PDA

View Full Version : Feeler; 99/93 Ls1 complete swap/ roller.


02v8ta
10-03-2013, 08:31 PM
I may be moving out of the state by the end of the year and wont be able to take/ store such a project with me. The car/project is under the members projects in here. It's a 99 90,xxx milage Ls1 stock internals w/ headers, tune, and entire ls1 drive train swapped in a 93 shell. Already had it up and running perfect. Wont turn over now due to (I believe) the pcm not reading the ECT sensor and flooding the engine. Stock rear with brand new 3.73s, New MSD wire set and plugs stock rebuilt trans (don't have details) that's all, stock engine.

Since I have to put a price $3400 OBO.
Should be able to resolve the ECT sensor issue for a buyer. The only reason it's a "project" Is it'll need, complete interior installed, new wheels, and your choice of exhaust and it's good to go. Honestly a rather simple yet great project for someone. Worst case it'll sit this winter in a family garage. :|

Serious inquires can get faster results through americangospel01@aol.com
Any tech info Q's try to keep in here please, thanks.

sweetbmxrider
10-04-2013, 07:42 AM
a4 or m6?

The_Bishop
10-04-2013, 08:34 AM
Pics would help, as well.

Jersey Mike
10-04-2013, 09:06 AM
http://www.njfboa.org/forums/showthread.php?t=63525

02v8ta
10-04-2013, 02:46 PM
Thanks Mike, and yes a4.
EVERYTHING is there to swap into your own ride or just simply finish this one.

02v8ta
10-18-2013, 01:35 PM
Still looks like I wont be able to take the car with me so real talk $2800 for a low milage ls1 you can either finish or swap over the drive train to your own project? Probably will let it sit if I can't get close to that. I already converted it to have the ls1 lid (just need hood) and replace the ECT sensor. New plugs and wires and oil and gears and more i'm probably forgetting.

MyFirstZ
10-18-2013, 03:11 PM
I have a buddy who might be interested. I'll give him a shout.

he's got a truck and trailer to

02v8ta
10-25-2013, 05:19 PM
Or trade? Just can't take a project with me.

02v8ta
10-31-2013, 05:33 PM
Market suck for this or what I know it's winter and all. Price not right?

V
10-31-2013, 07:01 PM
the mentioned running issue probably scares some the most plus possible buyers don't know how the swap was done by the previous owner and not sure if shortcuts were taken.

i did consider it for the motor/trans but price is high for just that(for me at least) and not even running 100%. im looking for a wrecked 01-02 t56 car now.

if u fixed the issue im sure you'll have more interest. if you part out the big pieces, and want to sell just the motor then i may be interested.

02v8ta
11-02-2013, 10:36 AM
Fired right up today, my 2nd guess that the a/f mix was off with the pcm disconnected must have been right, no idle issues now or anything.

02v8ta
12-28-2013, 05:44 PM
I still have the car, just been sitting. Would anyone be interested in it AND the $1500 wheel set up currently on the car for 3k? Would sell just wheels vut really need car gone.
Thanks.

omarcamaro
12-28-2013, 08:12 PM
pm sent

nothingfancy
12-28-2013, 09:09 PM
Send pics to stuntbikerider22@gmail.com

omarcamaro
12-31-2013, 12:28 PM
is this still available