SRGN
07-06-2012, 05:48 PM
After some thinking, I have decided to sell my race car. I bought it from Dave(formerly from Cartek) and have the car almost completed again, albeit milder than when he was racing it. I just don't have time or cash to invest in getting the car back out there. Here's the vitals:
98 Camaro, extreme weight reduction, not streetable. Car was well under 3000 lbs with driver the last time it was weighed. No factory harness so no blinkers or brake lights. 10pt cage, just recertified a couple months ago to 8.50. Aluminum racing seats for driver and passenger. No rear seats or carpets. Subframe connectors, wheelie bars, chute, custom chassis mount torque arm, tubular k member, qa1 coilovers in the front and qa1 non coilovers in the rear. Tubular arms, all the good stuff. Strange brakes in the rear and Wilwood in the front. Rear is a 9" with billet center section, Daytona style pinion support, rifle drilled star cut axles, spool and new never run 3.90 gears installed. Carbon fiber driveshaft, Dedenbear case Powerglide with brake. Current engine is a blueprinted stock LS2 short block, TFS 225 heads, FAST 102mm on top. Car needs some wiring finished, new fuel lines run and a tune. There is more that I cant even think of, no expense was spared when Dave had the car built. All suspension/chassis/cage work was done by the late Leo from Neverlift. PM or post with any questions. More pics available. Asking $17k OBO as it sits or 9k rolling with no electronics or fuel system. Prices negotiable, may consider partial trades. Car is located in Old Bridge NJ 08857.
http://www.youtube.com/watch?feature=player_embedded&v=VLXMM14NWM4
98 Camaro, extreme weight reduction, not streetable. Car was well under 3000 lbs with driver the last time it was weighed. No factory harness so no blinkers or brake lights. 10pt cage, just recertified a couple months ago to 8.50. Aluminum racing seats for driver and passenger. No rear seats or carpets. Subframe connectors, wheelie bars, chute, custom chassis mount torque arm, tubular k member, qa1 coilovers in the front and qa1 non coilovers in the rear. Tubular arms, all the good stuff. Strange brakes in the rear and Wilwood in the front. Rear is a 9" with billet center section, Daytona style pinion support, rifle drilled star cut axles, spool and new never run 3.90 gears installed. Carbon fiber driveshaft, Dedenbear case Powerglide with brake. Current engine is a blueprinted stock LS2 short block, TFS 225 heads, FAST 102mm on top. Car needs some wiring finished, new fuel lines run and a tune. There is more that I cant even think of, no expense was spared when Dave had the car built. All suspension/chassis/cage work was done by the late Leo from Neverlift. PM or post with any questions. More pics available. Asking $17k OBO as it sits or 9k rolling with no electronics or fuel system. Prices negotiable, may consider partial trades. Car is located in Old Bridge NJ 08857.
http://www.youtube.com/watch?feature=player_embedded&v=VLXMM14NWM4