V
02-28-2018, 05:30 PM
I have the front chassis section cut from a 2002 Firebird Formula.
If you wrecked a 4th gen in the front, you probably need part, or all, of this.
Same for 98-02 Camaro/Firebirds and will work for 93-97 cars with just some holes/mounts being slightly different.
Was NOT from an accident car.
Rails are straight and cut right behind the wheel-well/doghouse panels.
Some slight surface rust here and there. Primer had been sprayed on cut areas and surface rust at time of removal.
Asking $400 OBO.
I also have...
Both rear 1/4 panels from this car (93-02 Firebird/TA) $200 each.
Passenger rear 1/4 panel from a 97 camaro (93-02) $200
Metal impact bars and reinforcements for 93-97 camaro($30), 98-02 camaro($50), and 98-02 firebird base/formula($50)
https://images.craigslist.org/00505_dekf6HEAUgX_1200x900.jpg
https://images.craigslist.org/00f0f_2TjtL0ZvP9z_1200x900.jpg
If you wrecked a 4th gen in the front, you probably need part, or all, of this.
Same for 98-02 Camaro/Firebirds and will work for 93-97 cars with just some holes/mounts being slightly different.
Was NOT from an accident car.
Rails are straight and cut right behind the wheel-well/doghouse panels.
Some slight surface rust here and there. Primer had been sprayed on cut areas and surface rust at time of removal.
Asking $400 OBO.
I also have...
Both rear 1/4 panels from this car (93-02 Firebird/TA) $200 each.
Passenger rear 1/4 panel from a 97 camaro (93-02) $200
Metal impact bars and reinforcements for 93-97 camaro($30), 98-02 camaro($50), and 98-02 firebird base/formula($50)
https://images.craigslist.org/00505_dekf6HEAUgX_1200x900.jpg
https://images.craigslist.org/00f0f_2TjtL0ZvP9z_1200x900.jpg