Fancy Hardware

[Jersey Mike]

I'm still a little kid and fascinated with shiny object.

First inquiry:

Polished/Stainless/Chromed Coil pack/bracket bolts

I found these via LS1Tech, but the Allen heads are a big turn off. Where can I get them with a regular hex head?

http://www.ebay.com/itm/LSX-LS1-LS6-Trans-Am-Camaro-Stainless-Steel-Coil-Coil-Bracket-bolts-w-washers-/140761348709?pt=Motors_Car_Truck_Parts_Accessories&hash=item20c607ba65&vxp=mtr

http://imageshack.us/scaled/landing/27/96561255.jpg
http://tinyurl.com/ayjk6g3


Links?

[WildBillyT]

I'd stick with the allen stuff, personally. Easy to remove.

If you have GOT to have hex, get the thread pitch and length and go to Fastenal. They can hook you up with whatever you need.

[Blackbirdws6]

McMaster. Go have fun.

[LTb1ow]

Allen heads are ftw, I replaced all the stuff on my motor with em.

[Jersey Mike]

I'd stick with the allen stuff, personally. Easy to remove.

Allen heads are ftw, I replaced all the stuff on my motor with em.

Enlighten me. I've never dealt with them. How is it any better/easier than using a hex head socket & bolt?

[PolarBear]

McMaster. Go have fun.

I also like boltdepot.com (http://www.boltdepot.com/) . McMaster is in NJ though so standard shipping should get you the product the next day, or you can pick it up will-call. The only problem with McMaster is you have to buy a minimum quantity. There is also Fastenal, have many locations in NJ or Ace Hardware.

If you want hex head I bought a bag of the bolts for the coils already in stainless, I can bring them to the Feb meet. If you buy me this (http://www.ebay.com/itm/2006-C6-Corvette-Z06-LS7-Engine-7-0-Liftout-5514-Miles-Swap-LS2-LS3-/310589778677?) Ill give you the bolts for free :kneeslap: . I didnt get washers though, I like those close washers under those Allen head. Now that I see that I like it a lot more than the hex head too :cry:

[Blackbirdws6]

I also like boltdepot.com (http://www.boltdepot.com/) . McMaster is in NJ though so standard shipping should get you the product the next day, or you can pick it up will-call. The only problem with McMaster is you have to buy a minimum quantity.

I've called and ordered $5 worth of hardware before. Never heard of a minimum.

[PolarBear]

I've called and ordered $5 worth of hardware before. Never heard of a minimum.

I only use the online ordering. I mean that you have to buy 10 bolts or what ever, I guess I should have said there is a minimum quantity of hardware usually, whereas at Boltdepot.com I can order one fastener if I like

[Blackbirdws6]

I only use the online ordering. I mean that you have to buy 10 bolts or what ever, I guess I should have said there is a minimum quantity of hardware usually, whereas at Boltdepot.com I can order one fastener if I like

Ahh got it. I buy in bulk for the business usually so its rare I need just one or two but I see what you mean. I do have a bag of bolts for the trans crossmember lol.

[MyFirstZ]

I would go with the allens as well. The coils and brackets see so little torque that they aren't going to be an issue removing down the road and stripping.

I would say 50% of the bolts I deal with on BMWs are torx and allens

that is also 6.49$ towards a fantastic paint job or some Fiske...... lol or rent hahaha

[PolarBear]

or some Fiske......

:drool:

[LTb1ow]

My Mcmaster comes same day.

U jelli?

[Jersey Mike]

I'm content with ordering the Allen head ones in the OP, lke you guys are recommending. I just don't understand why they should be desireable...

[LS1ow]

this car runs and drives to the point were its okay to start worrying about the small stuff like shiney bolts right ?

[Jersey Mike]

Maybe. Worst case it'll be a nice driveway ornament.

How's the turbo build coming along?

[LS1ow]

Maybe. Worst case it'll be a nice driveway ornament.

How's the turbo build coming along?

upgraded to twins and awd.

snow big deal.

[sweetbmxrider]

I'm content with ordering the Allen head ones in the OP, lke you guys are recommending. I just don't understand why they should be desireable...

To some, it looks "cleaner"

[Jersey Mike]

Whatever, screw it.

Thank you! Your order has been placed.

[WildBillyT]

Looks cleaner, tensile strength is 180,000 psi for common allens, easier to put in/take out and harder to strip in certain applications, can use a ball allen wrench in wacky spots that are otherwise inaccessible.

[Jersey Mike]

3 days, and 1 placed order later...

Looks cleaner, tensile strength is 180,000 psi for common allens, easier to put in/take out and harder to strip in certain applications, can use a ball allen wrench in wacky spots that are otherwise inaccessible.

:lol:

[LTb1ow]

Aerospace uses em, therefore you should to.

And you can get the safety wire variants and never have head bolts back out!

[Kat]

Aerospace uses em, therefore you should to.

And you can get the safety wire variants and never have head bolts back out!

Really? Hrm. Interesting. From what I see on the Chinooks is hex head and 12 point stuff

[LTb1ow]

Really? Hrm. Interesting. From what I see on the Chinooks is hex head and 12 point stuff

Well I am talking generator/PCU/CV/GCU etc type of units, all my stuff calls for allen head, NAS1351 etc. In terms of smaller torque applications, its a lot easier and allows you to minimize the size of units.

Also prevents installers from using a 3/8 ratchet on things they shouldn't :rofl:

[Dudbird113]

Just make sure u dnt use allen heads where they need to be torqued down good. Reason be is u can strip the head or break the allen key which ive done plenty of times.

[WildBillyT]

If it's a 3/8-16 bolt @ Grade 8, 50 lb-ft is as high as you should go. Most applications are in the 30-40 lb-ft range.