Whoboy580
09-10-2011, 11:16 AM
I have a 1986 Camaro Z28. Its a five speed car that has a TKO600 trans. Its like a dark blue color and it in good condition. It is t-top car with new seals. Has a cowl induction hood. It has Brand New Lakewood 90/10 in front and Brand New Lakewood 50/50 with Brand New Stock Height Springs, UMI Panhard Bar Relocation Kit, UMI Adjustable Panhard Bar, 4th Gen Rear, 4.10 Gears, Posi Unit, Competition Engineering Sump Gas Tank, 140 GPH Fuel Pump, S.S. Braid Fuel Lines, Battery Relocation, UMI Wonder Bar, Auto Meter 5in Tach, Auto Meter Water Temp, Auto Meter Oil Pressure,Auto Meter Volt Gauge, Electric Fuel Pump External mounted, 16 inch Electric fan, aluminum radiator.S-10 manual steering box, Spohn TKO600 crossmember.
Motor in the car is a SBC 350 4 bolt main 1 piece rear main seal which 3.75 forged Scat Crank and 6 inch Forged H-Beam Rods with KB Forged Pistons bored out .30. Motor has a total of 56 miles on it. Has brand new main bearings, connecting rod bearings, and all new gaskets. Its Rotating assembly is Scat Internal balanced. All Forged with H-Beam Rods. Keith Black Forged pistons. Rods are 6in. Trick flow Super 23 195 Alu. Heads,Trick Flow® Roller Rocker Arms, Trick Flow® Chromemoly Pushrods,Trick Flow Hydraulic Flat Tappet Track Max Camshafts (.510/.518 lift ),Trick Flow® Billet Steel Timing Sets, Edelbrock Victor Jr Intake, Holley 750Dp Carb with choke milled off just rebuilt, Moroso 7qt storker oil pan. Exahust is Hooker Super Comp Long Tube Headers, Custom made exhaust that dumps right before axle.Has Weld Pro Star with M/T Drag Radials on the back with Stock Iroc rims and goodyear tires on the front. But I do have Weld Pro Stars with Skinny for the front just needs new tires, Also have the stock back wheels too.
Trans in the car is a brand New TKO600 from Amp Performance. Has Lakewood Blowproof bellhousing. Trans just needs Fluid put in it,torque arm hooked up, Clutch boot install on bellhousing and shifter handle made up. Had custom speedo gear made up so the Speedo will be correct with gears and tires.
Also comes with UMI sub frame connectors never install (weld in kind), Weld Racing Pro Star (front) and complete 150 shot Nitrous Snipper Kit.
Asking 12,500 obo
Would keep but getting Married in May and need the cash
Pictures of car (http://www.picturetrail.com/sfx/album/view/23784431)
Motor in the car is a SBC 350 4 bolt main 1 piece rear main seal which 3.75 forged Scat Crank and 6 inch Forged H-Beam Rods with KB Forged Pistons bored out .30. Motor has a total of 56 miles on it. Has brand new main bearings, connecting rod bearings, and all new gaskets. Its Rotating assembly is Scat Internal balanced. All Forged with H-Beam Rods. Keith Black Forged pistons. Rods are 6in. Trick flow Super 23 195 Alu. Heads,Trick Flow® Roller Rocker Arms, Trick Flow® Chromemoly Pushrods,Trick Flow Hydraulic Flat Tappet Track Max Camshafts (.510/.518 lift ),Trick Flow® Billet Steel Timing Sets, Edelbrock Victor Jr Intake, Holley 750Dp Carb with choke milled off just rebuilt, Moroso 7qt storker oil pan. Exahust is Hooker Super Comp Long Tube Headers, Custom made exhaust that dumps right before axle.Has Weld Pro Star with M/T Drag Radials on the back with Stock Iroc rims and goodyear tires on the front. But I do have Weld Pro Stars with Skinny for the front just needs new tires, Also have the stock back wheels too.
Trans in the car is a brand New TKO600 from Amp Performance. Has Lakewood Blowproof bellhousing. Trans just needs Fluid put in it,torque arm hooked up, Clutch boot install on bellhousing and shifter handle made up. Had custom speedo gear made up so the Speedo will be correct with gears and tires.
Also comes with UMI sub frame connectors never install (weld in kind), Weld Racing Pro Star (front) and complete 150 shot Nitrous Snipper Kit.
Asking 12,500 obo
Would keep but getting Married in May and need the cash
Pictures of car (http://www.picturetrail.com/sfx/album/view/23784431)