88' Bird 355 carbed 6 spd worked motor 4" Spintech/ Burnt Orange paint etc

[79camaro]

Im listing this car for a friend. Please do not PM about it- call him directly. Here is his description. The motor is a built 355 and this is the list of things done to it. The internals are gm forged crank , forged Manley rods, and forged Keith blacks .30 over. The comp is 10.5.1. As for the top end it's is a comp cams 557 lift hydraulic roller and lifters .100 over push rods and 1.5 rockers . The heads are edlebrock performer rpm aluminum heads with angle plugs fully assembled. The intake is edelbrock performer rpm also and the carb is a holley 750 mechanical secondary and manual choke it also has bigger jets. Now to the trans wich is a mildly built t56 six speed. The suspension has hotchkis subframe connectors, all polyurethane bushings also a sphon torque arm which is adjustable also sphon crossmember with driveshaft loop. The rear is still the stock 7.5 from a 4th gen but with 373 and an auburn posi unit. The exhaust is the best part wich is a custom peice by mufflex it is mid tie headers with 4 inch y pipe into a 4 inch single exhaust with a spin-tech muffler and turndowns the cars sounds nasty. The wheels are real 02 ws6 wheels with only front spacers because the rear is from the 4th gen and they are in mint cond. With no curb rash or nicks. The car has been 11s in the quarter and is my daily driver. All together there's is well over 13 in this car and I want 6500 obo. Btw the car only has about 15xxx miles since the motor build. And comes with extra intake manifold and wheels outlaw 2s.

If interested please call- 609 510 3035

http://i5.photobucket.com/albums/y175/79camaro/88bird-1.jpg
http://i5.photobucket.com/albums/y175/79camaro/88bird-2.jpg
http://i5.photobucket.com/albums/y175/79camaro/88bird-3.jpg
http://i5.photobucket.com/albums/y175/79camaro/88bird-4.jpg
http://i5.photobucket.com/albums/y175/79camaro/88bird-5.jpg
http://i5.photobucket.com/albums/y175/79camaro/88bird-6.jpg