Log in

View Full Version : Mostly free stuff. 4th Gen.


Formulalt1
05-11-2011, 07:18 PM
I am cleaning out my garage and have a metal guy coming by to pick up my scrap stuff. So if anyone wants any of this stuff, let me know and give me a time frame when you can pick it up. I have listed some of it before and had some interest but no one ever picks it up.

Got a free LT1 block out of a 93 camaro (just the crank, oil pan and knock sensor on it). I have had it sitting on a engine stand in the garage way too long and there is some surface rust in a few of the cylinders but should be fine for a rebuild.

Free 93 - 97 Firebird/Formula hood stock blue. Please someone take this friggin thing.



I got a 95+ vented opti, I bought off ebay like 2 years ago but went with a accel unit before I installed it. $20.


I have a ton of other stuff in need (like axles, diffentials (posi and open), LT1 sensors valve covers, timing covers, hubs, pulleys and so on) just let me know if you need anything for a stock LT1 or rear parts.

I have 2 LT1 harness: One for a 93 LT1 and one for a 94 + LT1 (complete with Fuse block). Both are in good shape and for a Auto but can be used for a 6 speed if you splice in the connectors. $75 each.

B-body accessory bracket. $15

Free 4 wheel disc 4th gen e-brake cables- good condition.

BullittSVT
05-11-2011, 07:47 PM
Do the wheels come with rubber?

Formulalt1
05-11-2011, 08:04 PM
No tires. I have a set of 5 star Firebird wheels I will let go cheap with tires but I have to look at the tires to see what kind of shape they are in though, I don't remember off hand as it was like 2 or 3 years the last time they where on the car.

Formulalt1
05-11-2011, 08:46 PM
Ok, I just went and checked the other set of wheels, I would recommend changing two of the tires. I do remember one of the wheels use to slowly loose pressure if the car sat for a while. If you are just looking for a good set of tires I would recommend going another route.

spina74
05-11-2011, 09:31 PM
Id like to get the block,crank, and pan off you. How far are your from camden county?

86ta-adf
05-11-2011, 09:42 PM
Any posi lockers?

Formulalt1
05-11-2011, 09:56 PM
Id like to get the block,crank, and pan off you. How far are your from camden county?I am right around a hour away (east on 195). Lakewood is by Point Pleasant and Toms River. Block is yours as long as you can get it out of here soon.

Formulalt1
05-11-2011, 09:58 PM
Any posi lockers?
I do but someone shot me a PM about it already, Let me look around more I may have another eaton unit around here somewhere, I will let you know tommorow.

86ta-adf
05-12-2011, 10:07 AM
I do but someone shot me a PM about it already, Let me look around more I may have another eaton unit around here somewhere, I will let you know tommorow.

Cool thanks

Formulalt1
05-12-2011, 02:22 PM
Cool thanks
Sorry, I checked and all my other carriers where open units and I gave them to my metal guy today anyway. I have someone supposedly coming tommorow morning for the one eaton unit I have left, if for some reason he doesn't show up or decides to not take it, its yours.

dpmalibu
05-12-2011, 02:23 PM
Do you have any pics of the wheels? I am more than likely will take them but just wanted see what kind of shape they are in before I drive an 1.5 hours to get them. Thanks

BonzoHansen
05-12-2011, 02:23 PM
does the fan shroud have flapper doors on it?

Formulalt1
05-12-2011, 02:33 PM
Do you have any pics of the wheels? I am more than likely will take them but just wanted see what kind of shape they are in before I drive an 1.5 hours to get them. Thanks
Pics can be seen here http://www.njfboa.org/forums/showthread.php?t=43457 however. I already have someone who said they want the wheels ahead of you but if they don't pic them up this weekend they are yours.

Formulalt1
05-12-2011, 02:40 PM
Sorry for not updating this but alot of people asking for the items are via PM, anyway. Items that people have asked to pick up are
S.J.SLEEPER:
posi unit
dual fan
injectors
firebird wheels

nj85z28 :
Fuel Sending unit.

If either of these pick up doesn't happen I will contact the next person that showed interest.

Oh and for some reason I thought I removed the pistons and rods from that block but I didn't as they where still in it when I looked at it today.

86ta-adf
05-12-2011, 04:34 PM
Sorry, I checked and all my other carriers where open units and I gave them to my metal guy today anyway. I have someone supposedly coming tommorow morning for the one eaton unit I have left, if for some reason he doesn't show up or decides to not take it, its yours.

Ok just let me know

Formulalt1
05-12-2011, 05:41 PM
does the fan shroud have flapper doors on it?Sorry I didn't answer earlier but the fans are most likely gone but incase they are not, yes this is the flapper door model (early LT1).

emolineaux
05-12-2011, 08:47 PM
hey sent ya a pm.

ill take that 93 timing cover. shoot me a price on the lt1 valve covers also. and if you have that rear main seal housing let me know. can pick up one night next week if your free.

dpmalibu
05-12-2011, 10:04 PM
Ok lthanks. Let me know

BonzoHansen
05-12-2011, 10:15 PM
Sorry I didn't answer earlier but the fans are most likely gone but incase they are not, yes this is the flapper door model (early LT1).

cool. if they have to flapper doors & they are available again i'll take them.

madness410
05-14-2011, 07:19 PM
i work right next to lakewood and i am working tomorrow. i can pick up the wheels by tomorrow if you would be willing to give them to me. pm me if interested.

Formulalt1
05-14-2011, 10:06 PM
Sorry Madness, I have like 3 people ahead of you interested in the wheels and SJ, had to reschedule to pick them up Tuesday. I am currently in Long Island and won't be back in Jersey til sometime monday, (not sure what time yet) so no pick up's on anything available til Tuesday.

Rich2279
05-14-2011, 10:21 PM
Add me to the list for that posi if it is a 3 series carrier.

Formulalt1
05-14-2011, 10:34 PM
Yes it is a 3 series and you are added.

Rich2279
05-15-2011, 12:45 AM
Sweet, what # am I? I could really use a 3 series carrier w/ gears.

Formulalt1
05-16-2011, 06:32 PM
Sweet, what # am I? I could really use a 3 series carrier w/ gears.
You are 3rd and this doesn't have gears on it though.

Formulalt1
05-16-2011, 06:39 PM
Update: Ok, Sending Unit is taken. Everything else as of right now is still here but anyone who is first on the list for anything and can't get it out of here this week, sorry but I am moving on to the next person. I have way too many projects going on and I need the room in my garage. I will not hold anything for anybody (cause the point of giving away most of this stuff and selling it dirt cheap was to get it out of my way or clear off a shelf) and I will not ship (unless you somehow already talked me into it, which I really don't want to do).

Rich2279
05-16-2011, 07:57 PM
You are 3rd and this doesn't have gears on it though.

ok, sounds good.

mandinggo01
05-17-2011, 02:16 AM
still got the block and injectors and where u located can pick up asap

Formulalt1
05-18-2011, 03:49 PM
Update: Injectors, Posi and wheels are gone.
Also added a B-body LT! accessory bracket and 2 harnesses.

Formulalt1
05-18-2011, 08:32 PM
Fans are gone.