Help with bolts for a lower A-Arm 93-02

[Blacdout96]

I'm trying to finish up project big foot (pics when finished) and literally the last bolt before I can take out my A-Arms to have new ball joints pressed in, is rusted frozen solid in there. I haveto cut it out, and I'll need a new one, but I'd prefer to replace both. Who's parting out a 93-02 Camaro/Firebird. It's be best if you are in the South jersey area. I kinda need to get these ASAP as well. Thanks guys

[WildBillyT]

You can't get them new?

[Blacdout96]

I'll call a few dealerships around here, but who knows if they have them in stock. I just didn't know if someone is parting out a car and I could swing by after work and pick them up.

[sweetbmxrider]

Should have said something a month ago. Try spohn etc.

[edpontiac91]

Have you tried WD-40? Spray it on so that it is soaked and let it sit for several hours. Then use a hammer to help break it up and maybe a small propane torch and apply some heat.

[Blacdout96]

Have you tried WD-40? Spray it on so that it is soaked and let it sit for several hours. Then use a hammer to help break it up and maybe a small propane torch and apply some heat.

Did it, did it, and did it lol. I just cut it out because I don't need a deteriorated bolt anyway, the other side was almost the same way, and the pit marks and what not on that one alone makes me not want to re use it.

I got out my BFH to hit it out, and when that didn't move ,I got out my RBFH, and that didn't do squat. Maybe I should of asked smash to come over, and see if his hulk-smashing of the hammer could bust it out :rofl:

[Kat]

HEY LOOK HERE!!! YES HERE!! CLICK THIS!!! (http://www.spohn.net/shop/1993-1997-GM-F-Body/Suspension/Tubular-Front-A-Arms/)

;)