PDA

View Full Version : 01 Z28 Parts - Get this outta my shed

Vosko
06-21-2014, 07:59 AM
I am in Parsippany, NJ and i do not own a camaro. So i would like this stuff gone. Otherwise it's going on Ebay or to the scrapyard. I don't have the room to keep it around forever. I'll post pix when requested

LS1 K-Member with pedestals $50
LS1 Front Brakes,Spindles,lines,rotors,pads etc $100
passenger fender $50
front and rear seats - ebony leather- fronts need to be recovered $100
all plastic interior panels $50
both tailights - $50
rear bumper cover $ 50
body control module $20
airbag module $20
6 speed console with rubber boot $50
6 speed pedals $100
6 speed aluminum driveshaft $50
Pacesetter Headers $100
6 speed torque arm $30
Ebony Seatbelts front and rear $50
2 sets of ttops $50 each
NJ Torque
06-21-2014, 09:18 AM
Pictures of the console please.

Do the headers come with a y pipe? Picture?
Vosko
06-21-2014, 09:54 AM
headers have a ypipe, they were uncoated so they are rusty. i have to dig out the console to get pix.
NJ Torque
06-21-2014, 01:34 PM
headers have a ypipe, they were uncoated so they are rusty. i have to dig out the console to get pix.



Interested in pics of both.

to; 732 535 2162
evilz99
06-21-2014, 02:56 PM
Sent you an email. Interested in a few parts
FlyingDutchman
06-21-2014, 05:23 PM
PM sent.
Vosko
06-21-2014, 07:25 PM
Pretty sure I've responded to everyone, everything is still available right now
NJ Torque
06-21-2014, 10:45 PM
I didnt get any pictures.

I can be up there tomorrow.
stealth355tpi
06-23-2014, 07:30 AM
Pm sent
BonzoHansen
06-23-2014, 09:37 AM
any chance you have stock front lower control arms?
siguy
06-24-2014, 12:42 AM
Rear? Pm me
Vosko
06-26-2014, 06:03 AM
I do have the stock lower control arms. They are still attached to the complete front subframe etc

Rear sold a long time ago.

Adding some pics

https://lh6.googleusercontent.com/-ThNzn1tyQLk/U6v-FgJkUUI/AAAAAAAAGFk/S6z-gGtwIyI/s720/20140607_074622.jpg
https://lh4.googleusercontent.com/-7In4jORBaJU/U6v8uHVgwoI/AAAAAAAAGFY/AqUkj4jxbeA/s720/20140625_162006.jpg
https://lh5.googleusercontent.com/-WiKIeRKtFI0/U0MjqtGv1aI/AAAAAAAAF9s/7Nx_C2ZySWA/s1280/20140407_181130.jpg
https://lh5.googleusercontent.com/-U2WdOjaf3PM/U6v-hh5Hg2I/AAAAAAAAGFs/ydStXAwpBX0/s1280/20140621_155925.jpg
https://lh6.googleusercontent.com/-xiGHxfEzWaQ/U6v-jOeWjzI/AAAAAAAAGF0/JFKJF8pPP9A/s1280/20140621_155936.jpg
stealth355tpi
06-26-2014, 06:47 AM
Pm sent again
Hanks Bird
06-26-2014, 08:35 AM
pmsent
qwikz28
06-26-2014, 07:48 PM
Still have the stock k-member?
Vosko
06-27-2014, 11:49 AM
everything is still for sale. only thing pending is the driveshaft
WildBillyT
06-27-2014, 12:30 PM
Got pics of the brake setup?
sweetbmxrider
06-27-2014, 02:20 PM
Got pics of the brake setup?

Kirk has ls1 front brakes on the spindles if you are looking for that.
ThoR294
06-27-2014, 11:45 PM
Got the steering shaft?
NJ Torque
06-29-2014, 10:01 PM
I need that console..... when can I pick it up?
EddieB
06-29-2014, 11:19 PM
Interested in the spindles, are they still available?
Vosko
06-30-2014, 06:23 AM
what you see is what i have. i would prefer to sell the whole front subframe complete. I have not been available due to going racing for the past few days.
EddieB
06-30-2014, 05:31 PM
pm sent
Vosko
07-07-2014, 07:51 PM
I was not around due to the holiday and out of town for racing. Everything is still for sale.
NJ Torque
07-07-2014, 08:42 PM
I need the console and the tail lights. Can I come tomorrow?
Vosko
07-08-2014, 07:46 PM
Tailights and console tentatively sold
Vosko
07-12-2014, 08:13 AM
Everything still available. If its not gone by the end of the month. I am scrapping it all.