raked to hell. maybe it will settle more.

[69BirdX]

looks prety good. maybe ill lower mine.......not that means a worse 60 foot

[Jersey_TA]

Looks good man

[transmaro93]

i say put the rear springs in to level it out alittle bit... but its your car... its really raked to not have fatties in the back...

[thunder]

i like the rake tho

[MonmouthCtyAntz]

i like the rake tho

Yea not sure I dont see it, maybe I was on some uneven ground. Stance looks fine to me..On the other side of the coin I hate the look of a really low rear.

[xrelapse13]

looks good. what kind of springs did you go with?

[MonmouthCtyAntz]

looks good. what kind of springs did you go with?

http://www.ag.com.ar/ingles/index.html

I only used the fronts, pulled the bump stops out for the rear...didnt like how low it was w/ the springs.

[LTb1ow]

Looks kinda raked to me.

[transmaro93]

you dont notice the rake in person probably becaue your running 17s up front so it keeps the wheel well space equal... but makes the ride hight worse from front to back.... but its your car... do as you please!

[MonmouthCtyAntz]

lol....

[creeper]

I only used the fronts, pulled the bump stops out for the rear...didnt like how low it was w/ the springs.

the spring isolators? or the bump stops?

[LTb1ow]

!bump stops lowers your car, der.

Friggen newbs.

[sweetbmxrider]

you dont notice the rake in person probably becaue your running 17s up front so it keeps the wheel well space equal... but makes the ride hight worse from front to back.... but its your car... do as you please!

you obviously don't know what you are talking about. he pulled out the bump stops to get the car to sit lower. i mean that makes sense :-? oh, and your monitor is tilted, best fix that!

[LTb1ow]

Maybe he just doesn't have anything hidden in his Jam rear seat mod?

[sweetbmxrider]

maybe the car is always bowing to its ls1 greatness? that or the billet grille?

[LTb1ow]

Either way, his tips are a tad bit crooked.

[sweetbmxrider]

too much gen III torque. nah it could be a rear spring not fully seated. i'd double check it.

[transmaro93]

wow.... judges..... yes this thread is ruined.... thanks adam and matt...

[creeper]

!bump stops lowers your car, der.

Friggen newbs.

you obviously don't know what you are talking about. he pulled out the bump stops to get the car to sit lower. i mean that makes sense :-? oh, and your monitor is tilted, best fix that!

i was just clarifying what i figured was a typo. unless what he actually meant was that he removed the bump stops to reduce weight in the rear in turn RAISING the back end for more rake.

this thread is just dripping with sarcasm.

to the OP, looks a lot better lowered!

[LTb1ow]

i was just clarifying what i figured was a typo. unless what he actually meant was that he removed the bump stops to reduce weight in the rear in turn RAISING the back end for more rake.

this thread is just dripping with sarcasm.

to the OP, looks a lot better lowered!

Gee, you think?

[creeper]

no, not at all!

[S.J.SLEEPER]

you obviously don't know what you are talking about. he pulled out the bump stops to get the car to sit lower. i mean that makes sense :-? oh, and your monitor is tilted, best fix that!

hey i'm a newbie , but how the f**k are bumpstops gonna lower the car? there in place to prevent rear axle/tire damage from compression on large bumps or launches.
OR ARE YOU GUYS JUST FK'N WITH THAT DUDE?

[creeper]

removing them won't lower the car. the OP stated that he removed the rear bump stops, which i believe was an accident and that what he meant to say was that he removed the rear spring isolators. in an attempt to clarify this i inadvertently sparked a sarcasm spree that seems to have not yet reached an end.

[S.J.SLEEPER]

all you guys are a riot. i used to be a gm tech and i figured you guys were just being sarcastic, just wanted to make sure somebody actually didn't think they will lower the car.
removing the isolators will cause noise springtobody
better off callin eibach and have them send you a rear set of springs that are 3/4" orbetter lower to staighten him out.

i am gonna post up a thread on my new BOOSTED LQ9 creation so check it out.

[Jam]

is that a 2" or 2.5" catback? looks tiny

[MonmouthCtyAntz]

lol, yes we removed the isolaters :nod:...I was on the phone w/ nasty and we were talking about it right before. He mentioned bumpstops and it stuck in my head.

[NastyEllEssWon]

lol, yes we removed the isolaters :nod:...I was on the phone w/ nasty and we were talking about it right before. He mentioned bumpstops and it stuck in my head.




haha yeah i remember that convo on the phone....i think what you meant was....when the cars rolling backwards....bumping is not the way to stop rofl...hahah....chew gum and walk...bet you cant

[MonmouthCtyAntz]

haha yeah i remember that convo on the phone....i think what you meant was....when the cars rolling backwards....bumping is not the way to stop rofl...hahah....chew gum and walk...bet you cant

huh?...ok...:?:

[creeper]

removing the isolators will cause noise springtobody


not if you wrap the top coil with a piece of heater hose. known as the "heater hose" mod.

lol, yes we removed the isolaters :nod:...I was on the phone w/ nasty and we were talking about it right before. He mentioned bumpstops and it stuck in my head.

ooo gotcha haha

[MonmouthCtyAntz]

not if you wrap the top coil with a piece of heater hose. known as the "heater hose" mod.




Yes thats what we did :nod:

[sweetbmxrider]

hey i'm a newbie , but how the f**k are bumpstops gonna lower the car? there in place to prevent rear axle/tire damage from compression on large bumps or launches.
OR ARE YOU GUYS JUST FK'N WITH THAT DUDE?

yeah the later of the two :rofl:

[MonmouthCtyAntz]

yeah the later of the two :rofl:
There the last 2 toolboxes on this site that would **** with me...One doesnt even have a license and the other runs a 14 in a heads/cam LT1 :mrgreen:

[LTb1ow]

My car is stock. Everyone ****s with you.

[transmaro93]

but both of their cars sit level....

[LTb1ow]

but both of their cars sit level....

burrrrrrnnnnnnn

[NastyEllEssWon]

huh?...ok...:?:





haha i meant why your bumper is a little off right now :lol:

[LTb1ow]

How could you tell with all that rake?

[BigAls87Z28]

http://www.dnr.state.wi.us/org/caer/cea/publications/clipart/gifs/rake2.gif

yeaaahhhh

[LTb1ow]

What kind of ******* makes fun of the guy?

geez man, you are not nice.

[sweetbmxrider]

There the last 2 toolboxes on this site that would **** with me...One doesnt even have a license and the other runs a 14 in a heads/cam LT1 :mrgreen:

i have a license :-?

[transmaro93]

What kind of ******* makes fun of the guy?

geez man, you are not nice.

you kidden me with this screen name right now hahaha you really have nothing better to do!!!

[LTb1ow]

Huh?

[transmaro93]

^^^ hahah i have to hear the story behind this one.. just send me a pm with it...

[5.7TA]

It looks better now that it's dropped man...:nod: