dpmalibu
01-08-2011, 04:48 PM
--------------------------------------------------------------------------------
just like title says I just got another 84 Z/28 for parts. This one is not going to get stripped down too much b/c I plan on selling most of it as a roller as soon as I get the title. It has a 91 nose, high rise spoiler and ground efx on it. It is very solid. Floors,1/4's, trunk area, pass. door, fenders are all solid.It is a T-top car w/ sub frame connectors and an Competition Engineering 8pt roll cage. The rear is a stock open diff 10 bolt. The dash pad is almost perfect other than a hole drill in the middle for the tach wire. It has a digital dash (don't know if that is stock or out of a T/A). The interior has a stock console with a B+M mega shifter. It has (1) plastic racing bucket seat.
Here is a list of the exterior parts that are for sale:
1) Harwood 4" bolt on cowl hood in perfect shape $425
2) (4) 17x8" SLP chrome 5 spoke wheels w/ tires and 2" spacers. (Wheels are almost perfect other than one wheel is peeling. No curb rash. Tires have a lot of tread but has some dry rot). $500
3) Tail light covers (have to check condition) $20
4) Headlight covers (have to check condition) $15
5) Edelbrock STB for Carb/TBI
Interior parts for sale:
1) B+M Console Megashifter for T-350 $85
2) Almost perfect dash pad w/ hole drilled in middle for tach wire to run thru $95
3) Plastic racing buckets w/ seat track $40
4) Autometer 5" tach $100
5) triple gauge (oil press, water temp, volts) $20
Drivetrain parts:
1) T-350 manual reverse valve body has approx. 6-8k miles $500
2) Custom mandrel bent Mufflex exhaustw/ headers : has custom 3" Y-pipe which goes into a 4" intermediate pipe into a Spintech muffler w/ dual 3" tailpipes. Unknown shorty headers Ii'll have to check them) $500
3) another set of shorty headers $95
4) mini starter dual bolt pattern (don't know brand $75
5) MSD 6AL $125
6) MSD HEI distributor $80
7) 3 core radiator $85
8) Electric fan ( I beleve it's 16" but I'll measure it) $60
9) Carter 750 carb (heavily oxidized. been sitting awhile) needs rebuild $75
I'll start looking at this stuff and closely checking out condition in next day or so before it snows again.
Located in Hatboro,Pa
Pics:
http://i272.photobucket.com/albums/jj166/dpmalibu/023-1.jpg
http://i272.photobucket.com/albums/jj166/dpmalibu/024-1.jpg
http://i272.photobucket.com/albums/jj166/dpmalibu/025.jpg
just like title says I just got another 84 Z/28 for parts. This one is not going to get stripped down too much b/c I plan on selling most of it as a roller as soon as I get the title. It has a 91 nose, high rise spoiler and ground efx on it. It is very solid. Floors,1/4's, trunk area, pass. door, fenders are all solid.It is a T-top car w/ sub frame connectors and an Competition Engineering 8pt roll cage. The rear is a stock open diff 10 bolt. The dash pad is almost perfect other than a hole drill in the middle for the tach wire. It has a digital dash (don't know if that is stock or out of a T/A). The interior has a stock console with a B+M mega shifter. It has (1) plastic racing bucket seat.
Here is a list of the exterior parts that are for sale:
1) Harwood 4" bolt on cowl hood in perfect shape $425
2) (4) 17x8" SLP chrome 5 spoke wheels w/ tires and 2" spacers. (Wheels are almost perfect other than one wheel is peeling. No curb rash. Tires have a lot of tread but has some dry rot). $500
3) Tail light covers (have to check condition) $20
4) Headlight covers (have to check condition) $15
5) Edelbrock STB for Carb/TBI
Interior parts for sale:
1) B+M Console Megashifter for T-350 $85
2) Almost perfect dash pad w/ hole drilled in middle for tach wire to run thru $95
3) Plastic racing buckets w/ seat track $40
4) Autometer 5" tach $100
5) triple gauge (oil press, water temp, volts) $20
Drivetrain parts:
1) T-350 manual reverse valve body has approx. 6-8k miles $500
2) Custom mandrel bent Mufflex exhaustw/ headers : has custom 3" Y-pipe which goes into a 4" intermediate pipe into a Spintech muffler w/ dual 3" tailpipes. Unknown shorty headers Ii'll have to check them) $500
3) another set of shorty headers $95
4) mini starter dual bolt pattern (don't know brand $75
5) MSD 6AL $125
6) MSD HEI distributor $80
7) 3 core radiator $85
8) Electric fan ( I beleve it's 16" but I'll measure it) $60
9) Carter 750 carb (heavily oxidized. been sitting awhile) needs rebuild $75
I'll start looking at this stuff and closely checking out condition in next day or so before it snows again.
Located in Hatboro,Pa
Pics:
http://i272.photobucket.com/albums/jj166/dpmalibu/023-1.jpg
http://i272.photobucket.com/albums/jj166/dpmalibu/024-1.jpg
http://i272.photobucket.com/albums/jj166/dpmalibu/025.jpg