Countdown for 2010

[NJ Torque]

What are you plans for the 2010 racing season???

[LTb1ow]

Actually hook, get my trap speed up, and beat Vinny.

Oh and or new engine ;)

[Blackbirdws6]

No big plans for the moment. Maybe a better drag wheel/tire setup. I'll probably start slowing piecing together a new engine as well but this will be a boosted venture so I don't plan on it happening next year unless my job is really good to me.

[mc73nova]

Fresh rebuild. New rings, bearings, lifters, rockers, cam, bake and paint the block, mag'd the crank. Hopefully get a chance to finally get it dialed in and shoot for a low(er) 10 second pass. Spent the end of the '08 season getting the car complete and doing suspension fine tuning. Only got 4 track days out of '09 because I am an idiot! I left the lifters with 700 passes in after I freshened the bottom end and it bit me in the ass. The car will be at 100% for 2010 and I hope the only thing I have to change next year are my DR's from too much useage! If you ask me this the same time next year I might say Im going for a 9.0 pass(e.t. cutoff Pro class)!

[NJ346]

Go fast enough to get booted from atco:nod:

Was the goal of this build to begin with. Over the winter the car will be getting some small upgrades. If money allows, get a 10 second pass early in the season and then pack the car away for college.

[jts98z28]

not to break anything.....

[NJ Torque]

not to break anything.....


Not gonna race it I see:rofl:

[sweetbmxrider]

turn the key and hear vroom!

[LS1ow]

id like to see mid-high 11's all motor. should be able to be done with my suspention and stuff now. we'll see.

[baddest434]

i will be running low 8's next year with what i have up my sleeve. may even see a high 7 sec pass in there:lol: someone call me out :mrgreen:

[LTb1ow]

i will be running low 8's next year with what i have up my sleeve. may even see a high 7 sec pass in there:lol: someone call me out :mrgreen:

Sure!

I may be able to spray a 200, better watch out old man! :rofl:

[mc73nova]

i will be running low 8's next year with what i have up my sleeve. may even see a high 7 sec pass in there:lol: someone call me out :mrgreen:

Ill run you heads up.


































Ill start at the 330!

[baddest434]

Sure!



tube frame+ fiberglass body = high 7's :wink:

but thats not happening for a while lol but def will be in the 8.30-8.40 range with my plans.

[Tru2Chevy]

but def will be in the 8.30-8.40 range with my plans.

new converter? finally taking some weight out of that pig?

- Justin

[Stupercharged]

turn the key and hear vroom!

OOoo OOoo I WANT THAT TOO!!!!

lol plans are to have a H/C Full Bolt on fail of an LT1 thats able to turn heads and drop jaws.. I think its obtainable

[NJ Torque]

OOoo OOoo I WANT THAT TOO!!!!

lol plans are to have a H/C Full Bolt on fail of an LT1 thats able to turn heads and drop jaws.. I think its obtainable


Opening day...

[sweetbmxrider]

new converter? finally taking some weight out of that pig?

- Justin

driver mod :D










pleaseeeeeeeeeeeeeeee!!!!!!!!!!!! i won't bitch out this time i swear :lol:

[NJ Torque]

lol plans are to have a H/C Full Bolt on fail of an LT1 thats able to turn heads and drop jaws.. I think its obtainable


Is that like dropping drawers and turning your head and coughing?:nod:

[mc73nova]

Some more things I want/need for the start of 2010 season.

http://i77.photobucket.com/albums/j54/lildevii136/18200_1_lg.jpg
http://i77.photobucket.com/albums/j54/lildevii136/EU2000IAN1_250x250.jpg
http://i77.photobucket.com/albums/j54/lildevii136/suzuki-QuadSport-LT80K6-yellow.jpg

Goal: Finish in the top half of the field in Pro bracket class.

[baddest434]

new converter? finally taking some weight out of that pig?

- Justin


right on justin!
2995 lbs w/o drivers is not to heavy. but yes a little more weight reduction and converter will be done. :wink:
plus someother little things thats will remain secret for now. wanna get some of my $$$ back from all this. i cant let the cat out of the bag just yet.

[LTb1ow]

right on justin!
2995 lbs w/o drivers is not to heavy. but yes a little more weight reduction and converter will be done. :wink:
plus someother little things thats will remain secret for now. wanna get some of my $$$ back from all this. i cant let the cat out of the bag just yet.

You are putting an LT1 in there? :shock:

Never woulda guessed Bill..

[69BirdX]

11s!!!

[baddest434]

You are putting an LT1 in there? :shock:

Never woulda guessed Bill..

BAHAHA never!!!!!!!!!:mrgreen:

[Stupercharged]

Is that like dropping drawersnod:

Yeah so you can kiss my ass as I pass you :nod:

[baddest434]

driver mod :D












you've already have seen that i can drive:moon: no driver mod needed here!

[sweetbmxrider]

you've already have seen that i can drive:moon: no driver mod needed here!

ohhh i thought you wanted to run slower! bah! your turd gen is something for me to aspire to. one of these days old man, one of these days.....

[baddest434]

ohhh i thought you wanted to run slower! bah! your turd gen is something for me to aspire to. one of these days old man, one of these days.....

the next rental i'll offer you another chance to drive this turd :lol:

[Pampered-Z]

Plan to run points, most likely street. Would like to do pro, but I'm a bit rusty!

[sweetbmxrider]

the next rental i'll offer you another chance to drive this turd :lol:

saweet! if mine ever lives again, i'll return the favor!

[BigAls87Z28]

This

http://www.webdesignetc.net/Merchant2/graphics/00000005/25534322bg.jpg

[spina74]

I atleast want to get my car to the track and NOT have to put 2 more motors in....I do have plans for a few small upgrades... get a custom cam, LTCC, GMMG, and a good set of heads(better then my stock ported),58mm TB, a set of radials, and rebuild my trans.

[Jersey_TA]

Buy a trans/convertor for the vette late spring, and see how many 10 sec slips I can get this year lol.

[Tru2Chevy]

Plan for 2010 is to have something to drag race besides the Jeep....

- Justin

[BarneyMobile]

Switching from a nozzle setup to a plate setup. Probably gonna bump the shot up alittle too:roll:

[DadsZ28]

Gears..... and headers finally......mid 11s in the normal air, right on the edge of rollbar territory. Don't want to put a bar in it. But after seeing how well that plate kit works that is so tempting!:mrgreen:

[JerzLT1]

Gears..... and headers finally......mid 11s in the normal air, right on the edge of rollbar territory. Don't want to put a bar in it. But after seeing how well that plate kit works that is so tempting!:mrgreen:

i guess i better watch out eh Greg?

[DadsZ28]

Naaa 11.50s is all I will do,you already got that!:mrgreen:

[69BirdX]

I guess Im gonna do a cam only set up since everyone is in the 11s now

[NJ Torque]

I guess Im gonna do a cam only set up since everyone is in the 11s now


:nod:

[chknhwk01]

:evil: YEAH ME TOO; CAM ONLEY, LETS SEE :idea:
OH I KNOW THE T-REX CAM BY COMP.. THAT SHOULD BE GOOD,
FOR 20 HP..:lol::lol::lol::drool::drool:

[FASTEDDIE Z]

Should be low 12's .But looking for 11's "cam only " Already started the other stuff
#1. 373's -*done (thanks Devin )
#2. SS4000 converter -*on the way
#3. 315 35 17 Drag radials -* done
#4. L/T headers and Y *(soon )
#5. BMR Torque arm -*on the way
#6. Full Tune

Just got to figure out what cam and springs to get .

So much for this not being a "Drag Race Car ":lol:
Its an ADDICTION that I though I out grew . :shrug:

[LTb1ow]

Man, I wish I could just hit 11s that easy. :|

[BarneyMobile]

Should be low 12's .But looking for 11's "cam only " Already started the other stuff
#1. 373's -*done (thanks Devin )
#2. SS4000 converter -*on the way
#3. 315 35 17 Drag radials -* done
#4. L/T headers and Y *(soon )
#5. BMR Torque arm -*on the way
#6. Full Tune

Just got to figure out what cam and springs to get .

So much for this not being a "Drag Race Car ":lol:
Its an ADDICTION that I though I out grew . :shrug:

You'll never out grow this addiction:mrgreen: Its always gonna be there. What makes it so bad is how fast you can go with very few mods in these cars. That just make you wonder "what if I add this, how much faster will it go?"

[ws6 jim]

I just want a clean pass this year to see where i'm even at. I tried to run it with 18s and street tires and had a fail of a time. I think my 3rd gen would best what the 4th gen did that night. We will see.

[HW72]

I'm a little late to the party, but uh...

I've got a few racing goals. Primarily, I wanna get the car consistent and get the driver competitive. I want to run top 4 in Englishtown's Saturday points series. I'd like to get the invite to the NHRA bracket finals in the fall, as well as an invite to do some exhibitions at Englishtown's thrill shows. I'd also like to see an 11 second time slip. Current best is 12.28, have only been to the track one weekend with the car. I absolutely want to grab an event win this year with the Camaro. I think the hardest part will be getting myself competitive quickly. Early in the year, I think I'll be going to a lot of Englishtown's Friday night stuff for seat time when I'm not working. It's maybe a 2 mile round trip, so why not... haha.

[kazman]

1. Run points in street at Cecil with the Mustang. Goal is a top 5 finish.

2. Run pro a Cecil (not sign up for points for that class) with the Mustang. Goal is to gain seat time and get to the 3rd round or better for each event.

3. Run points in street and pro with the Formula at Maple Grove. Goal is a top 5 finish in each class.

4. Run the big money footbreak races with the Formula at Cecil, Maple Grove, and Atco. Goal is to get to the quarter finals or better in each race.

5. A double win. (Win both classes on the same day).

6. A win at the Div 1 ET Finals.

7. A win at Pomona.

[Pampered-Z]

1. Run points in street at Cecil with the Mustang. Goal is a top 5 finish.

2. Run pro a Cecil (not sign up for points for that class) with the Mustang. Goal is to gain seat time and get to the 3rd round or better for each event.

3. Run points in street and pro with the Formula at Maple Grove. Goal is a top 5 finish in each class.

4. Run the big money footbreak races with the Formula at Cecil, Maple Grove, and Atco. Goal is to get to the quarter finals or better in each race.

5. A double win. (Win both classes on the same day).

6. A win at the Div 1 ET Finals.

7. A win at Pomona.

8. Grudge race Pampered-Z, looser buys the beer. Then pick up the tab later that night!



FIXED!


( yah right ) , Good luck Kaz, would be nice to face off at MG come September! although you have a much better chance then I do if being there! Fingers crossed!

[kazman]

FIXED!


( yah right ) , Good luck Kaz, would be nice to face off at MG come September! although you have a much better chance then I do if being there! Fingers crossed!

lol. Div 1 finals are at Del-Mar (US 13) this year. I wouldn't stand a chance grudge racing you (heads up). I have the Mustang set to run 14.0's at 100mph and the Formula to go 12.0's at 118mph. I may have to rethink some goals. The track schedules just came out and there are 7 races that conflict between Maple and Cecil. I may just run the Formula at Cecil until Maple opens. Maple is redoing the track surface and won't open until May 8th. The beer does sound like a great goal. :)

[Pampered-Z]

Nah, not heads up, dial'em in and lets go racing. But it gotta be F-bods. I could never live down getten beaten on by a furd!

I don't know what class I'm running until I see what the car has in it. I'd pretty sure with 7lb pulleys I can hold it at 11.50 and run street. Pro would be more fun, if the car (and driver) are very consistent and I let them try to run me down?

Goals for this year is simple: Not being in the lanes for buybacks!

[kazman]

Nah, not heads up, dial'em in and lets go racing. But it gotta be F-bods. I could never live down getten beaten on by a furd!

I don't know what class I'm running until I see what the car has in it. I'd pretty sure with 7lb pulleys I can hold it at 11.50 and run street. Pro would be more fun, if the car (and driver) are very consistent and I let them try to run me down?

Goals for this year is simple: Not being in the lanes for buybacks!


Being beaten by a furd. Well last 3 elimination rounds the near stock furd went 13.630, 13.631, and a loosing 13.629 flat out all on a 13.63 dial. Last run I took .015 stripe on a 9.50 car and broke out by .001. The 9.50 car gave me the stripe by accident (I ain't that good on the top end against that fast of a car).

You might want to sign up for street and also run pro. That will give you more seat time. I actually do a lot better in Pro backing into the faster cars.

Another goal (to stay on topic lol) be able to slow the pony by .005 when needed so I can win a few of those close ones. Give Mary Ellen or Tom that .008 and they will send you home.