Line lock question

[grazi]

Why does the parking brake light in dash come on when I activate my line lock. the stays on until I push on the brakes again even after I turn off line lock. It also clicks inside the ABS block when the line lock is on and i press on the brakes also. Is there some sort of sensor in there that knows when there is different pressure from front to back?

[grazi]

It's called a brake system warning light in the manual.

[grazi]

Forget it. It seems to be the combination valve in ABS block sensing different pressure from front to back.

[MyFirstZ]

that's weird. Mine doesn't do it

4 chanel abs or 3

[grazi]

3 channel. No traction control if that's what your asking. I did a quick search and it came up a bunch. Maybe your "sensor" is bad or unplugged. It said alot of people unplug the sensor at track so they don't have to see the light.

[MyFirstZ]

3 channel vs 4 channel abs I believe has one rear brake line and splits in the rear compared to a 4 channel with one for each wheel. So you could be right about the pressures. Try calling the company and asking them if they have heard of it

[deadtrend1]

Forget it. It seems to be the combination valve in ABS block sensing different pressure from front to back.

:nod: