Log in

View Full Version : Trick Flow Cam and Lifters


Whoboy580
07-28-2010, 01:13 PM
I have a slightly used (properly broken in (30mins) and 15 miles driving)
Cam is Trick Flow® Track Max® Camshafts for Small Block Chevrolet (TFS-31401002) Cam is Hydraulic flat tappet with RPM Range 3,500-6,500 ,
Duration at 050 inch Lift 246 int./254 exh. , Advertised Duration 308 int./316 exh. Valve Lift with Factory Rocker Arm Ratio 0.510 int./0.518 exh. lift
Lobe Separation (degrees) 112 Asking 70.00 obo


I also have used lifters if anyone is interested. They are Trick Flow® Hydraulic Flat Tappet Lifters (TFS-21400001)Lifter Outside Diameter (in) 0.842 in.
It is a set of 16. They were used with cam listed it above. Asking 30.00 obo

Located in National Park, NJ 08063

Whoboy580
08-09-2010, 11:14 PM
ttt

Whoboy580
08-17-2010, 11:54 AM
http://i.ebayimg.com/08/!B0KF9kg!mk~$(KGrHqIOKioE)UVfuNQ1BMZFjtZVd!~~_35.J PG

http://i.ebayimg.com/01/!B0KF60gBmk~$(KGrHqQOKnUEw88-54pjBMZFjl(Qnw~~_35.JPG

http://i.ebayimg.com/13/!B0KF36Q!Wk~$(KGrHqQOKjQE)U5,CmqnBMZFjbRoJw~~_35.J PG

http://i.ebayimg.com/11/!B0KMD7!CGk~$(KGrHqEOKiME)Rbczd8pBMZF1gQeGw~~_35.J PG