PDA

View Full Version : a pair of zr1 style rims and some misc stuff.


jam01
07-31-2011, 06:29 PM
i have a pair of zr1 style rims, these are not factory. i bought them while i was in fla, no dings, bends or scuffing. i was going to use them for drag radials but decided on just a whole new set of rims. i would like to get about $300.00 for the rims. i also have a brand new left side rocker for 82 through 84 z/28, this is factory gm. also an inner plastic fender liner left side, brand new gm part.
i have a factory emissions pipe for 82 through at least 84 305, it runs from the valve to the converter, this also is brand new gm part.i am not sure what to ask for the other parts, i have had them for almost fifteen years. make any reasonable offer. i also have a rear hatch with defrost, along with a pair of t-tops for an 87 camaro.

jam01
07-31-2011, 06:32 PM
more pictures.

jam01
08-03-2011, 09:54 AM
i have a very good set of trailbalzer floor mats, front and back light gray no stains.

jam01
08-04-2011, 08:49 AM
RiggsLW81 i tried pm you back, your box is full.

jam01
08-05-2011, 04:11 PM
pics of t-tops. the rubber that rest against the window is not dry rotted, it may need some lube to help it but is not bad at all. the top seal or flap that you see from the top is pulled out a little on both tops, not sure if the can be fixed or not. both pins work for the lock mechanism, i have no keys for them.

jam01
08-05-2011, 04:13 PM
they also appear to be mirrored on the inside.

jam01
08-08-2011, 04:57 PM
just the front seats out of a 89 convert, good set to rebuild. make an offer.

jam01
08-11-2011, 01:08 PM
i also have a rear sub enclosure, the subs are jbl's old and havent been used in about 5 years. the box is still good also have front speakers with cross overs there a set of infinity's. bought all this in 98 for a third gen. make an offer ill get some pics up in a bit.

jam01
08-19-2011, 12:33 PM
lowering the price on the pair of rims to $225.00. i also have a bunch of odd parts left over from all my 3rd gens. most of the good stuff i already sold but you never know, or im not sure what i have left.

NjbadSS
08-19-2011, 10:16 PM
Are the wheels 17 by 9?

jam01
08-20-2011, 10:30 AM
Are the wheels 17 by 9?

they are 17 X 9.5, they are the same size as my rims from slp.

jam01
08-31-2011, 11:46 AM
third gen armrests in black good shape, also a pair of gray armrests not so good the usual peel off the plastic. third gen stock shifter out of my 83 i also have the shifter bezel.

jam01
09-15-2011, 09:09 AM
bump.

jam01
03-10-2012, 02:52 PM
anyone need a working ac compressor and lines, this came off of my 83 z. it spins freely and when i removed it it was still functioning. lines are in good shape. i also have an hpi rs4 nitro car it is belt driven 4 wheel drive, new engine and lots of parts. everything else is still for sale , more to come