MyFirstZ
08-08-2010, 10:25 PM
kenwood 8103d amp - 80$ (Bought brand new in 2008, i have the paper work)
Box 10" w/o sub - 75$ SOLD
Rack - 50$ SOLD
buyer pays shipping
These pictures where installed in my 98 camaro, currently now in my 2000.
Bought a used JL sub and it went on me so i do not feel like putting any more in, going to sell the system and just upgrade the speakers in the car and put in the factory 12 disc.
Running a jl w3 most recently, had a jl w2 that i blew a coil in by not charging the capictor completely. Had 2 kenwood subs that just couldnt not take any abuse.
http://s44.photobucket.com/albums/f31/myfirstcamaro/P1030045.jpg
http://s44.photobucket.com/albums/f31/myfirstcamaro/P1030049.jpg
Amp specs
Bass Boost Gain 0 to +18dB
Bass Boost Frequency 40 Hz
Additional Features Input level controls, subsonic filter
Amplifier Output Details 300 Watt - 4 Ohm - 20 - 200 Hz - THD 0.5% - 14.4V DC - 1 channel(s) ¦ 500 Watt - 2 Ohm - at 100 Hz - THD 0.8% - 14.4V DC - 1 channel(s)
Output Power / Total 1000 Watt
Low Pass Frequencies 50 - 200 Hz
Crossover Slope 24 dB/octave
High Level Inputs Yes
Continuous Power / Channel Qty 300 Watts x 1
Signal-To-Noise Ratio 100 dB
Response Bandwidth 5 - 200 Hz
Amplifier Output 1-channel
Crossover Active crossover
Input Signal Voltage 0.2 - 5V
Amplifier Class Class D
General Weight 6.4 lbs
Height 2.5 in
Depth 11.3 in
Width 12.5 in
Recommended Use Car
Product Type Amplifier
Connections Connector Type DC power input ( screw-type ) ¦ Speakers output ( screw-type ) ¦ 1 x audio line-out ( RCA phono x 2 ) ¦ 1 x audio line-in ( RCA phono x 2 ) ¦ Speakers input
Box 10" w/o sub - 75$ SOLD
Rack - 50$ SOLD
buyer pays shipping
These pictures where installed in my 98 camaro, currently now in my 2000.
Bought a used JL sub and it went on me so i do not feel like putting any more in, going to sell the system and just upgrade the speakers in the car and put in the factory 12 disc.
Running a jl w3 most recently, had a jl w2 that i blew a coil in by not charging the capictor completely. Had 2 kenwood subs that just couldnt not take any abuse.
http://s44.photobucket.com/albums/f31/myfirstcamaro/P1030045.jpg
http://s44.photobucket.com/albums/f31/myfirstcamaro/P1030049.jpg
Amp specs
Bass Boost Gain 0 to +18dB
Bass Boost Frequency 40 Hz
Additional Features Input level controls, subsonic filter
Amplifier Output Details 300 Watt - 4 Ohm - 20 - 200 Hz - THD 0.5% - 14.4V DC - 1 channel(s) ¦ 500 Watt - 2 Ohm - at 100 Hz - THD 0.8% - 14.4V DC - 1 channel(s)
Output Power / Total 1000 Watt
Low Pass Frequencies 50 - 200 Hz
Crossover Slope 24 dB/octave
High Level Inputs Yes
Continuous Power / Channel Qty 300 Watts x 1
Signal-To-Noise Ratio 100 dB
Response Bandwidth 5 - 200 Hz
Amplifier Output 1-channel
Crossover Active crossover
Input Signal Voltage 0.2 - 5V
Amplifier Class Class D
General Weight 6.4 lbs
Height 2.5 in
Depth 11.3 in
Width 12.5 in
Recommended Use Car
Product Type Amplifier
Connections Connector Type DC power input ( screw-type ) ¦ Speakers output ( screw-type ) ¦ 1 x audio line-out ( RCA phono x 2 ) ¦ 1 x audio line-in ( RCA phono x 2 ) ¦ Speakers input