transmision strength?

[jts98z28]

how strong is a stock 4l60e? i want to but a th350 or th400 but i dont really have much money right now so im thinkin that i might just put a mvb in my 4l60e and spend a lot on a rear

[WildBillyT]

Not worth going to a TH350 in my opinion. You can build a 4L60-E up pretty good. If you are pushing a lot of hp then consider going to the TH400/4L80.

Do the rear first, though. That's the real weak link.

[Tru2Chevy]

I would replace the 10 bolt before the 4L60e

- Justin

[NJ Torque]

I would replace the 10 bolt before the 4L60e

- Justin


Yup.

Even though my ten bolt went mid 11's on slicks many times...

[B4C]

Non-OD transmission FTL if you plan on driving the car on the street

[GrandmasterCow]

how strong is a stock 4l60e? i want to but a th350 or th400 but i dont really have much money right now so im thinkin that i might just put a mvb in my 4l60e and spend a lot on a rear

Take a look at the 4L80E , it's the truck equivelient. $60 from junkyard, jsut rebuild it or if u get one in good condition. You need cross member, either cut your harness or get one, and a TQ conveter that has 4l80E/4L60E. They usually can hold up more than 4L60E.

[sweetbmxrider]

Take a look at the 4L80E , it's the truck equivelient. $60 from junkyard, jsut rebuild it or if u get one in good condition. You need cross member, either cut your harness or get one, and a TQ conveter that has 4l80E/4L60E. They usually can hold up more than 4L60E.

apparently, 98 computers won't shift 4l80's

[WildBillyT]

Take a look at the 4L80E , it's the truck equivelient. $60 from junkyard, jsut rebuild it or if u get one in good condition. You need cross member, either cut your harness or get one, and a TQ conveter that has 4l80E/4L60E. They usually can hold up more than 4L60E.

The 4L80-E is a descendent of the TH400, much like the 4L60-E is a descendent of the TH350.

[jts98z28]

Not worth going to a TH350 in my opinion. You can build a 4L60-E up pretty good. If you are pushing a lot of hp then consider going to the TH400/4L80.

Do the rear first, though. That's the real weak link.

ya i was planning on doing the rear just cause ive gone through a few and only one trans

apparently, 98 computers won't shift 4l80's

if i can get a mvb for it though wont i be able to shift it?

[sweetbmxrider]

ya mvb or newer computer will work

[creeper]

how strong is a stock 4l60e? i want to but a th350 or th400 but i dont really have much money right now so im thinkin that i might just put a mvb in my 4l60e and spend a lot on a rear

stock they're rated at 360rwtq