1977transam
09-26-2011, 01:28 PM
Parting out my 1986 trans am -
Engine build sheet:
350 SBC
All work done by Wide open technologies (Carol Hines)
Block was bored .20 over. Rotating assembly was balanced.
Engine has:
TrickFlow Aluminum Heads -
195cc intake runners CNC Chambers good to .600 Lift
Edelbrock Performer RPM Air-Gap Intake Manifold
Crane cams 1.6 Full Roller Aluminum Rocker arms
Comp cams – Xtreme Energy Cam 284 Duration. 0.512 in - 0.514 ex
Proform Electric water pump 35 gpm
All arp hardware in engine.
8/18/2006 - Engine Dyno Made: 420 tq 406 hp
8/6/2011 - Chassis Dyno (performance specialties- fun day "1 free run")
400 tq 321 hp @ 5200 (lifted early digital tach had wrong rpm)
Engine was in my 1986 Trans Am Never got to the track.
2500 cash
Engine build sheet:
350 SBC
All work done by Wide open technologies (Carol Hines)
Block was bored .20 over. Rotating assembly was balanced.
Engine has:
TrickFlow Aluminum Heads -
195cc intake runners CNC Chambers good to .600 Lift
Edelbrock Performer RPM Air-Gap Intake Manifold
Crane cams 1.6 Full Roller Aluminum Rocker arms
Comp cams – Xtreme Energy Cam 284 Duration. 0.512 in - 0.514 ex
Proform Electric water pump 35 gpm
All arp hardware in engine.
8/18/2006 - Engine Dyno Made: 420 tq 406 hp
8/6/2011 - Chassis Dyno (performance specialties- fun day "1 free run")
400 tq 321 hp @ 5200 (lifted early digital tach had wrong rpm)
Engine was in my 1986 Trans Am Never got to the track.
2500 cash