wtb 3.42 or higher ratio 4th gen rear - BOUGHT

[Flippindabird]

prefer from 98 and up but if its nice ill take a 93+ must have 3.42s or higher numerically, prefer with brakes but again if its nice ill take it, ill pay 275 cash or lower

[2kblackgtp]

If you find a rear without the gears your looking for, I have a set of perfect condition 3.42 60k miles stock gears ill sell for 40 bucks

[Flippindabird]

ill give you 100 if you come install them hows that? i could even bring the rear to ya, i have a 323 that i didnt want to change the gears in

[Flippindabird]

ttt

[Flippindabird]

could someone make me a price list of the parts i would need to install the rear gears?? i wanna add up the cost and the labor and see how much it would be

[deadtrend1]

ballpark 300 for labor, 200 for gears, 100 for install kit, and 20 bucks in additive and oil

[JSPERFORMANCE]

A little low on the parts prices but thats in the right ballpark..

[Flippindabird]

thanks guys i def want to get a complete rear then 650 is way too much to spend on something that still has to be sand blasted and painted

[Flippindabird]

tttplease

[alamantia]

I'd do $400 on the one thats in my car now. It is a 3 channel with genuine AAM 4.10 gears, auburn posi, stock axles, sphoon welded LCA brackets and comes with backing plates. It has already been sanded and painted and has a brand new inspection cover on it. Let me know...

[Flippindabird]

sounds real good man but the gears are too steep ive got a 700r4 and first gear is 3.06 that coupled with 411 would be WAY tall thanks though... if i was running a stick id grab it

[alamantia]

I understand. I also have the 3.42 ring and pinion that came out of it that i would throw in the sale or sell seperate if you decide you need um.

[Formula_Ltx]

I'd do $400 on the one thats in my car now. It is a 3 channel with genuine AAM 4.10 gears, auburn posi, stock axles, sphoon welded LCA brackets and comes with backing plates. It has already been sanded and painted and has a brand new inspection cover on it. Let me know...

if he's not interested I am my rear is jus about done, its pretty bad. I did a six speed swap bout 2yrs ago but still have the auto rear with 2.73's which is horrible. so i need to find something soon cause its my DD an dont want it to give out on the highway.

[Flippindabird]

yeah im not interested its too steep for me i wish i could use it but im afraid with those gears and a 700r4 w/ 400+ lb/ft the tranny wont last... my 96 Formula 3.23 rear is for sale CHEAP $175obo nothing wrong mechanically but its real rusty i cant see putting the rust on my car it will just look out of place and horrible, really want it out of my yard, and i can use some cash towards the next rear...

[Whiplash Performance]

Is there any way to check what rear gearing is in the car?
I'm heading to a bone yard this weekend and they have a few 3rd gens there.

[Flippindabird]

in a third gen its pretty random in my experience, ive seen 2.73 1 leggers in 350 tpi cars from the factory... and i THINK they never came with anything higher then 3.42 in manual 305tpi cars... but a friend of mine claims to have had 3.73s(unconfirmed) but its kind of hard to say for sure without counting... i got a rear that definately has 3.23s and is good and will fit your thirdgen $175 probably not much cheaper at the JY

[Whiplash Performance]

in a third gen its pretty random in my experience, ive seen 2.73 1 leggers in 350 tpi cars from the factory... and i THINK they never came with anything higher then 3.42 in manual 305tpi cars... but a friend of mine claims to have had 3.73s(unconfirmed) but its kind of hard to say for sure without counting... i got a rear that definately has 3.23s and is good and will fit your thirdgen $175 probably not much cheaper at the JY

There's a few fourth gen there too 99% v6s though, is there a tag or something I could look at?

[Flippindabird]

sorry i do not know what to look for other then v8 4th gen manuals mostly came with 3.42s and autos only came with 2.73 or 3.23 but there is always the odd one that someone ordered

[deadtrend1]

if you can wait like 2 weeks, I will be pulling the 3.42 4 channel rear end out of my 96 TA.

you would need to buy brake calipers though.

[Flippindabird]

how much and is it perty?(how does it look):nod:

[deadtrend1]

how much and is it perty?:nod:

$200 firm, and what are you talking about "perty"?

[Flippindabird]

im talking about does it look nice

[Flippindabird]

no pics yet?

[Flippindabird]

ok im going to amend this to... i want a 3.42 ratio preferably LS1 rear, with brakes and lines MUST HAVE PICS if im not 15 mins down the road from you i have to see it before i come get it, thanks 8-)

[Flippindabird]

still need one, last piece to the drivetrain puzzle then i can start on the suspension!

[NJ Torque]

ok im going to amend this to... i want a 3.42 ratio preferably LS1 rear, with brakes and lines MUST HAVE PICS if im not 15 mins down the road from you i have to see it before i come get it, thanks 8-)


Have a 3.73 rear, LS1 backing plates, no lines, nor brakes...

New richmond gears, eaton posi... $275.

[Flippindabird]

Nevermind, just found a great one, whole setup with 3.42s brakes, aftermarket LCAs from a 02 SS with 60k $325