View Full Version : Anybody recommend a GOOD shop to replace a headliner?
edpontiac91
08-12-2010, 03:06 PM
Just noticed that the headliner on my 1991 Firebird is starting to sag. I know you cannot repair the existing material because the foam is starting to dry rot so I need a QUALITY shop that can replace the roof with a new liner. What do these headliners cost to replace:?:
maroman88
08-12-2010, 03:17 PM
i used this place a few years ago, its in bogota... between hackensack and teaneck
http://www.electricsunroof.com
i think it was about 120 for a hardtop 3rd gen
The Fixer
08-12-2010, 03:23 PM
i used this place a few years ago, its in bogota... between hackensack and teaneck
http://www.electricsunroof.com
i think it was about 120 for a hardtop 3rd gen
They're a very clean shop, and nice guys to deal with. Years ago I had them install a sunroof in a Maxima, and they did a fantastic job. They also repaired a Cutlass I owned with the GM Astroroof - new headliner and trim. Definitely worth it, if you don't want to tackle it yourself. The aftermarket headliners molded to the ABS boards are really great - I have one in my Monte with no complaints at all.
kitten1426
08-13-2010, 05:14 PM
Everlast Interiors in Linden did a good job for me last year. About $120 I think, but I had some work done on the seats too, so I don't remember the breakdown exactly.
www.everlastinteriors.com
HardcoreZ28
08-18-2010, 09:29 PM
Ed I can do it for you as well. I've done 4 headliners in the last month so I'm in practice.
edpontiac91
08-19-2010, 07:19 PM
PM sent!
fmybody
08-19-2010, 08:16 PM
Atlas Auto Trim
Since 1938 Tops and Interiors
732 985 6800
thats where i went with my 3rd gen... they did a great job if your familiar with edison its right next to edison diner (small garage usually converatbles all parked outside)
i paid 300 all together for the new headliner (replaced the foam as well) and they redid my door panels cause they were slightly torn and coming loose as well.
edpontiac91
08-19-2010, 09:29 PM
Thanks for the help guys. I also want to get the seat bolsters done on the bottom of the drivers seat. They are starting to flatten out and do not match the passenger seat design. I guess 20 years of my fat ass are starting to pack it down!
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.