Launching with a two step

[3.4 grape of wrath]

Anyone use a msd two step to launch with. I've tried using it it a couple times with no success. I have it set to 3000 rpm's and it does its popping thing but after I release the monetary button the car hesitates before getting up to speed. It seems like it's loading the cylinders with too much fuel. Any thoughts?

[1QWIKBIRD]

Sounds like you could be bogging the motor. Auto or Stick? Did you trying adding more launch RPM?

[3.4 grape of wrath]

Sounds like you could be bogging the motor. Auto or Stick? Did you trying adding more launch RPM?

It's an auto. 3000 rpm's is my max stall.

[Squirrel]

do you have a transbrake also or just the 2 step?

[3.4 grape of wrath]

do you have a transbrake also or just the 2 step?

Just the two step.

[Zero4488]

Sounds like your convertor is too tight....

[01blackz28]

Any chance you have a video? Sounds like its bogging but its hard to tell without a video.

[Zero4488]

Any chance you have a video? Sounds like its bogging but its hard to tell without a video.

Most likely...he probably needs a looser convertor....

[3.4 grape of wrath]

This is an old posting. I've solved my launching problems by upgrading my brakes now I can hold boost with no problem. I don't even need the 2 step.

[spina74]

I got the same question, only mines a manual. I'll be running the LTCC 2 step, but I'm not sure how I launch with it, also should it be hooked up to my clutch pedal so as soon as I release the clutch the 2 step deactivates or should it be hooked to a switch that I shut off after I launch and have traction.

[JerzLT1]

clutch would be the correct way to do it