Snj largest car/automotive yard sale ever

[BlackTopKing]

REMINDER FOR TOMORROW

Date: Augs 7-8th 2010

Time: Saturday-Starting at 12:00-7:00PM

Sunday-Starting at 12:00- when ever its all gone....

Location: 132 Tuckerton Rd Shumong NJ 08088

Contact: Rj 609-556-zero six two one

As Mentioned before- I have less then Two weeks to get 80% of this gone...

I have 3 TRACKER TRAILERS Full of AUTOMOTIVE STUFF- 2 3Bay garages Full of Equipment and Supplies.

I am using the trailers to move to NC - so will need them empty.

Its unreall what I have.

Alot is used but Alot is still in boxes.

I have posted some F-Body stuff on here but I have been doing restoration and rebuilding cars for a long time. There is more old school stuff then new school- but its all there….

I will simply open the gates at 12pm on the 7th and the 8th of Augs, bring cash in hand and a friend to carry!

NO REASONABLE OFFER WILL BE TURNED DOWN.

THIS IS NO JOKE

Examples of stock

Complete Motors: Ford 5.0, Chevy 305 and 350 TPI, LT1’s and more

Blocks: 305-350-400-454

Even a 455 from 77’ BanOne call for info- Have papers to prove!!!!

30 or more Carbs: Holly’s to Edlbrock, even Predator Carbs!!

Manifolds- Everything from stock to match above to 18” High Rise to a Triple single carbs (hot rod style)

12+ grant wheels and assy new and old styles

Starters, Alts, Radiators, Trans coolers, Mufflers, Clutches, Diffs, Gears, Mass air sensors, ecu’s, Gauge clusters stock and aftermarket, flex fans, shift kits, Headers,

Dozens of Heads and Trans and Rears, Tires and Rims

Body parts- from mustang fenders to F-Body Hoods to even a Model A trunk….New 69 camaro grills and spoilers and way more….

Way way way way way way more…..

This as to be the largest ever NJ History.

I have Cars Part Cars from Grand Am- Camaro-Trans Ams

I have Titled Cars from 39 Buicks (almost complete) to 95 Trans Am …..

I have Snap on everything

TransFlush unit- most tranny shops don’t even have this (2yrs old 6,000.00 unit) wont believe the Price I got!

AC recharge units to Computer Dia’s-

Air tools to Hand Tools to lifts and even a full size DRIVE UP RAMP!!!

I am so serious about this I am asking for everyone’s help! Please Tell a friend and a Friend Twitter Facebook shop work fathers and more…please I am not into the computer to much so there are a hundred and one ways to get it out there! But I need it gone and am willing to work a major deal with anyone from the forum who dose come!!!!

I will have everything outside and in trailers to sell!

I am only keeping the 55’ Chevy- Chevelle and Harley, So please no offers.

May even sell the 70 Camaro project ( Finished Drive Line and most of Body)

Surprise sale of 88’ Gunmetal Trans Am

Contact me for any details- as I will try to hit everywere I Can

[LTb1ow]

Any old SBC single plane intakes?

[SamhainZ28]

How much for an LT1?

[92REDBIRD]

How much for the blocks? 400, 454, 455 ?

[BlackTopKing]

Any old SBC single plane intakes?

Yes, I ll get you a pic and info on what I actually ave tomorrow.

[BlackTopKing]

How much for an LT1?

I sold one s far but think i am gonna get stuck with this one due to time line- so make an offer
Its Intake to Pan with all Assy- no wire no computer.

[BlackTopKing]

How much for the blocks? 400, 454, 455 ?

The 455 is like the Holy Grail To me and have been saving for almost 8years to do a 79TA with...so pm me on that one

for the 454 and the 400,
Let me get you pic - not junk at all-all done and ready!

[BonzoHansen]

Got an 8.5" rear for a 1st gen?

[jin1481]

C3 corvette parts? rough estimate on a quadrajet carb for a '75 350?

[_87TA_]

I'm very interested in this... will try my best to make it in truck :) and will also tell a lot of people.

[BlackTopKing]

BonzoHansen Got an 8.5" rear for a 1st gen?
Honestly if I do- its Camaro 67-69, but i wont say Yes nor No yet- will hit that secotion tomarrow

jin1481 C3 corvette parts? rough estimate on a quadrajet carb for a '75 350?
This is a deff yes-I have a personal soft spot for C3's
I will get pic and info on all quads i have-plus i will get some what of a list of C3 parts- I know i have some from the below projects. Posted two Hoods in another thread but will get you more...

"Note mine, but just finished-tons of work-barn rot"
http://i151.photobucket.com/albums/s132/blacktop_kings/DSCN7778.jpg
This is my baby-hoping family member gets-asking 15K...95% done....Drive line is sick
http://i151.photobucket.com/albums/s132/blacktop_kings/DSCN7775.jpg

I truely hope so! Deff be worth your wild.
Iceman_TA I'm very interested in this... will try my best to make it in truck and will also tell a lot of people.


I want to thank everyone for the replys- It is overwelming and bit stressfull enough to have to do this let alone- How...

I like the above- because it gives me somewere to start.

At this point I am not too firm on pricing- so even the other threads-i can make some room for members...

Thanks

[BlackTopKing]

Oh Yeah I forgot...
Audio- i know some of you guys like Sound Systems... Now I a not gonna say its Yesterdays model but

I got Head units -EQ's Amps Could Box's Couple Speakers and Subs - 10Disc Changers for the trunks and so on....

It'll all be out For the Sale as well

Just another reason to mark the day

[BonzoHansen]

I await pics of the rear. Please measure the total width for the rear end flange to flange, and measure the spring perches center to center

Do you have any other 69 Camaro (or 1st gen) parts besides the grill and spoiler?

[Raist103]

What old cars do you have for sale? if you could list model and price

[BlackTopKing]

I await pics of the rear. Please measure the total width for the rear end flange to flange, and measure the spring perches center to center

Do you have any other 69 Camaro (or 1st gen) parts besides the grill and spoiler?

Ok - I will gather that together for you and Yes I do, are you looking for more of Drive Line/Exterior or Interior?

[BlackTopKing]

What old cars do you have for sale? if you could list model and price

I have The Blue corvette (above) I am kinda firm on the 15K- i got way more then that in that car- full custom Auto X set up-no joke no bs-top line.
Open to offers on-
39 buick sadan restro (dick tracy style), 70 Camaro Project (drivetrain and most of body is done)
Other than that
84Vette, 86iroc's96, 88 Trans Am
After that its newer....

[BonzoHansen]

Ok - I will gather that together for you and Yes I do, are you looking for more of Drive Line/Exterior or Interior?

whatever 1st gen part you might have.

[BlackTopKing]

whatever 1st gen part you might have.

Great- I will pull it all out for you.




NOTE:

Thanks again Guys- Really need this help.
I have a note book with 3pages from the posts, pms, and emails to get started with-
I will be leaving here about 10:15 and going to work on the treasure hunt.
I am going to bring the computer (sometimes i have signal-sometimes i dont) If i do- ill post threw out the day
If not then I will be back on around 8pm

Thanks Again- if anyone needs a faster reply for any reason
609-556-zero six two one
Thanks

[Green_Phoenix_LT1]

Ill be coming over there either sat or sunday. I put the word out on my facebook. My brother-in-law may be joining me as well since hes doing stuff to his 69 chevelle. Tools is my main focus since you don't have a lot of 4th gen stuff.

[BlackTopKing]

Ill be coming over there either sat or sunday. I put the word out on my facebook. My brother-in-law may be joining me as well since hes doing stuff to his 69 chevelle. Tools is my main focus since you don't have a lot of 4th gen stuff.

Sounds Great

[V]

so tempting! i am lucky im in NY for a few weeks straight. otherwise id probably buy a ton of stuff i dont need. its very hard to control myself ... haha

[BlackTopKing]

LTs1ow;Any old SBC single plane intakes

Ok- I double checked and am corrected- only singles are for BB, sorry.

92RED;How much for the blocks? 400, 454, 455 ?
400 block- like to see 200.00
454 block-just sold today
455 block-true bandone 77' block (car #4, built by Trans Am Specialtys, NJ)-Car was built with the 455 and used as a double- 1/2 hafe threw car was returned to TAS and replace with a 400 to double a different car which was blown- motor- then was never re installed untill 82 when my Uncle (who worked for TAS-n how i came to all of this) installed it in his Muncho TA- when he sold car, he swaped the motor out for me to keep. I am a big SNB fan. _ Block is 500.00


BonzoHensan; 8.5" 1 Gen Stuff-
Ok, I trashed them...dont know why i wasnt thinking last night- but i remebered to day.... I never really liked them and always swaped them out- teeth get crewed up and carrier always cracked- so my first thought was- shoot, gotta havea couple of them...but when i really started looking i recalled...scaping them out awail ago...Sorry, on the up side- i have gears and posi kits as well as carriers for the 8.5" but not the actuall rear- I also do have other 1st Gen Stuff- I already found stuff but will make a list and post in a thread for those-since i got a couple replys on 1st Gen stuff.

Also have 2nd Gen stuff- expecially headers, i filled a whole bay today (litterly whole floor) Long tubes, Short Tubes...galour...


NOTE:

I got alot of reply on motor and blocks-
Right now I still have the
LT1 best offer
2 Jasper 350ci carb motors ( one was in car, 88 vette-one was in truck) 4 bolt mains
327 with Aluni Intake and 3/4 cam 600.00 obo
400 stroker .60 over special made barrings Forge Pistons Aluni Heads Roller Rockers Torque Intake- Very Radical motor....Need reall CAR for this...1500.00 firm

I also dug up 3 fuel cells brand new and 4 used- but great condition....


Personal Note:
This is truely sad and depressing but worst part is....Why isnt all this stuff in my CAR...

[redsoxsstink]

Any t5 shifters?

[92REDBIRD]

Would like to get the 400 block.

[BlackTopKing]

Any t5 shifters?

Most likely...
I will get some pics.
I have about 12 auto-shifters

3x T5 trans 2(with everything to swap Auto -T5)
4X 700R4
4x 4speed lugers
AutoTrans out of 96 camaro v6
Trans out of 89 mustang
and believe it or not- but more....

[KevinW]

Hi, I was the one that asked Bonzo for the 1st gen parts. Please let me know when you have had time to look up the parts and post the list. I could be interested in any original 1st gen parts (int, engine, wiring, etc). Thanks!

[redsoxsstink]

Most likely...
I will get some pics.
I have about 12 auto-shifters

3x T5 trans 2(with everything to swap Auto -T5)
4X 700R4
4x 4speed lugers
AutoTrans out of 96 camaro v6
Trans out of 89 mustang
and believe it or not- but more....

its for a 5spd car so no auto. jw is you have a hurst or pro5.0 laying around instead of buying a new one

[iroc86NJ]

Ford 5.0 engine.

Details, pics, price? Thanks.

[Frosty]

You wouldn't happen to have 2 front gold 88-92 GTA wheels would you?

EDIT: Never mind, just saw your Fbody threads.

[BlackTopKing]

its for a 5spd car so no auto. jw is you have a hurst or pro5.0 laying around instead of buying a new one
Yeah, I think i ready your thread, asking aout short throws? right!
I will take a look at the 5speed stuff- and let you know if i got one...

[BlackTopKing]

Ford 5.0 engine.

Details, pics, price? Thanks.

will do.

[BlackTopKing]

You wouldn't happen to have 2 front gold 88-92 GTA wheels would you?

EDIT: Never mind, just saw your Fbody threads.

yeah I posted the set and the noted when sold.

but i may have singles...

I know i have-
2x C4 rims 17"
2x Iroc rims 16"
2x Firebird Rims 15" & 16"
2x Mag styles
Cragers and some others

oh-found a TSW 17" Rim -tire good and Rim is great shape-was on a 3rd gen...incase anyone has any of them

[_twisted_]

I just left you a voice message about a radiator for a 94 Formula

Thanks,
Joe

[BlackTopKing]

I just left you a voice message about a radiator for a 94 Formula

Thanks,
Joe

Yeah I just got it_ i am at the shop now and will be heading back out there in about an hour or two- soon as i get there i will look- I know i got Rad's but i want to double check whats for 4th Gens or not.

I will call you back either way- proby by 3p

[Green_Phoenix_LT1]

Do you happen to have

Hydraulic Jacks?(Good for F-body lifting)
Poly Mount inserts for LT1 motor mounts?
Header bolts for lt1(1inch 3/8-16 thread 12pt 5/16wrench size or similiar)
T-56 short shifters?
That's all I can think of at the moment, Im sure whn i go there this weekend ill be doing some impulse buying lol.

[camaro2you]

You mentioned lifts and snap on, can you possibly send me some quick shots of the two?

[_twisted_]

Yeah I just got it_ i am at the shop now and will be heading back out there in about an hour or two- soon as i get there i will look- I know i got Rad's but i want to double check whats for 4th Gens or not.

I will call you back either way- proby by 3p

Thanks for the call back - it was great talking to you.
I will get in touch when I get back to see what's left from the yard sale.

[polishdevil]

Info on the 88 TA please.

[BlackTopKing]

Ford 5.0 engine.

Details, pics, price? Thanks.

Ok- My man- finally got to this one today, as i moved the motors and actually fig what i what....

Ok

I got to Mustang motors out of 89 - one used and stock untouched with like 80K the other is stock and was Rebuilt ( this is the one i was reffering to as it was done recently and the other i been for got about)
Its stock just gaskets were shot out-leaking crazy. Motor was rebuilt and kid went to jail on me- i never got paid on this so- i got stuck with it...

Ill get pics tomorrow- as it got dark on me today before i could-
I only want to sell the rebuilt because i know its good.

[BlackTopKing]

Info on the 88 TA please.

Maybe be sold-but i will post it up tomorrow if not

[Green_Phoenix_LT1]

Do you happen to have

Hydraulic Jacks?(Good for F-body lifting)
Poly Mount inserts for LT1 motor mounts?
Header bolts for lt1(1inch 3/8-16 thread 12pt 5/16wrench size or similiar)
T-56 short shifters?
That's all I can think of at the moment, Im sure whn i go there this weekend ill be doing some impulse buying lol.

repost

[BlackTopKing]

I just want to say thank you to everyone- the responce is more then i thought and the chance to talk and meet so many memebers has been the biggest plus so far.

I am nervouse and excited for Sat and Sunday at the same time...hopefully weather holds as nice as today was.

Update the update....

Tools and Equipment- everyone who has asked about them- i have you noted and will reply but its last on my list, only reason ive held off. But will.

If I have not replyed yet or pm- i will still- have keep a notebook and been faily organized so far, just been busy.

I have all the trailers moved as some of you have seen already- and am in the process of going threw them.

If you have inquired about something in part- i will get bck to you- i know that radiators seem to be the thing this week- i got em, just got to make sure there for your car...lol

i will not sell anything that i am not 100% on.

feel free to continue- i will get to everyone.

But i just wanted to

SAY THANK YOU AGAIN

[Green_Phoenix_LT1]

^Wish I would of saw that before I posted. Now I feel like a douche lol. I guess I underestimated how much of everything you have lol.

[KevinW]

RJ, I was thinking about coming down sat, do I need to call first?

[BlackTopKing]

Mr...Green_Phoenix_LT1

"Wish I would of saw that before I posted. Now I feel like a douche lol. I guess I underestimated how much of everything you have lol."

Its cool- no worries!! but didnt forget you

Hydraulic Jacks?(Good for F-body lifting) Non are good for F-Bodies, but once i get to the Eqp. Ill let you know
Poly Mount inserts for LT1 motor mounts? Probly not
Header bolts for lt1(1inch 3/8-16 thread 12pt 5/16wrench size or similiar) Probly do
T-56 short shifters? Everyone and grandma-wants these, pending now-your next though if they dont sale
That's all I can think of at the moment, Im sure whn i go there this weekend ill be doing some impulse buying lol.

look forward to seeing you then
lol


KevinW "RJ, I was thinking about coming down sat, do I need to call first?"

Sat and Sun- Everyone is welcome
Its everyone who dosent want to wait untill Sat and Sun, I would like a call from...i dont bite, just give me a call and a heads up...:wink:

[SeanC]

I'm coming from Philly....Doesnt sound like you have too much fourth gen stuff. Is it worth coming by for some tools (not completely sure what yet - simple stuff)? Not looking to spend a ton of money but definitly trying to continue filling my tool box. If you have a good amount of stuff then i'll be there. Could you give me an idea of what kinds of hand tools you have?

[BlackTopKing]

I'm coming from Philly....Doesnt sound like you have too much fourth gen stuff. Is it worth coming by for some tools (not completely sure what yet - simple stuff)? Not looking to spend a ton of money but definitly trying to continue filling my tool box. If you have a good amount of stuff then i'll be there. Could you give me an idea of what kinds of hand tools you have?

I understand and would say at this time- keep watching the threads...
why,
tools and equipment is last for me unless its the big back breaking crap i did all day today-lol

if you dont see it a thead by Tursday them Pm me and remind me...lol-
ill let you know then.

As for 4th gen stuff...sorry not to much that hasnt sold...

[BlackTopKing]

Will POST PICS TOMORROW-PM if need


350 piston std/ .30 and cranks
cams
have 4x more 350 std blocks
and 2x more 400 std blocks

LT1 Baffles
BB Heads if interested-complete and bare
SBC Heads
SBC stock exhaust manti
SBC Headers long and short (yes green phenixLT1- ill check bolt for you)
SBC Valve covers
BB Valve Covers morse edlbrock mt's ect ect....
4spd with350 yokes and 400 yokes

3 sets of T-Top, glass.
have another TPI with harness-set up
3rd gen tail lights Camaro

Remote oil set ups-single and dual
Fuel Cells
Drop straight axle with spinals and all-36 coupe
2nd gen heater core
couple dozen ECU's just need number to match
tones of starters and alts and air compressors



Also 1st gen stuff- i will pm but, i have tons of weather stripping (new)
and I have T-Top weather stripping also- will check part number tomorrow...



Specail suprise....
Vintage Air- Fullset up in box...brand new-paid 1200 2 months ago will take 800 for everything
2x 4link with ladda bar set u, 1 is dana rear- for 1st gen
also- 15" x 15" rims and tires- BRAND SPANKING FRESH NEW!!!! but with ford bolt patter- was for 70 camaro project (gonna set up ford 9" rear)

[btownws6]

i will be there with my father in law and hopefully i can get some more people for ya

[BlackTopKing]

i will be there with my father in law and hopefully i can get some more people for ya

Great - i been busting but tryn to get this done, together and ready by Sat- gonna be a nice day- but wll have tents incase of the heat.

Friday I will put up more information of the Saturday even and hopefully a pic or to- to motivate everyone to come out.

I know i have a couple of you guys coming tomorrow, either for cars or the larger stuff, but i will try to be ready with everything to include- direction, parking, ect..

[BlackTopKing]

STUFF HAS BEEN GOING ALL WEEK AND THERE STILL IS MORE-REMINDER FOR TOMORROW!!!!

PARKING:

I am not gonna be ble to pull cars in the drive way if alot of people come- so i will have a friend at the top of the drive way to let people in. You can park right before the drive way on the road and across the drive way!

if you get a could things or anything big- our more then welcome to bring the Car and or Truck in the drive way to load up- not a problem.

But would like it if everyone came in first and then did so.

I will have about 50% of the stuff out tomorrow- so if your looking for something.
I- myself will be there to help, my uncle JAY will also be there and about 3 others. You will see US and if anything say HI!

most of the small motor stuff, odd end stuff or larger items will stay in trailers and i will continue to pull out as the day goes on...

Then comes Sunday!!! i will have the trailers empty by then, so if your local or faily close can pull it for you sat and pick up sunday- if your far let me know ill get it then...

I will try to put alittle of everything out- But most BIG BLOCK STUFF is gonna stay in trailers untill Sunday!

So if you dont see it- just ask,might suprise you and have it.

Hope hope to see tons of you guys tomorrow and sunday!!!!

SHOULD BE FUN:nod:

[donnj]

Bump for REALLY nice people to deal with and great deals on all stuff we bought. Goin back today!!!!!!!!! Thanks RJ

[btownws6]

i will be there leaving soon bc im an hour and 15 away haha

[BlackTopKing]

BUMP

[BlackTopKing]

WOW....
Guys, i truely have to say wow, thank you for everyone who came out- and hope everyone had a good time and got some good deals!
I was crazy busy as many of you saw- deff had me moving and grooving for hours today- flow didnt stop till 6pm

I like to just say thank you for everyone who did come out and for those that i didnt get to spend too much time with i am sorry and hopefull i will get a chance to soon.