So I broke my rear end....

[LTb1ow]

Well not really, but close..

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs436.snc4/47901_1548975120321_1113366798_1630924_5050986_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs416.snc4/47961_1548974960317_1113366798_1630923_5602272_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs633.snc4/59381_1548974680310_1113366798_1630922_2969511_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs434.snc4/47737_1548915158822_1113366798_1630831_2583195_n.j pg

Lost all five studs at once, it gave no warning, just let go at around 60mph... :cry:

Wheel, rotor, caliper are all shot... and a $200 tow home... what a ****ing night. And yes, I just got home. bah. :-?

[NJ Torque]

C clip elims?

[BonzoHansen]

Forget to tighten the nuts?

[Blackbirdws6]

Ouch! Should have given me a call since you were in my neck of the woods. What happened?

[LTb1ow]

I really have no idea, I know they were tightened no less than a week ago when Adam came over to help me bleed the brakes. I had em off and then put em back on, nothing looked out of the ordinary or felt weird in the week up to today, drove up to new brunswick, commuted to work etc etc.

And then coming home, just cruising at a slow speed, no street racing or hard launches and bam, I am grinding all over the road. I know that the culprit for this is loose lugs, but I know I tightened them all. Either way, I am in a not so good place.

[The Fixer]

Yeah, losing wheel studs is scary as hell - I lost two on a front wheel and almost lost the wheel last year, I couldn't even imagine how crazy yours must have felt! Glad you got home in one piece man!

Here's mine -

http://i256.photobucket.com/albums/hh190/TPIMonteSS/wheelstud_poster.jpg

[madness410]

dam dude thats unreal...i wonder how that happened without hearing noise or anything. sorry to hear about your misfortune ill be on the lookout for a zr1 rim for you

[transmaro93]

damn matt... im glad your OK at least dude and didnt loose control and crash. I dont understand how you lost all 5 though that is crazy...you should have called me to come out for the tow... i have AAA i would have let you use it being it would have only been like 10 miles or so....

[LTb1ow]

damn matt... im glad your OK at least dude and didnt loose control and crash. I dont understand how you lost all 5 though that is crazy...you should have called me to come out for the tow... i have AAA i would have let you use it being it would have only been like 10 miles or so....

This was pretty late/early in the morning man, didn't wanna make you drive all the way back up to where I was, but thanks man.

I got 5 studs/lugs from adavance, but I am thinking I will return them, and do it with ARP extended studs. Gotta do rotor/pads as well, the rotor really dug into the pads when it was loose and turning on the ground.

Snowball effect, go go. :-?

[transmaro93]

yea man... i mean to save you 200 bills though you could have payed me with a porkroll egg and cheese... if something like that happens again close to your house or in the shore area please call dude its not a big deal... you should really think about getting some AAA plus though its really helpful..

[NJ Torque]

If you were in bruns... I was actually heading home from down south... could have always gotten my trailer....

[LTb1ow]

Nah, I was just saying I had been up in new bruns the other night, and nothing had happened. I was down at the southern end of rt 18 on 138... me and the cold.

Just a better pic of the hub, the holes are all elongated.. so I'm a fail me thinks.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs430.snc4/47275_1549323689035_1113366798_1631680_1303136_n.j pg'

[transmaro93]

dude thats crazy... ill tell you what im off the hook for loosing 2 lugs that time.. after kirks ordeal and now this.... hahah hope you get her back up and running soon..

[LTb1ow]

dude thats crazy... ill tell you what im off the hook for loosing 2 lugs that time.. after kirks ordeal and now this.... hahah hope you get her back up and running soon..

Yea, thats what Al and I were talking about, he is afraid he is next, and since every time it got worse...you lost a lug, Kirk lost a few studs, I lost a wheel... he is due to lose the whole rear end. :lol:

Hopefully it will make it to Nats. I hope at least. Parts are too damn expensive. This is my rear end getting back at me for giving so much attention to the damn engine.

[sweetbmxrider]

coffee table mod? i'm just glad you didn't wipe. let me know when you need a hand. i got a gun obviously and a stud puller, should be fun with the extended guys.

[LTb1ow]

Yea I am gonna try and order the studs sometime this week, prob change the axle seal and bearing as well. Dunno if that kind of shock could effect the center section, but I guess I can pull the cover and check that too.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs635.snc4/59573_1549344849564_1113366798_1631756_7985503_n.j pg

Hey, at least the rotor is straight! :lol: Just kinda.. ya know.. crooked.

[transmaro93]

sweet jack stands... get them at the home depot?

[Jersey Mike]

Dude, I'm just glad you're alright. That could have been really ugly, really easily.

[NJ346]

Wow that sucks matt. Atleast it doesn't look like there was any damage to the body of the car.

[LTb1ow]

sweet jack stands... get them at the home depot?

I got it off the flat bed and up my driveway on one of your harbor freight specials pal. Had to use the wood to raise the car up so I could move the dolly around and now its gonna sit like that.

[transmaro93]

hahah glad i could be of assistance....

[WildBillyT]

Glad you are OK and that the rim was the only casualty.

[WildBillyT]

Nah, I was just saying I had been up in new bruns the other night, and nothing had happened. I was down at the southern end of rt 18 on 138... me and the cold.

Just a better pic of the hub, the holes are all elongated.. so I'm a fail me thinks.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs430.snc4/47275_1549323689035_1113366798_1631680_1303136_n.j pg'

Just saw in another thread that you had OEM ZR1's. Crazy, seeing as how I thought these rims were originally a unilug style based on this pic. Casting FTL?

[JL8Jeff]

Man, that wheel looks like it must have been loose at some point in time and abused to elongate the holes.

[BigAls87Z28]

It was pretty damn ugly!
Yeah, Im next. I expect the 10 bolt to just fall out fo the back of the car. Maybe it will shoot the axles out first, who knows.

[LTb1ow]

Man, that wheel looks like it must have been loose at some point in time and abused to elongate the holes.

Couldn't have been for more than the trip home that night, I dunno.

Just lame.

[Anti_Rice_Guy]

That's crazy, that really sucks Matt. Are you going to stay with ZR1s?

[Foosh]

Damn man, glad to see that it wasn't any worse... I'll be on the lookout for a new wheel for you too.

[NastyEllEssWon]

Yea, thats what Al and I were talking about, he is afraid he is next, and since every time it got worse...you lost a lug, Kirk lost a few studs, I lost a wheel... he is due to lose the whole rear end. :lol:






i see a pattern here :lol: just kidding man, that sucks ass. this is why i always make sure i torque my wheels and retorque them a few days later after some driving. at least you didnt bust anything or hit anyone. glad your safe

[redsoxsstink]

got a set of snowflakers with kuhmos with 9k on them for cheap if you want em

[BonzoHansen]

Yea, thats what Al and I were talking about, he is afraid he is next, and since every time it got worse...you lost a lug, Kirk lost a few studs, I lost a wheel... he is due to lose the whole rear end. :lol:

why are all you guys losing lug nuts? you need a group buy on torque wrenches or something?

[MyFirstZ]

Man, that wheel looks like it must have been loose at some point in time and abused to elongate the holes.

that is exaclty what i was thinking

i have seen cars come in to when the caliper bolt was left loose, backed out and locked up the wheel and destroyed the inside of the rim like that.

[sweetbmxrider]

why are all you guys losing lug nuts? you need a group buy on torque wrenches or something?

let it be known that i have never tightened any of their lugs.

[V]

let it be known that i have never tightened any of their lugs.


but have you un-tightened any of them... thats the question... ;-)

[sweetbmxrider]

i ain't sayin nothin!

[transmaro93]

let it be known that i have never tightened any of their lugs.

your car makes like 30HP its not enough to loosen lugs!

[Formula_Ltx]

sounds to me like someone doesnt like u. watch ur back people are grimey like that! glad to see that ur ok an not too much damage

[Featherburner]

How can you drive around and NOT know your wheel is loose? What a NEWB F up!!!

[LTb1ow]

Dumb me.

[NJ346]

How can you drive around and NOT know your wheel is loose? What a NEWB F up!!!

Nah, thats just typical Matt for you.