replacing engine

[maroman88]

well the old 305 in the 88 camaro that was TBI, then TPI and is now carb'd is just freakin pathetic lol... i have minimal cash to spend since im saving for another toy, however i like to drive the 3rd gen, but its truely embarasing. the valve seals are SHOT, making huge clouds of smoke in the parking lot at work isnt so fun! the timing chain is clanking away and its got a great tickticktick on exceleration, not to mention its slow as balls and has a WELL BEATEN 90k miles on it! i dont need anything killer, just for cruising around with...

i checked ebay quick while at work for cheap crate engines and came across this company from arizona that sells rebuilt, slightly performance oriented engines for what i think is a decent price, esp compared to say jasper garbage...

http://cgi.ebay.com/ebaymotors/CHEVY-350-328-HP-MIDNIGHT-BLACK-CRATE-ENGINE-1anc_W0QQitemZ140341625464QQcmdZViewItemQQptZMotor s_Car_Truck_Parts_Accessories?hash=item20ad034278&_trksid=p4506.c0.m245

u think thatd swap into my 88 directly? and wata u think a shop would charge to do the install?

[unstable bob gable]

Before I'd go shipping my hard earned buck-a-roos waaaaaaay across the country for ?????? in a crate, I'd hit up our sponsors for a quote on a build/install/tune. I'd personally deal with Josh @ JS Performance. Even though he's a funny looking Hillbilly with crappy taste in beer, he does top notch work and will work with you and yer wallet. Plus he does it all from the build to the install to the varoom, varoom...down the road you go with a big smile on yer puss.

[Stevoone]

If you decide to build something let me know. I have a lot of sbc parts left over from a recent build. I'll also be pulling the heads off of my car hopefully soon if your interested in those. They have about 10k miles on them since i got the engine from jasper.

I can get a list of stuff together if your interested.

[Blacdout96]

+2 for JS Performance, he does good work, and actually cares abotu what the customer wants, no how much he gets to lines his pockets with :)

[maroman88]

yeayeayea as much as id like to have an engine built, thats just not guna happen at this point, some day it will get LSx'd, but for now i just need it to drive

found this lil guy, best ive seen so far

http://www.rebuiltcrateengines.com/chevy-350-street-heat-p-2101.html

[BonzoHansen]

yeayeayea as much as id like to have an engine built, thats just not guna happen at this point, some day it will get LSx'd, but for now i just need it to drive

found this lil guy, best ive seen so far

http://www.rebuiltcrateengines.com/chevy-350-street-heat-p-2101.html

Check GM. You can get new for near that price. Add some good heads & a cam when you get cash and you're good.

http://www.summitracing.com/parts/NAL-12568758/
http://www.summitracing.com/parts/NAL-12499529/
http://www.summitracing.com/parts/NAL-12520270/

[maroman88]

Check GM. You can get new for near that price. Add some good heads & a cam when you get cash and you're good.

http://www.summitracing.com/parts/NAL-12568758/
http://www.summitracing.com/parts/NAL-12499529/
http://www.summitracing.com/parts/NAL-12520270/

i was looking at the 1st and 3rd ones u posted, since they are also TBI/centerbolt engines. wats the stock power on those and wats the differance between those 2? i believe the 3rd one was in the heavy duty trucks? more torque? and what do i need if i get a 4-bolt vs 2-bolt, mines a 2-bolt now

[Neocow]

Dont know what your looking for but i have a 350 i just rebuilt bore .30 over have 400 heads crown heads on it mild cam and bout 1000 miles on the motor. its an old 80s 4 bolt main truck motor.

Its all there water pump alternator and carb (holley 650 double pumper) Ill part with for 1400

http://c4.ac-images.myspacecdn.com/images02/81/l_79be3f71d11f4a7abc6c357a80d5b39f.jpg

[maroman88]

wats needed to install a 4 bolt into a car that orig had a 2 bolt..??

[BonzoHansen]

wats needed to install a 4 bolt into a car that orig had a 2 bolt..??

there is zero difference. it's all under the oil plan.

[Featherburner]

I've got a GM ZZ3 crate motor with low miles. Let me know if you have an interest.

[maroman88]

there is zero difference. it's all under the oil plan.

awesome thanks

[maroman88]

would a vortec 350 work? would the carb manifold work from my 88?

http://cgi.ebay.com/ebaymotors/GM-5-7-350-330HP-Vortec-Engine-All-New-In-Crate_W0QQitemZ120467192935QQcmdZViewItemQQptZMoto rs_Car_Truck_Parts_Accessories?hash=item1c0c677c67&_trksid=p4506.c0.m245

[WildBillyT]

would a vortec 350 work? would the carb manifold work from my 88?

http://cgi.ebay.com/ebaymotors/GM-5-7-350-330HP-Vortec-Engine-All-New-In-Crate_W0QQitemZ120467192935QQcmdZViewItemQQptZMoto rs_Car_Truck_Parts_Accessories?hash=item1c0c677c67&_trksid=p4506.c0.m245

If it's a centerbolt style then yes.

[maroman88]

awesome... the vortec seems to make some decent power, if i can move escalades/tahoes i think itll handle the camaro lol

[HeadlessNorseman]

if you want to tackle a rebuild i have a 4 bolt block that needs a bore for 200 bucks. Has a good bottom end. Needs like 4-500 in machine work and heads. not a bad deal and a good learning experience!!

[The Fixer]

If it's a centerbolt style then yes.

Actually, the centerbolt heads are the same pattern from '87-'95ish, 305 or 350. The Vortec heads use a different intake bolt pattern - they have 4 on each side that just go straight down into the head. The older centerbolt heads have the bolts going into the heads on an angle.

Mike, if you have an aftermarket intake already from when you converted it to a carb, it ~may~ be machined to use on Vortec heads.

[WildBillyT]

Actually, the centerbolt heads are the same pattern from '87-'95ish, 305 or 350. The Vortec heads use a different intake bolt pattern - they have 4 on each side that just go straight down into the head. The older centerbolt heads have the bolts going into the heads on an angle.

Mike, if you have an aftermarket intake already from when you converted it to a carb, it ~may~ be machined to use on Vortec heads.

Dammit, I knew this, too. You are right. If it's an 8 bolt Vortec manifold then it will. If not, it will not and you shouldn't try to convert it. Vortec manis are not that expensive.

[BonzoHansen]

Does he need to consider fuel pumps with any of the engines listed? I'm not sure what he is using for a FP now, or if any of the ones listed create concerns, like no FP boss or no FP eccentric on the cam. Hopefully he is still using an in-tank one and a FP regulator so this is moot.

[WildBillyT]

Does he need to consider fuel pumps with any of the engines listed? I'm not sure what he is using for a FP now, or if any of the ones listed create concerns, like no FP boss or no FP eccentric on the cam. Hopefully he is still using an in-tank one and a FP regulator so this is moot.

FWIW- That ebay motor accepts a mechanical pump.

[Tru2Chevy]

FWIW- That ebay motor accepts a mechanical pump.

But you have to make sure the cam has a lobe to drive the pump pushrod.

- Justin

[LTb1ow]

Electric fuel pumps ftw!

[maroman88]

my intank pump is from when the car was TPI, with a return regulator to work with the carb.

i assume someone makes a vortec carb manifold?

[maroman88]

http://i.ebayimg.com/08/!BZm,muQBWk~$(KGrHgoH-CEEjlLly3cCBKnfRJbQJ!~~_12.JPG

[WildBillyT]

my intank pump is from when the car was TPI, with a return regulator to work with the carb.

i assume someone makes a vortec carb manifold?

That I can answer with confidence. Yes. 2116 is the Edelbrock performer, 7116 is the performer RPM, 7516 is the RPM Air Gap. There are others as well, those are just what I remember.

[maroman88]

haha nice thanks bill