1998 Camaro z28 parts (98-2002)

[V]

Parting out a 1998 Z28 ttop car, T56.
Transmission NOT available.

Ask if you need something not listed, just ask.
I just may not have listed it, but most likely it it might have been damaged, or it might have already been sold.

All parts are also Best Offer.


Exterior:
98-02 Camaro headlight brackets, each $30
98-02 Camaro foglights with brackets, each $40
98-02 Camaro front fender/bumper bracket, R or L, each $30
98-02 Camaro front impact bar, metal w/foam, $50
93-02 Camaro door shells, each $50
93-02 Camaro side mirrors, pair $60
93-02 Camaro hatch w/regular spoiler, $40
93-02 Camaro rear bumper $30
93-02 Camaro rear taillight filler panel $40
97-02 Camaro taillight harness $20
93-02 T-top roof center plate, $50
93-02 T-tops, no keys, pair $80
93-02 F-body door glass, each $25
93-02 T-top weatherstripping, each side $40
93-02 F-body T-Top SAIL PANEL, oem, black, no bubbles, completely cut off car, you remove it from the metal though, $200

Mechanical:
Aluminum driveshaft, stock, $50
1998 LS1 fuel tank(metal) with pump/sender $50
ABS block, 4 channel, $40
10 bolt rear, 4 chan, HOUSING $20
10 bolt axles, 4 channel (ASR/Traction) each $50
98-02 rear brakes, Calipers, rotors, backing plates, 4 channel, $100
93-02 stock LCA, only 1, $5
98-02 4 channel rear end speed sensor wiring harness $50
93-02 rear springs $10
93-02 rear spring rubber ISOLATORS, pair $20
1998 z28 rear sway bar, w/endlinks, axle mounts, and chassis brackets $50
1998 z28 front sway bar, no hardware, $25
1998 front sway bar chassis mounts, pair $20
1998 Camaro 5 spoke wheels(4), w/decent tires, $200

Interior:
93-02 rear cloth seats, grey, $50
93-02 passenger front seat, w/track, cloth, grey, $40
93-02 power driver seat track $50
97-02 Camaro lower center console $50
97-02 Camaro dash shell, good airbag, $100
1998 steering column, from t56 car, no key, $40
1998 steering wheel only $40
1998 driver airbag $40
93-02 Camaro interior plastics: grey, NOT EBONY
sail panels $10
kick panels $5
hatch trim $5
93-02 seat belt set, Complete, grey,missing front receiver bolt covers, $75
1998 cloth grey door panels, (power windows/locks), no switches, pair $50


Other parts available but in slightly damaged/possibly useable condition:
1998 front bumper, has a small tear up top, car went under a truck, $40
1998 driver side headlight, foggy and needs refinishing, $20
1998 driver seat, cloth, grey, worn/ripped bolster, NO SEAT TRACK, $10


http://i32.photobucket.com/albums/d50/SmokingSS/2014-05-17164833_zps75ee03ee.jpg
http://i32.photobucket.com/albums/d50/SmokingSS/2014-05-17164813_zpsaa454ff7.jpg

[birdmanjr]

Pm sent

[foxriderry]

i need a couple of weird parts, if you still have them, the little metal thing for the flip out cup holder, (i may consider purchasing the entire console if your not willing to separate), and the L shaped bracket exhaust hanger for the passenger side that located right behind the axle. If you have either of those things i would certainly be interested.

[LTb1ow]

What color are the door panels?

Need the plastic piece that the window and lock switchs clip into.

[shepss217]

Do you still have the wheels and tires?

[V]

yes i do

[band77one]

hey V do you have a center console lid ?

[amargari]

Spare tire? Where are you located?

[V]

I may have a lid, I'll check to see the condition.

I have several spares for 4th gens. I'm in Closter, zip 07624.

[mab6680]

Do you still have the axles? Where are you located

[1986IROCZ28]

Looking for driver side fender cover ... Bumper cover with complete parts to install.... Driver side headlight and Headlight mounting parts ....
http://i158.photobucket.com/albums/t87/xRyanT1982x/car%20pix/6AEACDF9-579D-4E91-AEBE-2970377E6735_zpsiwry0uof.jpg (http://s158.photobucket.com/user/xRyanT1982x/media/car%20pix/6AEACDF9-579D-4E91-AEBE-2970377E6735_zpsiwry0uof.jpg.html)

[1986IROCZ28]

I don't kno if I can manage to get the sheet metal from behind the fender ... The body shop wants to cut and replace mine ... I'm trying to keep my cost down

[V]

98-02 Camaro headlight bracket, Right side only, $30
98-02 Camaro front fender/bumper bracket, Right side only, $30
1998 front bumper, has a small tear up top, car went under a truck, $40
1998 driver side headlight, foggy and needs refinishing(polished/buffed), $20
1998 Drivers fender, lower mounting tab(behind wheel) broken off, $20

That would all come to $140.
Like I mentioned the bumper cover has a tear on the top, I'll get a picture tomorrow and the drivers fender has the lower tab broken off the bottom.

As for metal, I still have the car shell on my trailer, how much of the metal framework would you need? Like from where to where?

I could cut down the middle on the rad support up front and then at the middle of where the front tires sits(like middle of the fender). That'd be $100.(from the '98 z28)
With that whole section, the body shop should be able to dissect exactly what they want.
The area of the frame "rail" further back where the fender meets the door is rusty.

There is some rust on areas of the 98 camaro shell so I can't promise anything till I look closely at the area you need, but I also have a '02 Formula with a great condition metal body that I could also cut the metal from. The front frame/nose structure support between the LS1 birds and camaros should be the same. I would check them out and confirm that first though.

http://i32.photobucket.com/albums/d50/SmokingSS/new/IMG_4140_zps0yh68ipv.jpg

[1986IROCZ28]

Depending on how big the tear is on the bumper I might be able to use it and the same with the fender .... If you have a chance and you could my cell is 8562988191 text me pix of the damaged areas and I'll ask my body guy ... I'm trying to keep my cost as low as possible I'm sure you understand ... And the metal I am looking for is this spot
http://i158.photobucket.com/albums/t87/xRyanT1982x/car%20pix/54FCC375-6F16-4C6F-B189-2C7979CE2237.png_zpsdi2rpdta.jpeg (http://s158.photobucket.com/user/xRyanT1982x/media/car%20pix/54FCC375-6F16-4C6F-B189-2C7979CE2237.png_zpsdi2rpdta.jpeg.html)

[sweetbmxrider]

Many guys will cut that metal out and leave the area for the bolts to mount the fender. Can you get a pic of your damage?

[V]

Here are some up close pics. The rust up front only seems to be surface. The rot looks only to be at the back by the wiper/door hinge area.

http://i32.photobucket.com/albums/d50/SmokingSS/2015-04-09%2019.27.28_zpswbdvrezh.jpg
http://i32.photobucket.com/albums/d50/SmokingSS/2015-04-09%2019.27.44_zpsh6hqwqxf.jpg
http://i32.photobucket.com/albums/d50/SmokingSS/2015-04-09%2019.27.53_zps6qcmqnyo.jpg
http://i32.photobucket.com/albums/d50/SmokingSS/2015-04-09%2019.27.59_zpszdcovb8b.jpg