WTB: black & grey 4th gen seats, LT1 intake, 92 TPI performance parts

[ShadowHawk]

Picking up a new ride and I'm looking for some parts asap, not looking to spend a fortune but i have cash. Parts need to be compatable with a 92 305 TPI car. Here's what I'm looking for...

-4th gen front seats - black cloth with grey insert, LT1 style, must be MINT, non-power would be great but i'm not picky
-Aftermarket headers & Y to fit a 92 305 TPI car (ideally SLP)
-LT1 intake, complete, with fuel rail/injectors/etc (found one for $150, wanted to do better)
-Pro 5.0 for a T5 car
-aftermarket 58mm TPI throttle body
-underdrive pulleys
-91/92 camaro gauge bezel/surround(if this is what it's called?), the trim covering the cluster
-Eibach pro kit

My e-mail is venomsvtcobra@aol.com, please include pics and asking price. Thanks!

[The Fixer]

IMO, if you're keeping the 305 in there, the 58mm TB is way overkill. There's a guy on Ebay that bores the factory ones out to 52mm for a decent price. Good luck with your new project!!

[vipergtx500]

I have seats for sale, the thread with pics are linked here http://www.njfboa.org/forums/showthread.php?t=44222

[ShadowHawk]

IMO, if you're keeping the 305 in there, the 58mm TB is way overkill. There's a guy on Ebay that bores the factory ones out to 52mm for a decent price. Good luck with your new project!!

Thanks for the advice!! I'm going to check that out. I wasn't too sure on 58mm, never looked into it.

Still looking for camaro seats in as mint shape as possible. I'd like the cloth black w/grey insert one in the LT1 cars if possible.