Assorted 4th gen stuff and more

[V]

Camaro
93-02 GTS REAR blackout covers SOLD
98-02 front bumper IMPACT assembly w/foam $100
93-97 front bumper IMPACT assembly w/fogs $100
93-97 fenders (R or L) red, $100 ea
93-02 rear tail panel, blue or red, $50 ea
93-02 doors (R or L) blue or red, $100 ea
93-02 Hatch w/base/z28 wing(colors: Pewter red or blue) $60 ea
93-02 base wing spoiler, red, blue, green-grey, pewter, $20 ea
97-02 drivers airbag $40
93?-02 passenger airbag $40
'97 30th anniversary grey cloth seats, set $200
97-02 dash vents driver or passenger $15 each(from '97 so lighter grey I think)
93-96 dash shell $150
93-96 dash cluster BEZEL $40
97-02 passenger taillight SOLD
97-02 camaro taillights, daily driver quality only(delamination), pair $10
93-02 mirrors, black or silver, $50 pair

Firebird/Trans am
98-02 base/formula front bumper $150
98-02 base/formula front bumper IMPACT assembly w/fogs $125
93-02 base/formula rear bumper $50
93-02 Firebird passenger door, red $100
93-02 base firebird/formula hatch $10
93-02 firebird/trans am driver rear 1/4 panel $350
93-02 firebird/trans am passenger rear 1/4 panel $350
93-02 F-body front "frame" structure, basically firewall forward $350
98-02 driver headlight SOLD
98-02 passenger headlight SOLD
98-02 honeycomb taillights w/center firebird filler SOLD
93-02 taillight filler, assorted ones, $25 ea
93-02 mirrors, red $50 , green $35

4th gen Engine/mechanical
2001 LS1 camshaft $40
82-02 Energy suspension poly trans mount $2093-97 LT1 SLP CAI $120
82-02 STEEL driveshaft, Three rivers, from '02 formula
LS1 oil pan w/pickup only(no windage tray, oil level sensor, or bolts) $200
2002 241 heads, assembled, w/rockers $125
2002 throttle body, no sensors $50
LS1 AC bracket w/compressor $50
82-02 BOXED OEM rear LCAs, painted black, could use new bushings, $25
LS4 coils on brackets, 7 coils only, one harness damaged $75
LS4 rocker arms $40
4th gen T-tops, $80 pair, $45 ea, 5-6 sets available
4th gen washer fluid tanks $20 ea
3.4l v6 AUTOMATIC transmission 4l60e, from '94, 122k miles, $100
3.8l v6 AUTOMATIC transmission 4l60e, from '99, 107k miles, $100
LT1 AUTOMATIC transmission 4l60e, from '94, CORE, $40
LS1 AUTOMATIC transmission 4l60e, from '02, 40k miles, SOLD
93-02 Torque arm $20
1993 10 bolt rear axle assembly, no brakes $80
98-02 10 bolt 4ch axle shaft $50
98-02 zexel torsen differential, 3.42 ring gear, carrier needs a bolt, c-clips, center block. one bearing. no pinion gear. $50($75 if I can find the clips and block)
richmond gear 82-02 10 bolt install kit, 85% complete, $20
98-02 power steering rack, maybe 93-96 too. $100
99 v6 k member complete $100
94 v8 k member complete $100
3.8l engine mount stands $10
LS1 engine mount stands $40

Other stuff....
Th350 auto trans, $60, better than just a core
'87 305 long block, running condition, $100
"010" 350 engine (intake to pan), rebuilder condition, $100
"Doug Herbet" solid roller cam, was in 383sbc, $100
Crane solid roller lifters $100
4ft 3" exhaust piping $20
78-88 g body/monte ss ac/heater box
88 monte SS driver fender $150
94-02 s10 blazer rear folding seats $40
94-02 2dr S10 blazer headliner, no sunroof $50


I'll add more as I think of them or come across stuff I didn't know I had. The listed stuff so far is probably less than a 1/4 or so of what I have.

[Dudbird113]

Any pics of the 010 block and what needs rebuild on it?

[madness410]

hey paul we were in touch about 98-02 gray interior parts do you have any? also what kind of condition are those t/a filler panels?

[V]

Any pics of the 010 block and what needs rebuild on it?

I will get pictures this week.
The motor came out of a parts/project car I got. The install was never completed. The exhaust, carb, and accessories were never installed. The block did look to have been painted though. I know nothing else about it, hence why worst case scenario its a rebuilder.

hey paul we were in touch about 98-02 gray interior parts do you have any? also what kind of condition are those t/a filler panels?

I do have grey panels but they are currently impossible for me to get to. They are all stacked on my vette and behind shelving I installed months ago. I am slowly trying to dig through the garage and organize stuff. There are parts from at least a dozen cars so trying to remember or figure out what is from which gets a little tough. For a specific color match, you'd have to come here and I can pull the interior parts out then to check for the correct shade of grey.

The fillers are in good shape, one is from a formula and has the red firebird logo, the other is from a Trans am but the logo is completely faded away. It looks pure black, but in direct light you can still see the outline of "Trans Am" and the bird. I have a set of honeycomb lights listed on ebay currently and one filler of the buyers choice would be sold with them. I may even have a 3rd filler though too with some green over spray.

[zuuhlsT/A]

You wouldn't happen to have a set of rear stock or aftermarket LCA's with hardware would you? I was told they are interchangeable between 3 and 4 gens. The bolts and sleeves on mine have basically welded themselves together.

[V]

You wouldn't happen to have a set of rear stock or aftermarket LCA's with hardware would you? I was told they are interchangeable between 3 and 4 gens. The bolts and sleeves on mine have basically welded themselves together.

Yes, I have several sets,
stock set - $10 (2-3 sets available)
stock BOXED set - $20(should have new bushings installed though)
tubular aftermarket set poly-poly, $50

[LTb1ow]

Stock trans mount for a 60e?

[zuuhlsT/A]

Yes, I have several sets,
stock set - $10 (2-3 sets available)
stock BOXED set - $20(should have new bushings installed though)
tubular aftermarket set poly-poly, $50

Hey Paul,
I'll take the aftermarket ones. You got hardware? Don't have time to chase those parts down. PM me when and where is good for you.

Kurt

[V]

Hey Paul,
I'll take the aftermarket ones. You got hardware? Don't have time to chase those parts down. PM me when and where is good for you.

Kurt

PM sent

[Sprayed 99]

Still have the turbo 350? Location?

[V]

yes I do, Closter NJ 07624

[2MCHPWR]

any stock LS1 auto transmissions?

[V]

any stock LS1 auto transmissions?

Nah, I recently sold the one I did have.

[zuuhlsT/A]

Hey Paul, Stepdaughter decided to hit a guardrail last night in her 02 Camaro. Need front nose, hood, passenger fender and assorted brackets.

[NJ Torque]

far shot- any GTA wheels?

[Sprayed 99]

yes I do, Closter NJ 07624

If you only lived closer i would grab it.

[V]

far shot- any GTA wheels?
nah sorry, keeping the one set I have on my 88 GTA

[V]

If you only lived closer i would grab it.

If I ever head down towards south jersey to pick up a car or parts, I could bring it with me. As of right now I don't have plans to but who knows. In that case, I could let you know in case you'd still want it then.

[Sprayed 99]

If I ever head down towards south jersey to pick up a car or parts, I could bring it with me. As of right now I don't have plans to but who knows. In that case, I could let you know in case you'd still want it then.

Yes definitely do. I m usually on here once every few days. Thanks

[Jersey Mike]

Paul,
I'm looking for the bracket that fastens the side skirt to the body on Trans Ams. Do you have one?

http://ls1tech.com/forums/attachments/appearance-detailing/504936d1436170965-trans-am-side-skirt-rocker-molding-0706150418.jpg
http://ls1tech.com/forums/attachments/appearance-detailing/504935d1436170965-trans-am-side-skirt-rocker-molding-0706150418a.jpg
Ignore the caption, unlike the photographer, I DO need this pictured part, :lol:: http://s155.photobucket.com/user/Tom565/media/P1010042.jpg.html

[V]

Paul,
I'm looking for the bracket that fastens the side skirt to the body on Trans Ams. Do you have one?

http://ls1tech.com/forums/attachments/appearance-detailing/504936d1436170965-trans-am-side-skirt-rocker-molding-0706150418.jpg
http://ls1tech.com/forums/attachments/appearance-detailing/504935d1436170965-trans-am-side-skirt-rocker-molding-0706150418a.jpg
Ignore the caption, unlike the photographer, I DO need this pictured part, :lol:: http://s155.photobucket.com/user/Tom565/media/P1010042.jpg.html

well... I know I probably have it. Question is where it is, that I do not know. I wouldn't have a chance to look for it until at least late next week.