PDA

View Full Version : noise in rear


Chad
06-01-2010, 10:58 PM
I have a 2000 Z28 with 3.73 gears. The gears were just put in but even before they were in i was hearing a loud humming noise coming from the rear when i would moderatly accelerate and when i would just let off the gas and let my car roll at the speed i was originally going. Some people told me its a pinion bearing but i just got all that replaced when i put the 3.73 gears in. Any clue to what it might be would be helpful. Thanks guys.

NJ Torque
06-01-2010, 11:13 PM
Could be gear lash...

What weight fluid are you running?

Chad
06-02-2010, 09:09 AM
im not sure actually...

WildBillyT
06-02-2010, 03:36 PM
How high pitched is the noise?

Chad
06-02-2010, 04:01 PM
well sometimes i can hear it over the radio, and if the radio isnt on at all its pretty loud.

B4C
06-02-2010, 04:18 PM
gear wine? Just turn the radio up :lol:

Chad
06-02-2010, 04:51 PM
yea thats what i usually do i just wanna make sure its nothing major...

IROCZman15
06-03-2010, 05:40 PM
i could be wrong, but i've heard Richmond gears are "noisy" i have 3.73 richmonds in mine and they were noisy after the install, but i've just got used to it.. and this was 6 years ago. if they ween't rchmond then maybe u have an issue where they need to be shimmed/adjusted . check the wear pattern with that special paint if the whine is that bad. or it could be a bad posi unit?

Chad
06-03-2010, 05:52 PM
they are richmond gears but i also had this noise before i put the gears in so its not that.

Slow-V6
06-05-2010, 09:39 AM
Its a 10 bolt!! nuff said!