Where to get an item polished/chromed?

[RiggsLW81]

Have 4 throttle body bolts that look like crap next to all my other polished bolts.

Looking for a place in north nj (preferably northeast and close to the meadowlands/nyc area) to take these bolts to be polished. if no known shops in north willing to hear bout central shops..

any shops/people/#'s you know of would help...thanx

[Blackbirdws6]

I assume these are not stainless or aluminum bolts? I would think about just buying some good quality stainless bolts from McMaster and give them a quick hit on a poilishing wheel. Just a thought.

[RiggsLW81]

wasn't familiair with McMaster, just googled them.. didnt seem to have what I need in the size below.

3.75 length & 5/16 bolts. Looking for 4 in stainless steel - if anyone has any leads, I will forgo the hunt for a shop to polish mine.

[TaKid455]

try fastenal if mcmaster does not have what you want

[chrisfrom nj]

theres a place in west orange on ashland ave that does eletro plateing theres allso a place in newark called mara polishing and plating

[Blackbirdws6]

McMaster

3.75 x 5/16"-18 in SS - 92196A598
4.00 x 5/16"-18 in SS - 92196A142

They have different thread pitches in those sizes as well depending on what you currently have.

[RiggsLW81]

thanks Blackbird..

I must have not been searching in the right place. That is exactly what I'm looking for, so I went ahead and ordered a set.

[RiggsLW81]

back to the drawing board... mcmasters bolts didnt work out even with the fine thread.. just wouldnt fit.

the ones on the tb have 22 threads, mcmasters had 24..

so. is there a difference between electroplating and chroming? ive come to the terms that i need to have the bolts on the car done instead of searching for others..

[Featherburner]

<<edited>>