WTB: RF Punch 40ix amp - BOUGHT

[Tru2Chevy]

I know this is prolly a long shot, but if anyone has, or know someone who has an older RF Punch 40ix amp for sale, I am looking to pick one up. Would also consider other similar amps. This is for my JL 10w1-4

Haven't had tunes in my Jeep since November, trying to get the system back together while the weather is still warm.

Let me know what you have and what you want for it.

- Justin

[MyFirstZ]

i got a threa dgoing with an amp for sale if you want it without the rack,

kenwood 8103d, it is a little more then what the RF puts out from what i was looking at for specs

kenwood 8103d amp - 100$ (Bought brand new in 2008, i have the paper work)

Bass Boost Gain 0 to +18dB
Bass Boost Frequency 40 Hz
Additional Features Input level controls, subsonic filter
Amplifier Output Details 300 Watt - 4 Ohm - 20 - 200 Hz - THD 0.5% - 14.4V DC - 1 channel(s) ¦ 500 Watt - 2 Ohm - at 100 Hz - THD 0.8% - 14.4V DC - 1 channel(s)
Output Power / Total 1000 Watt
Low Pass Frequencies 50 - 200 Hz
Crossover Slope 24 dB/octave
High Level Inputs Yes
Continuous Power / Channel Qty 300 Watts x 1
Signal-To-Noise Ratio 100 dB
Response Bandwidth 5 - 200 Hz
Amplifier Output 1-channel
Crossover Active crossover
Input Signal Voltage 0.2 - 5V
Amplifier Class Class D
General Weight 6.4 lbs
Height 2.5 in
Depth 11.3 in
Width 12.5 in
Recommended Use Car
Product Type Amplifier
Connections Connector Type DC power input ( screw-type ) ¦ Speakers output ( screw-type ) ¦ 1 x audio line-out ( RCA phono x 2 ) ¦ 1 x audio line-in ( RCA phono x 2 ) ¦ Speakers input

[Tru2Chevy]

I'm a bit of a noob when it comes to these details.....looks like your amp is rated at 300W @ 4ohms though, correct?

That's way too much....JL 10w1 is rated for 125W only. Hits hard for a little old sub though.

- Justin

[MyFirstZ]

i am to when it comes to stereo stuff.

But i figured i throw it out there for you

[Tru2Chevy]

TTT

Still looking. Something rated at 125W or less.

- Justin

[Tru2Chevy]

TTT.....getting ready to swap the system in to a new Jeep, would like to do it all in one shot. Would prefer an RF Punch 40ix, but would consider any mono or 2 channel 150W or less.

- Justin

[Tru2Chevy]

Just picked up another Punch 40ix

- Justin