WTB: 18" 45* angle cut 3" tips

[MyFirstZ]

anyone know where i can find a set? for around 50-100$

18" long
3" diameter
45* slash cut
single wall

[KirkEvil]

I think I saw them at pepboys, but I cant remember what the inlet diameter was. and the ends were rolled

[V]

18" long, slash cut, single wall, non-rolled edge...

3"in/3.5" outlet http://www.summitracing.com/parts/JEX-JAC418-3/ $27 each steel
http://static.summitracing.com/global/images/prod/norm/jex-pac316ss_w_m.jpg

3"in/4" outlet http://www.summitracing.com/parts/IMM-577494/ $36 each stainless steel
http://static.summitracing.com/global/images/prod/norm/imm-iac318214ns_w_m.jpg

[MyFirstZ]

thank you thank you, dont know why i could not find these

[sweetbmxrider]

i might have something like that. they are magnaflow tips that the mustang guys use IIRC. i'll check tomorrow.

[MyFirstZ]

alright sounds good let me know

[sweetbmxrider]

they are 2 1/2" inlet to 3 1/2" outlet and are 22" long. the inlet is stepped so you could expand them with a pipe expander to fit over a 3" pipe. they are unused and dirty but will clean up with compound. let me know if you are interested or want pics.

[MyFirstZ]

yeah send me some pics please, not sure if 22" will fit underneath but i am going to measure.

[sweetbmxrider]

ok i'll bring them home from work tomorrow and snap some shots for you and post them in here.

[MyFirstZ]

sounds good