NJ Torque
10-27-2010, 10:54 PM
Set of M/T ET Street radials 275/50R15 with 1 burnout, no cuts/damage/patchs/plugs - $300
Set of Weld Prostar wheels 15x3.5 and 15x10 w/7.0" BS, front tires are good 155R radials and rears are 325/50R15 ET Street radials that are past the wear bars and the center lines are just gone... Good for a few more passes - $700 - Do not want to split
Tick Perf "Polluter" Cam (24x/24x (.61x"/.61x") 112LSA) - NIB $330
Moser 12 bolt rear, 3 channel, 33 spline axles, spool, 4.11 gears, 5/8" studs, TA Aluminum cover, BMR relocation brakets installed, LS1 backing plates - $2000
SLP Lid - $65
Spohn rear sway bar, red, SKU # 923-Rear NIB - $125
Yank ST3500 converter, about 3000 miles behind a cammed 346 - $350
UMI Tubular Torque arm, red, Some PC is coming off of the rear #2206 $150
Will add more as I go through the garage...
Set of Weld Prostar wheels 15x3.5 and 15x10 w/7.0" BS, front tires are good 155R radials and rears are 325/50R15 ET Street radials that are past the wear bars and the center lines are just gone... Good for a few more passes - $700 - Do not want to split
Tick Perf "Polluter" Cam (24x/24x (.61x"/.61x") 112LSA) - NIB $330
Moser 12 bolt rear, 3 channel, 33 spline axles, spool, 4.11 gears, 5/8" studs, TA Aluminum cover, BMR relocation brakets installed, LS1 backing plates - $2000
SLP Lid - $65
Spohn rear sway bar, red, SKU # 923-Rear NIB - $125
Yank ST3500 converter, about 3000 miles behind a cammed 346 - $350
UMI Tubular Torque arm, red, Some PC is coming off of the rear #2206 $150
Will add more as I go through the garage...