11.7 on 18" street tires

[xrelapse13]

Went to the track over the weekend and since I let my buddy borrow my drag radials, I decided to see what I can get out of the car on street tires.

Results were 11.7@127 and a 11.9@127 part throttle for the most part through 1st and 2nd.

2000 WS6
295/35R18 Nitto Invos
T56
3.90s
3800-3900lb raceweight

_mVpM3mXBjk

[Blackbirdws6]

Nice job on 18's. Any plans to put a different wheel/tire combo on it just to see what it would do?

[sweetbmxrider]

_mVpM3mXBjk

1-2 looked fun :)

[xrelapse13]

Nice job on 18's. Any plans to put a different wheel/tire combo on it just to see what it would do?

i may borrow a friend's 28" MT on a 16" wheel to throw on the back and see if i can do 10.5-10.8 or so. Car still has more in it, running way rich at WOT atm.

_mVpM3mXBjk

1-2 looked fun :)

lmao yeah, i tried to go past 50% throttle :rofl:

BTW does the video show up in my original post? It's not working for me.

[Blackbirdws6]

i may borrow a friend's 28" MT on a 16" wheel to throw on the back and see if i can do 10.5-10.8 or so. Car still has more in it, running way rich at WOT atm.



lmao yeah, i tried to go past 50% throttle :rofl:

BTW does the video show up in my original post? It's not working for me.

Not showing up for me but I saw it on Facebook. Do you have it running rich for a reason?

[xrelapse13]

Not showing up for me but I saw it on Facebook. Do you have it running rich for a reason?

hmmm, BMXRider what am i doing wrong? Showed up in your quote but not in my original post?

And nope, just never really had time to dial it in. And when i did some minor adjustments the sensor was old and was reading leaner than actual so the adjustments i made to get it into a decent range were still rich lol. I'll prob actually dial it in before i run it again at the track.

[Blackbirdws6]

hmmm, BMXRider what am i doing wrong? Showed up in your quote but not in my original post?

And nope, just never really had time to dial it in. And when i did some minor adjustments the sensor was old and was reading leaner than actual so the adjustments i made to get it into a decent range were still rich lol. I'll prob actually dial it in before i run it again at the track.

Ahh gotcha. Too busy working on other peoples cars right?

[xrelapse13]

Ahh gotcha. Too busy working on other peoples cars right?

Exactly that, im unfortunately limited on time frame i can use my own dyno, so once i have my own place where im on my own time table i can finally dial my own car in. Customer cars take priority though.

[sweetbmxrider]

hmmm, BMXRider what am i doing wrong? Showed up in your quote but not in my original post?

And nope, just never really had time to dial it in. And when i did some minor adjustments the sensor was old and was reading leaner than actual so the adjustments i made to get it into a decent range were still rich lol. I'll prob actually dial it in before i run it again at the track.

You use everything after the = in the link, including the underscore.

[xrelapse13]

You use everything after the = in the link, including the underscore.

great success :nod:

thanks sir