Window help

[WSex]

my window goes up and down with no motor growl but then stops at a random place opening and closing
has anyone encountered this? im thinking its the switch i might pullout the multimeter later and check the voltages.
who wants to take guesses? and off topic who's willing to sell me either rear coil bags or stock ws6 springs for the rear

[MyFirstZ]

Driver or passenger ?

Will it start working again after a minute or two ? If so window motor. It over heats and kicks a circuit breaker.

[WSex]

yeah takes a minute and starts again. guess window motor it is thanks. driver

[WildBillyT]

my window goes up and down with no motor growl but then stops at a random place opening and closing
has anyone encountered this? im thinking its the switch i might pullout the multimeter later and check the voltages.
who wants to take guesses? and off topic who's willing to sell me either rear coil bags or stock ws6 springs for the rear

More like who hasn't encountered this. :bertstare:

http://shbox.com/page/windowmotor.html

[WSex]

yeah thats what i was thinking after

[WSex]

is 94 fbody window motor same as 98?

[MyFirstZ]

Don't know why you ask ?

Gmpartdirect has them for like 34$ or something like that will nuts and bolts to install so you don't have to rivet it.

[Jersey Mike]

Stock for stock, are rear WS6 springs different than the V6 rear springs?

[WSex]

Don't know why you ask ?

Gmpartdirect has them for like 34$ or something like that will nuts and bolts to install so you don't have to rivet it.

theres a new one ricky d is selling me for 20$

[WSex]

Stock for stock, are rear WS6 springs different than the V6 rear springs?
yeah theyre different

[MyFirstZ]

No idea about that. Try looking up part numbers off GMpartsdirect or rock auto

[WSex]

interchangeable
thanks everyone

[MyFirstZ]

The new one will be bolted in so have a drill handy to drill through the door to be able to drill the old rivets out and put the new bolts in

Very messy since the door is not metal

[WSex]

thanks z
wont be too hard
is there anything i can do to prevent the panel cracking while im in there?

[MyFirstZ]

Not hard at all.

Never heard of it cracking before.

[jam01]

http://shbox.com/1/adj_window.html
here is a link to adjust your window after you install the new motor. i had a link for installing the motor itself, but you can google install university if you need it.