my new project

[emolineaux]

hey guys some may know i was building an 86 monte carlo a few years back but ended up selling it. well ive been in nc for a few months now and finally sold the 88 f250 i had up in nj at my moms house. well with that said and alot of searching, (old gm cars in really bad shape down here are expensive as heck) i found my next projcet. picked up a roller another 1986 monte carlo for $400. needs a good amount of work but its rust free and what ive wanted to build since i sold off my other one.

(my last one i was making into a drag car) this one im going to go with a pro touring style look.

ill have more pictures as i get the free time to work on it.

http://i11.photobucket.com/albums/a158/jankenson/1164_10200334375981199_1293138068_n_zpsb689bb3b.jp g


update 2/3/13

well looks like i have my parts list pretty much set for when i get up to nj.
ill be picking up a ton of parts for this build

complete ls1 with wiring harness and computer

fresh built 4l60e trans

ss front nose conversion stuff

c5 zo6 wheels with tires

ls1 camaro front calipers

ls1 camaro complete dash and center console.

[1320B4U]

Whats your plans for the pro touring look? ss-clone protouring or keeping with the ls look? Powerplant?

[emolineaux]

Whats your plans for the pro touring look? ss-clone protouring or keeping with the ls look? Powerplant?

If I can find all swap parts for good price ill do the SS front swap. 2-3 inch cowl hood. Looking at some 18x9. 18x10 black torque thrusts with polished lip. As far as power plant goes. Im getting a great deal on motor/trans so I have to make a special 9 hour drive back to nj to pick up a complete intake to oil pan with harness accessories and computer. Ls1 with 50k on it and fresh built auto behind that that a good friend has in his garage for me.

Ill also be painting car black and running coilovers front and rear to give me a nice stance with the 18s

[Mike]

I have a complete ss front end and doors. I'll ask my dad if he would sell

[emolineaux]

sounds good mike

[chrisfrom nj]

nice project

[maroman88]

i like this

[MonmouthCtyAntz]

Be patient might have a modded LS1 for ya for a good price soon ;)

[emolineaux]

Be patient might have a modded LS1 for ya for a good price soon ;)


idk if you can beat the price i got for this low mile motor im picking up.

[The Fixer]

Looks like a great start, good luck with it!

[Paul Huryk]

Those cars are some of my favorites as they are just as easy to work on as the thir gens, but have more room inside for 4 peeps.

[emolineaux]

Well plans changed this morning. My friend needed the ls1 so he's giving me an awesome deal on an iron block 6.0 motor with the f body front accessories harness and computer! Which works out since I really wanted another 6.0 motor because I didn't get to enjoy the one I put in my old 98 z much

[emolineaux]

parts list updated in 1st post for this build. cant wait to get this build under way in march!

[emolineaux]

Well I made a trip up to nj to visit family and in the process picked up a few items.
C5 zo6 wheels
SS front end parts
Ls1 with 49k miles
Fresh built 4l60e
Camaro dash and center console

http://i11.photobucket.com/albums/a158/jankenson/FAF511CB-6716-425A-8631-E3CF57788A5D-715-00000056C9D2F15E_zps77806b21.jpg

http://i11.photobucket.com/albums/a158/jankenson/DE948506-72AB-4C82-A54C-08CFC3351B05-715-00000056C5C52199_zps8b4a02a6.jpg

http://i11.photobucket.com/albums/a158/jankenson/2292C3E3-39E2-4431-9BF4-4065626CB1FC-715-00000056C14A3B3B_zps52974e34.jpg

http://i11.photobucket.com/albums/a158/jankenson/B1512098-BB8C-4878-BE19-F6E119563136-715-00000056BC9FD19D_zpsa489426e.jpg

[NastyEllEssWon]

damn dude seems like moving to Carolina has been pretty good to you. got a nice house, nice space to work and now youre making progress to build that monte up. i remember seeing the one in your garage when i picked up some wheels awhile back from you. good to see things working out.

[emolineaux]

damn dude seems like moving to Carolina has been pretty good to you. got a nice house, nice space to work and now youre making progress to build that monte up. i remember seeing the one in your garage when i picked up some wheels awhile back from you. good to see things working out.

thanks man. still have a few more things i want to collect before i start working on the car. i regret selling the last monte i had. i found one here i just couldnt pass up. plus i just looked up my car it since it didnt have motor or trans when i bought it. come to find out it is a z code car so it came with fuel injected 4.3 so ill be able to reuse the fuel tank for this setup just need a fuel pump and run some new lines. instead of replacing everything.

[emolineaux]

update. 3/26/13 have not had much time since i got back from nj and my myrtle beach trips this month. been selling off some of the ls1 parts i know i wouldnt need and with that cash picked up a few parts for the car.

here are a few pics for now.

installed an lh8 oil pan kit. cleaned up motor and painted it chevy orange (have to clean paint off the gasket surfaces) bought a set of 5.3 heads that ill be porting and picked up an edelbrock intake.

also picked up a dual exhaust crossmember from jegs and lsx conversion motor mounts for the monte.

http://i11.photobucket.com/albums/a158/jankenson/208882_540012299376199_1766335471_n_zps438aa16c.jp g

http://i11.photobucket.com/albums/a158/jankenson/575946_539800196064076_1801193719_n_zpsa9848572.jp g

http://i11.photobucket.com/albums/a158/jankenson/64245_539800362730726_1444097380_n_zps10cbddab.jpg
http://i11.photobucket.com/albums/a158/jankenson/6426_539800736064022_91489065_n_zpse43c9d24.jpg

http://i11.photobucket.com/albums/a158/jankenson/486252_540870785957017_183095912_n_zps093a99ef.jpg

[WSex]

looks good

[emolineaux]

looks good

Thanks

[NastyEllEssWon]

how big of a cowl do you plan on tossing on this beast :twisted:

[emolineaux]

how big of a cowl do you plan on tossing on this beast :twisted:

idk lol intake is pretty tall. i guess ill figure out a hood once motor is in the car.

[emolineaux]

Just need to port my set of 5.3 heads and decide on a cam and motor will be pretty much set.
http://i11.photobucket.com/albums/a158/jankenson/A201438E-D569-4702-BD8A-DE7BFFBF3E80-2626-00000130D1570C2E_zps891ce8c6.jpg

[emolineaux]

Well today I test fit the motor in the car. Need to tweek the motor mounts to get it to sit right but here ya go. Don't need much of a cowl hood either just a 2.5-3 inch will be way more than enough. After motor mounts are tweaked I'm going to test fit the ls7 manifolds and downpipes that I picked up.

http://i11.photobucket.com/albums/a158/jankenson/E9139407-AD68-4B9C-93A1-89DDF8F03BF9-4550-0000030D7380E7D9_zps7d159910.jpg

http://i11.photobucket.com/albums/a158/jankenson/BD7CDCDB-772F-4905-904A-F3491A4E8AB9-4550-0000030D6D2B10C8_zpsec6c481c.jpg

[emolineaux]

well the transdapt mounts i picked up that were suppose to be for a g body lsx swap didnt work for me. so i sold them off and picked up a set of s10 lsx swap mounts which as of today fit great (just had to drill 3 new holes in the crossmember but it did the job. motor and trans should be reinstalled by end of the weekend.

but the past few weeks i scored 2 good deals(at least i think deals were good) got a set of 17 inch torque thrust wheels. seller traded me his torque thrust wheels for my z06 replicas and he gave me cash on top of the deal. (i have $200 invested into wheels and tires lol) and i also scored a set of brand new eibach pro-kit springs for under a 3rd the price of retail. box was mangled but springs are brand new.

since i had a little down time with work i started getting a little body work done and test fit the new wheels. doors are pretty beat up so its going to take me some time to get them looking good again.

as far as the front bumper goes im going to be removing the area where the emblem was installed(its raised up from bumper cover) and making it look smooth and clean.

http://i11.photobucket.com/albums/a158/jankenson/5D267B36-9590-4D74-A0D8-36B2F52FCEED-3679-000002BA2EB0D905_zps8324abdc.jpg

http://i11.photobucket.com/albums/a158/jankenson/81EBC65C-B0F0-4FCB-9ED9-D0859A8E21BD-3679-000002BA26C47070_zps7e6d6a77.jpg

http://i11.photobucket.com/albums/a158/jankenson/DADE41D5-9072-47CF-83AF-C6197F8815EF-3679-000002B9F5E4D17A_zpsd1e8df46.jpg

http://i11.photobucket.com/albums/a158/jankenson/32681AEA-38B7-4375-8749-806E140F259E-3679-000002BA0D7B7AC3_zps8c93183b.jpg

[Green_Phoenix_LT1]

Looking awesome so far Eric.

[emolineaux]

motor and trans are officially in the car as of today. put the heads and intake on to see what kind of cowl hood i would need with the new set of motor mounts i had installed. looks like i shouldnt need too big of a hood.

http://i11.photobucket.com/albums/a158/jankenson/81AFDFB8-47A1-40C1-8214-4FB8C923769B-6763-00000525BD9E7E1A_zps92da2880.jpg

http://i11.photobucket.com/albums/a158/jankenson/C895146D-45BE-4C4C-A368-863641E9022F-6763-00000525C504E056_zps743c449c.jpg

http://i11.photobucket.com/albums/a158/jankenson/4275EA99-447D-443B-8FD1-E0991CCFE671-6763-00000525CB871223_zps0bfb9a99.jpg

http://i11.photobucket.com/albums/a158/jankenson/F1125779-A215-4DF2-BC8C-0633591CF7E2-6763-00000525D2C63F67_zps314fda09.jpg

http://i11.photobucket.com/albums/a158/jankenson/434F9360-26D2-4227-9AC1-952AF8AE6964-6763-00000525E0C6ABE4_zps037fc632.jpg

http://i11.photobucket.com/albums/a158/jankenson/66FF50F5-4AB7-4133-9069-73A19D958B4F-6763-00000525ECA4C0BF_zps0eeb5cd6.jpg

http://i11.photobucket.com/albums/a158/jankenson/3DC9F753-D06E-488E-85F9-94AC15940C1E-6763-00000525F1B65A87_zps26e1f133.jpg

[Green_Phoenix_LT1]

Great prgress man!

[grazi]

Cool monte. Is that gonna fit under the stock hood?

[emolineaux]

Cool monte. Is that gonna fit under the stock hood?

no its going to probably need at least a 2 inch cowl hood

[grazi]

no its going to probably need at least a 2 inch cowl hood

Cowl hood would look awesome on there anyway.

[emolineaux]

Cowl hood would look awesome on there anyway.


Yea was planning on getting one anyway I just wanted to make sure I got one that would work with this intake. Still have not figured what color I want to paint her.

[emolineaux]

http://i11.photobucket.com/albums/a158/jankenson/E97B1B55-0B8E-4FB9-A51F-38C9E63A34B0-7552-0000056A1A6740E6_zps96d200e5.jpg

[V]

you should do a custom hood with just a small bulge like the grand nats. even though it would be forward more on your car.

[emolineaux]

you should do a custom hood with just a small bulge like the grand nats. even though it would be forward more on your car.

Originally I wanted to do a 96-97 camaro ss hood scoop on the car

[Mike]

Isn't that intake gonna be waaaay overkill?

[NastyEllEssWon]

i know youre going to hate me on this, but those montes look really sweet with a nice deep white paint job :D

[PolarBear]

Isn't that intake gonna be waaaay overkill?

Yeah, that was my thought when I saw the picture, How many RPM you plan on spinning with that?

[L695speed]

Nice Monte! Now I've got a stupid question. I've ditched plans to go SBC in favor of going LSx for my own car. Figure if I'm keeping this one, might as well go all out and go LSx the first time around. Anyway, the stupid question. What motor mounts are those? They look like plates that bolt directly to the standard SBC clamshell mounts. Where did you get them, and would they work in a third gen F body?

[emolineaux]

Nice Monte! Now I've got a stupid question. I've ditched plans to go SBC in favor of going LSx for my own car. Figure if I'm keeping this one, might as well go all out and go LSx the first time around. Anyway, the stupid question. What motor mounts are those? They look like plates that bolt directly to the standard SBC clamshell mounts. Where did you get them, and would they work in a third gen F body?

they are actually lsx swap mounts made for an s10 that i got from transdapt. they come with frame and engine side mounts. they might work on a third gen. i had to drill new holes in my engine crossmember to get it seated where i wanted.

[emolineaux]

been awhile since i posted. here are a few little updates on the project.

started working on the front end. installed new lowering springs drop spindles ball joints rotors pads and calipers.

http://i11.photobucket.com/albums/a158/jankenson/941736_572288592815236_126197151_n_zps27152ce7.jpg

http://i11.photobucket.com/albums/a158/jankenson/945368_572288746148554_924996662_n_zpsf9174358.jpg

http://i11.photobucket.com/albums/a158/jankenson/480191_572303819480380_859840332_n_zps52dcc1b3.jpg

http://i11.photobucket.com/albums/a158/jankenson/480199_572332259477536_129437114_n_zps07673381.jpg

http://i11.photobucket.com/albums/a158/jankenson/971731_572475369463225_1346231746_n_zps1f90c996.jp g

http://i11.photobucket.com/albums/a158/jankenson/425330_572718949438867_2051134402_n_zpsa2d69f10.jp g

[lowrider095]

monte carlos are cool cars

[greenformula92]

Anything new lately

[emolineaux]

Anything new lately

Not yet. Have not had much time to mess with it. I'll try to get updates this weekend.