Whoboy580
01-12-2012, 03:32 PM
I am parting out my car. Here the info on it.
1986 Chevrolet Camaro Z28.Let me first start off by saying I would really love to keep my car but found a house and need money for down payment. Now back to car. Its a five speed car that has a TKO600 trans. Its like a dark blue color and it in good condition. It is t-top car with new seals. Has a cowl induction hood. It has Brand New Lakewood 90/10 in front and Brand New Lakewood 50/50 with Brand New Stock Height Springs, UMI Panhard Bar Relocation Kit, UMI Adjustable Panhard Bar, 4th Gen Rear, 4.10 Gears, Posi Unit, Competition Engineering Sump Gas Tank, 140 GPH Fuel Pump, S.S. Braid Fuel Lines, Battery Relocation, UMI Wonder Bar, Auto Meter 5in Tach, Auto Meter Water Temp, Auto Meter Oil Pressure,Auto Meter Volt Gauge, Electric Fuel Pump External mounted, 16 inch Electric fan, aluminum radiator.S-10 manual steering box, Spohn TKO600 crossmember with driveshaft loop, Hood mounted it 2 5/8 fuel pressure gauge, complete secondary fuel line ran for nitrous (Holley Blue Pump, holley reg), Nitrous purge kit, Sniper Nitrous kit (Never used on car),Radio delete panel.
Motor in the car is a SBC 350 4 bolt main 1 piece rear main seal which 3.75 forged Scat Crank and 6 inch Forged H-Beam Rods with KB Forged Pistons bored out .30. Motor has a total of 56 miles on it. Has brand new main bearings, connecting rod bearings, and all new gaskets winter of 2010. Its Rotating assembly is Scat Internal balanced. All Forged with H-Beam Rods. Keith Black Forged pistons. Rods are 6in. Trick flow Super 23 195 Alu. Heads,Trick Flow® Roller Rocker Arms, Trick Flow® Chromemoly Pushrods,Trick Flow Hydraulic Flat Tappet Track Max Camshafts (.510/.518 lift ),Trick Flow® Billet Steel Timing Sets, Edelbrock Victor Jr Intake, Holley 750Dp Carb with choke milled off just rebuilt, Moroso 7qt storker oil pan.
Exahust is Hooker Super Comp Long Tube Headers, Custom made exhaust that dumps right before axle. Is currently sitting on the stock wheels with goodyear tires. But will include in the sale Complete set of Weld Pro Star with Mickey Thompson Tires. Could use new front mickey thompson and on rear tire has a screw in it which can be patch from inside.
Trans in the car is a brand New TKO600 from Amp Performance. Has Lakewood Blowproof bellhousing. Had custom speedo gear made up so the Speedo will be correct with gears and tires.
Also just installed UMI sub frame connectors (weld in kind), undercoat paint sprayed after done.
Pictures of car: http://www.picturetrail.com/sfx/album/view/23784431
Video of car at track (all motor): http://www.youtube.com/watch?v=MfXsX...eature=related
-Roller NO Motor,Trans,Driveshaft,Exhaust,Welds Pro Star, Mickey Thompson,Radiator,Nitrous,or Crossmember. 2000.00
-TKO600 (includes Spohn Crossmember,Driveshaft,and shifter handle) 2000.00
-Motor (Information Above) 5000.00
-Exhaust (Information Above) 300.00
-Weld Pro Star with Mickey Thompson 500.00
-Nitrous Kit 200.00
-Radiator 250
Will Sell Whole Everything together for $11,000.00
1986 Chevrolet Camaro Z28.Let me first start off by saying I would really love to keep my car but found a house and need money for down payment. Now back to car. Its a five speed car that has a TKO600 trans. Its like a dark blue color and it in good condition. It is t-top car with new seals. Has a cowl induction hood. It has Brand New Lakewood 90/10 in front and Brand New Lakewood 50/50 with Brand New Stock Height Springs, UMI Panhard Bar Relocation Kit, UMI Adjustable Panhard Bar, 4th Gen Rear, 4.10 Gears, Posi Unit, Competition Engineering Sump Gas Tank, 140 GPH Fuel Pump, S.S. Braid Fuel Lines, Battery Relocation, UMI Wonder Bar, Auto Meter 5in Tach, Auto Meter Water Temp, Auto Meter Oil Pressure,Auto Meter Volt Gauge, Electric Fuel Pump External mounted, 16 inch Electric fan, aluminum radiator.S-10 manual steering box, Spohn TKO600 crossmember with driveshaft loop, Hood mounted it 2 5/8 fuel pressure gauge, complete secondary fuel line ran for nitrous (Holley Blue Pump, holley reg), Nitrous purge kit, Sniper Nitrous kit (Never used on car),Radio delete panel.
Motor in the car is a SBC 350 4 bolt main 1 piece rear main seal which 3.75 forged Scat Crank and 6 inch Forged H-Beam Rods with KB Forged Pistons bored out .30. Motor has a total of 56 miles on it. Has brand new main bearings, connecting rod bearings, and all new gaskets winter of 2010. Its Rotating assembly is Scat Internal balanced. All Forged with H-Beam Rods. Keith Black Forged pistons. Rods are 6in. Trick flow Super 23 195 Alu. Heads,Trick Flow® Roller Rocker Arms, Trick Flow® Chromemoly Pushrods,Trick Flow Hydraulic Flat Tappet Track Max Camshafts (.510/.518 lift ),Trick Flow® Billet Steel Timing Sets, Edelbrock Victor Jr Intake, Holley 750Dp Carb with choke milled off just rebuilt, Moroso 7qt storker oil pan.
Exahust is Hooker Super Comp Long Tube Headers, Custom made exhaust that dumps right before axle. Is currently sitting on the stock wheels with goodyear tires. But will include in the sale Complete set of Weld Pro Star with Mickey Thompson Tires. Could use new front mickey thompson and on rear tire has a screw in it which can be patch from inside.
Trans in the car is a brand New TKO600 from Amp Performance. Has Lakewood Blowproof bellhousing. Had custom speedo gear made up so the Speedo will be correct with gears and tires.
Also just installed UMI sub frame connectors (weld in kind), undercoat paint sprayed after done.
Pictures of car: http://www.picturetrail.com/sfx/album/view/23784431
Video of car at track (all motor): http://www.youtube.com/watch?v=MfXsX...eature=related
-Roller NO Motor,Trans,Driveshaft,Exhaust,Welds Pro Star, Mickey Thompson,Radiator,Nitrous,or Crossmember. 2000.00
-TKO600 (includes Spohn Crossmember,Driveshaft,and shifter handle) 2000.00
-Motor (Information Above) 5000.00
-Exhaust (Information Above) 300.00
-Weld Pro Star with Mickey Thompson 500.00
-Nitrous Kit 200.00
-Radiator 250
Will Sell Whole Everything together for $11,000.00